Foreword

Introduction

1Scope

2Normative references

3Terms and definitions

4Symbols

5Basic standards and vibration test code

6Description of the family of machines

7Characterization of vibration

7.1Direction of measurement

7.2Location of measurements

7.3Magnitude of vibration

7.4Combination of vibration directions

8Instrumentation requirements

8.1General

8.2Mounting of transducers

8.2.1Specification of transducer

8.2.2Fastening of transducers

8.2.3Mechanical filter

8.3Frequency weighting filter

8.4Integration time

8.4.1General

8.4.2Contact actuation

8.4.3Continual contact actuation

8.5Auxiliary equipment

8.6Calibration of the measurement chain

9Testing and operating conditions of the machinery

9.1General

9.2Attached equipment, workpiece and task

9.2.1General

9.2.2Pneumatic machines

9.3Operating conditions

9.4Operators

9.5Test procedure

9.5.1Single sequential and contact actuation

9.5.2Continual contact actuation and continuous actuation

10Measurement procedure and validity

10.1Reported vibration values

10.2Declaration and verification of the vibration emission value

11Test report

Annex AModel test report for vibration emission of fastener driving tools (informative)

Annex BDetermination of uncertainty (normative)

B.1General

B.2Tests on single machines

B.3Tests on batches of machines

Annex CAdditional information for tools with full sequential actuation (informative)

C.1General

C.2Testing and operating conditions

Bibliography