-

Leaded Red Brass, Sand and Centrifugal Castings, 85Cu - 5.0Sn - 5.0Pb - 5.0Zn, As Cast

Standard [NEW] 2026-09-10

SAE AMS 4855H:2026-09-10

Leaded Red Brass, Sand and Centrifugal Castings, 85Cu - 5.0Sn - 5.0Pb - 5.0Zn, As Cast

This specification covers a leaded red brass alloy in the form of sand and centrifugal castings.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Manganese Bronze, Sand and Centrifugal Castings 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn As Cast

Standard [NEW] 2026-09-10

SAE AMS 4860G:2026-09-10

Manganese Bronze, Sand and Centrifugal Castings 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn As Cast

This specification covers a manganese bronze alloy in the form of sand and centrifugal castings.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings, 60Co - 29Cr - 4.5W (Stellite® 6), As Cast

Standard [NEW] 2026-09-10

SAE AMS 5387G:2026-09-10

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings, 60Co - 29Cr - 4.5W (Stellite® 6), As Cast

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Standard [NEW] 2026-09-10

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb, (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr (738), Vacuum Melted, Vacuum Cast, As Cast, or Solution Treated, or Solution and Precipitation Hardened

This specification covers a corrosion- and heat-resistant vacuum melted nickel alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified

Standard [NEW] 2026-09-09

SAE AMS 4985F:2026-09-09

Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified

This specification covers a titanium alloy in the form of investment castings (see 8.6).

Accessibility

111.30 EUR VAT included

104.02 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire, 54Co - 25.5Cr - 10.5Ni - 7.5W (Stellite® 31)

Standard [NEW] 2026-08-24

SAE AMS 5789F:2026-08-24

Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire, 54Co - 25.5Cr - 10.5Ni - 7.5W (Stellite® 31)

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of welding wire.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Forgings, Magnesium Alloy, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

Standard [NEW] 2026-08-18

SAE AMS 4362J:2026-08-18

Forgings, Magnesium Alloy, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

This specification covers a magnesium alloy in the form of die forgings 3 inches (76 mm) and under in nominal thickness at time of heat treatment, hand forgings 6 inches (152 mm) and under in ...

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

STRIP, MOUNTING, NUT INSULATING, FOR AS27212 TERMINAL BOARD

Standard [NEW] 2026-08-14

SAE AS 33731B:2026-08-14

STRIP, MOUNTING, NUT INSULATING, FOR AS27212 TERMINAL BOARD

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High-Temperature, 30Au - 34Pd - 36Ni, 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range

Standard [NEW] 2026-08-03

SAE AMS 4785L:2026-08-03

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High-Temperature, 30Au - 34Pd - 36Ni, 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range

This specification covers a gold-palladium-nickel alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, chips, preforms, and a viscous mixture (paste) of the powder in a suitable ...

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Manganese Bronze, Sand and Centrifugal Castings, 65Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe, High Strength, As Cast

Standard [NEW] 2026-08-03

SAE AMS 4862G:2026-08-03

Manganese Bronze, Sand and Centrifugal Castings, 65Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe, High Strength, As Cast

This specification covers a manganese bronze alloy in the form of sand and centrifugal castings (see 8.5).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe (Inconel® FM92)

Standard [NEW] 2026-08-03

SAE AMS 5675K:2026-08-03

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe (Inconel® FM92)

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 72Ni - 15.5Cr - 1.0Cb(Nb) - 2.4Ti - 0.70Al - 7.0Fe (Inconel® FM69)

Standard [NEW] 2026-08-03

SAE AMS 5778L:2026-08-03

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 72Ni - 15.5Cr - 1.0Cb(Nb) - 2.4Ti - 0.70Al - 7.0Fe (Inconel® FM69)

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718), Consumable Electrode or Vacuum Induction Melted

Standard [NEW] 2026-08-03

SAE AMS 5832K:2026-08-03

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718), Consumable Electrode or Vacuum Induction Melted

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb) (Inconel® FM82)

Standard [NEW] 2026-08-03

SAE AMS 5836F:2026-08-03

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb) (Inconel® FM82)

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Plate, 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al (Alloy 617), Consumable Electrode or Vacuum Induction Melted, Annealed

Standard [CURRENT] 2026-07-23

SAE AMS 5888E:2026-07-23

Nickel Alloy, Corrosion- and Heat-Resistant, Plate, 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al (Alloy 617), Consumable Electrode or Vacuum Induction Melted, Annealed

This specification covers a corrosion- and heat-resistant nickel alloy in the form of plate nominally 2.00 inches (50.8 mm) and under in thickness, inclusive.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings, 40Co - 22Cr - 22Ni - 14.5W - 0.07La (HS188), Solution Heat Treated

Standard [CURRENT] 2026-07-22

SAE AMS 5772G:2026-07-22

Cobalt Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings, 40Co - 22Cr - 22Ni - 14.5W - 0.07La (HS188), Solution Heat Treated

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of bars, forgings, flash-welded rings, and stock for forging or flash-welded rings.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Standard [CURRENT] 2026-07-22

SAE AMS 7731E:2026-07-22

Gold Wire and Ribbon, 99.97Au, Annealed

This specification covers pure gold in the form of wire 0.005 to 0.040 inch (0.012 to 1.000 mm), inclusive, in nominal diameter and ribbon 0.002 to 0.051 inch (0.05 to 1.28 mm), inclusive, in ...

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B (Waspaloy), Consumable Electrode or Vacuum Induction Melted, Annealed

Standard [CURRENT] 2026-07-21

SAE AMS 5544M:2026-07-21

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B (Waspaloy), Consumable Electrode or Vacuum Induction Melted, Annealed

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (HASTELLOY® X), Solution Heat Treated

Standard [CURRENT] 2026-07-21

SAE AMS 5587H:2026-07-21

Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (HASTELLOY® X), Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of seamless tubing.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range

Standard [CURRENT] 2026-07-15

SAE AMS 4780J:2026-07-15

Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range

This specification covers a manganese alloy in the form of powder, preforms, and a viscous mixture (paste) of the powder in a suitable binder.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging or Ring Stock, 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al, (Alloy 617), Consumable Electrode or Vacuum Induction Remelted Annealed

Standard [CURRENT] 2026-07-13

SAE AMS 5887F:2026-07-13

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging or Ring Stock, 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al, (Alloy 617), Consumable Electrode or Vacuum Induction Remelted Annealed

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings under 4 inches (102 mm) in least cross-sectional dimension, and stock of ...

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Alloy Wire, Round, 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 1Zn, Solution Heat Treated

Standard [CURRENT] 2026-06-19

SAE AMS 7735F:2026-06-19

Alloy Wire, Round, 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 1Zn, Solution Heat Treated

This specification covers a palladium-silver alloy in the form of round wire 0.004 to 0.080 inch (0.10 to 2.03 mm), inclusive, in nominal diameter (see 8.5).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Phosphor Bronze, Sheet, Strip, and Plate, 94.5Cu - 4.0Sn - 0.19P, Spring Temper (H08)

Standard [CURRENT] 2026-06-15

SAE AMS 4510K:2026-06-15

Phosphor Bronze, Sheet, Strip, and Plate, 94.5Cu - 4.0Sn - 0.19P, Spring Temper (H08)

This specification covers a copper alloy (phosphor bronze) in the form of sheet, strip, and plate (see 8.6).

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Leaded Phosphor Bronze Strip, 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P, Cold Rolled, Half Hard (H02)

Standard [CURRENT] 2026-06-08

SAE AMS 4520N:2026-06-08

Leaded Phosphor Bronze Strip, 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P, Cold Rolled, Half Hard (H02)

This specification covers a copper alloy in the form of strip (see 8.6).

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Foil, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (Alloy 625), Consumable Electrode Remelted, Cold Rolled and Annealed

Standard [CURRENT] 2026-06-08

SAE AMS 5879F:2026-06-08

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Foil, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (Alloy 625), Consumable Electrode Remelted, Cold Rolled and Annealed

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and foil 0.100 inch (2.54 mm) and under in nominal thickness.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti

Standard [CURRENT] 2026-05-19

SAE AMS 7852D:2026-05-19

Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti

This specification covers a columbium (niobium) alloy in the form of sheet, strip, and plate.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed

Standard [CURRENT] 2026-05-19

SAE AMS 7857D:2026-05-19

Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed

This specification covers a columbium (niobium) alloy in the form of bars, rods, and extrusions.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Ultrasonic Inspection, Thin Wall Metal Tubing

Standard [CURRENT] 2026-05-10

SAE AMS 2634D:2026-05-10

Ultrasonic Inspection, Thin Wall Metal Tubing

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over ...

Accessibility

129.50 EUR VAT included

121.03 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings, 52Co - 20Cr - 10Ni - 15W (L-605)

Standard [CURRENT] 2026-05-02

SAE AMS 5759P:2026-05-02

Cobalt Alloy, Corrosion- and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings, 52Co - 20Cr - 10Ni - 15W (L-605)

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Forging Stock, 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat Treated

Standard [CURRENT] 2026-05-01

SAE AMS 5766G:2026-05-01

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Forging Stock, 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat Treated

This specification covers a corrosion- and heat-resistant iron-nickel-chromium alloy in the form of bars and forgings 4.0 inches (102 mm) and under and forging stock of any size.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings, 98Cu - 1.9Be, Solution Heat Treated (TB00)

Standard [CURRENT] 2026-04-21

SAE AMS 4650P:2026-04-21

Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings, 98Cu - 1.9Be, Solution Heat Treated (TB00)

This specification covers a copper-beryllium alloy in the form of bars, rods, shapes, and forgings (see 8.5).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel Alloy Castings, Investment, Corrosion- and Heat-Resistant, 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr (IN-100), Vacuum Melted, Vacuum Cast, As-Cast

Standard [CURRENT] 2026-04-20

SAE AMS 5397G:2026-04-20

Nickel Alloy Castings, Investment, Corrosion- and Heat-Resistant, 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr (IN-100), Vacuum Melted, Vacuum Cast, As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, (RA333®), Solution Heat Treated

Standard [CURRENT] 2026-04-12

SAE AMS 5593J:2026-04-12

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, (RA333®), Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings and Heading, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe (Inconel® X750), Equalized, Precipitation Hardenable

Standard [CURRENT] 2026-04-12

SAE AMS 5667R:2026-04-12

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings and Heading, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe (Inconel® X750), Equalized, Precipitation Hardenable

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Magnesium Alloy, Investment Castings, 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6), Solution and Precipitation Heat Treated

Standard [CURRENT] 2026-04-08

SAE AMS 4452G:2026-04-08

Magnesium Alloy, Investment Castings, 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6), Solution and Precipitation Heat Treated

This specification covers a magnesium alloy in the form of investment castings (see 8.6).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Magnesium Alloy, Investment Castings, 9.0Al - 2.0Zn (AZ92A-T6), Solution and Precipitation Heat Treated

Standard [CURRENT] 2026-04-07

SAE AMS 4453H:2026-04-07

Magnesium Alloy, Investment Castings, 9.0Al - 2.0Zn (AZ92A-T6), Solution and Precipitation Heat Treated

This specification covers a magnesium alloy in the form of investment castings (see 8.6).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Half Hard (H02)

Standard [CURRENT] 2026-04-07

SAE AMS 4507K:2026-04-07

Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Half Hard (H02)

This specification covers a copper-zinc alloy (brass) in the form of sheet, strip, and plate (see 8.6).

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Columbium (Niobium) Sheet, Strip, and Foil

Standard [CURRENT] 2026-04-01

SAE AMS 7850F:2026-04-01

Columbium (Niobium) Sheet, Strip, and Foil

This specification covers columbium in the form of sheet, strip, plate, and foil.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Castings, Leaded Bronze, Sand and Centrifugal, 80Cu - 10Sn - 9.5Pb, As Cast

Standard [CURRENT] 2026-03-24

SAE AMS 4842H:2026-03-24

Castings, Leaded Bronze, Sand and Centrifugal, 80Cu - 10Sn - 9.5Pb, As Cast

This specification covers a leaded bronze in the form of sand and centrifugal castings (see 8.6).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed

Standard [CURRENT] 2026-03-13

SAE AMS 4382E:2026-03-13

Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed

This specification covers a magnesium alloy in the form of plate 0.250 to 6.000 inches (6.35 to 152.40 mm), inclusive, in nominal thickness (see 8.5).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings and Rings, 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al (Nimonic® Alloy 263), Consumable Electrode or Vacuum Induction Melted, 2100 °F (1149 °C) Solution Heat Treated

Standard [CURRENT] 2026-03-13

SAE AMS 5886E:2026-03-13

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings and Rings, 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al (Nimonic® Alloy 263), Consumable Electrode or Vacuum Induction Melted, 2100 °F (1149 °C) Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging or flash-welded rings.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Evaluation of Coking Propensity of Aviation Lubricants in an Air-Oil Mist Environment Using the Vapor Phase Coker

Standard [CURRENT] 2026-03-13

SAE ARP 5921A:2026-03-13

Evaluation of Coking Propensity of Aviation Lubricants in an Air-Oil Mist Environment Using the Vapor Phase Coker

This method is designed to evaluate the coking propensity of synthetic ester-based aviation lubricants under two phase air-oil mist conditions as found in certain parts of a gas turbine engine ...

Accessibility

111.30 EUR VAT included

104.02 EUR VAT excluded

To selection

Copper-Beryllium Alloy, Sheet and Strip, 98Cu - 1.9Be, Half Hard (TD02)

Standard [CURRENT] 2026-02-20

SAE AMS 4532J:2026-02-20

Copper-Beryllium Alloy, Sheet and Strip, 98Cu - 1.9Be, Half Hard (TD02)

This specification covers one type of copper-beryllium alloy in the form of sheet and strip up to 0.188 inch (4.78 mm) in nominal thickness (see 8.7).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Tantalum Sheet, Strip, and Plate, Annealed

Standard [CURRENT] 2026-02-17

SAE AMS 7849F:2026-02-17

Tantalum Sheet, Strip, and Plate, Annealed

This specification covers tantalum in the form of sheet, strip, plate, and foil up through 0.1875 inch (4.75 mm), inclusive (see 8.7).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Copper-Beryllium Alloy Sheet, Strip, and Plate, 98Cu - 1.9Be, Solution Heat Treated (TB00)

Standard [CURRENT] 2026-02-11

SAE AMS 4530K:2026-02-11

Copper-Beryllium Alloy Sheet, Strip, and Plate, 98Cu - 1.9Be, Solution Heat Treated (TB00)

This specification covers one type of copper-beryllium alloy in the form of sheet, strip, and plate (see 8.6).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Magnesium Alloy, Extrusions, 6.5Al - 0.95Zn (AZ61A-F), As Extruded

Standard [CURRENT] 2026-02-06

SAE AMS 4350P:2026-02-06

Magnesium Alloy, Extrusions, 6.5Al - 0.95Zn (AZ61A-F), As Extruded

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Plate, Magnesium Alloy, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26), Cold Rolled and Partially Annealed

Standard [CURRENT] 2026-02-06

SAE AMS 4376J:2026-02-06

Plate, Magnesium Alloy, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26), Cold Rolled and Partially Annealed

This specification covers a magnesium alloy in the form of plate 0.250 to 2.000 inches (6.35 to 50.80 mm), inclusive, in nominal thickness (see 8.5).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings

Standard [CURRENT] 2026-02-01

SAE AMS 2372J:2026-02-01

Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of carbon and low-alloy steel forgings.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing and Forging Stock, 16Cr - 2.5Ni (SAE 51431), Aircraft Quality

Standard [CURRENT] 2026-01-31

SAE AMS 5628G:2026-01-31

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing and Forging Stock, 16Cr - 2.5Ni (SAE 51431), Aircraft Quality

This specification covers a heat-treatable, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and stock for forging or heading.

Accessibility

119.80 EUR VAT included

111.96 EUR VAT excluded

To selection

Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution and Precipitation Heat Treated (TF00, formerly AT)

Standard [CURRENT] 2026-01-27

SAE AMS 4533F:2026-01-27

Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution and Precipitation Heat Treated (TF00, formerly AT)

This specification covers a copper-beryllium alloy in the form of bars and rods (see 8.5).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Magnesium Alloy, Investment Castings, 10Al (AM100A-T6), Solution and Precipitation Heat Treated

Standard [CURRENT] 2026-01-23

SAE AMS 4455J:2026-01-23

Magnesium Alloy, Investment Castings, 10Al (AM100A-T6), Solution and Precipitation Heat Treated

This specification covers a magnesium alloy in the form of investment castings (see 8.6).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Ice Penetration Test Method for AMS1431 and AMS1435 Runway Deicing/Anti-Icing Products

Standard [CURRENT] 2026-01-23

SAE AS 6211A:2026-01-23

Ice Penetration Test Method for AMS1431 and AMS1435 Runway Deicing/Anti-Icing Products

This document establishes a standardized test method designed to provide stakeholders - including runway deicing/anti-icing product manufacturers, users, regulators, and airport authorities - with ...

Accessibility

115.60 EUR VAT included

108.04 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 59Ni - 22Cr - 2Mo - 14W - 0.35Al - 0.03La (Alloy No. 230®), Solution Heat Treated

Standard [CURRENT] 2025-12-18

SAE AMS 5878F:2025-12-18

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 59Ni - 22Cr - 2Mo - 14W - 0.35Al - 0.03La (Alloy No. 230®), Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate 0.015 to 1.5 inches (0.38 to 38 mm) in nominal thickness.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Aerospace series. Steel and heat-resisting alloys for wrought products. Technical specification. Remelting stocks

Standard [CURRENT] 2025-12-16

BS EN 4700-007:2025-12-16

Aerospace series. Steel and heat-resisting alloys for wrought products. Technical specification. Remelting stocks

Accessibility

from 298.10 EUR VAT included

from 278.60 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY® S), Consumable Electrode Remelted, Solution Heat Treated

Standard [CURRENT] 2025-12-15

SAE AMS 5873H:2025-12-15

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY® S), Consumable Electrode Remelted, Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging, Rings and Heading, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY® S), Consumable Electrode Remelted, Solution Heat Treated

Standard [CURRENT] 2025-12-10

SAE AMS 5711G:2025-12-10

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging, Rings and Heading, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY® S), Consumable Electrode Remelted, Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Standard [CURRENT] 2025-12-01

SAE AMS 2675J:2025-12-01

Brazing, Nickel Alloy Filler Metal

This specification covers the requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of nickel alloy filler metal.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars Forgings and Forging Stock, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe (Incoloy® 901), Consumable Electrode Remelted or Vacuum Induction Melted, Solution, Stabilization, and Precipitation Heat Treated

Standard [CURRENT] 2025-11-13

SAE AMS 5660N:2025-11-13

Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars Forgings and Forging Stock, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe (Incoloy® 901), Consumable Electrode Remelted or Vacuum Induction Melted, Solution, Stabilization, and Precipitation Heat Treated

This specification covers a corrosion- and heat-resistant nickel-iron alloy in the form of bars and forgings 5 inches (127 mm) and under in nominal diameter or least distance between parallel ...

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Quality Assurance Sampling and Testing, Corrosion- and Heat-Resistant Steels and Alloys, Wrought Products and Forging Stock

Standard [CURRENT] 2025-11-12

SAE AMS 2371M:2025-11-12

Quality Assurance Sampling and Testing, Corrosion- and Heat-Resistant Steels and Alloys, Wrought Products and Forging Stock

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion- and heat-resistant ...

Accessibility

111.30 EUR VAT included

104.02 EUR VAT excluded

To selection

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe (N-155), Solution Heat Treated

Standard [CURRENT] 2025-11-03

SAE AMS 5769H:2025-11-03

Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe (N-155), Solution Heat Treated

This specification covers a corrosion- and heat-resistant alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Magnesium Alloy Castings, Sand, 6.0Al - 3.0Zn (AZ63-T6), Solution and Precipitation Heat Treated

Standard [CURRENT] 2025-10-23

SAE AMS 4424M:2025-10-23

Magnesium Alloy Castings, Sand, 6.0Al - 3.0Zn (AZ63-T6), Solution and Precipitation Heat Treated

This specification covers a magnesium alloy in the form of sand castings (see 8.6).

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast

Standard [CURRENT] 2025-10-23

SAE AMS 4845K:2025-10-23

Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast

This specification covers a tin bronze in the form of sand and centrifugal castings (see 8.5).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat Treated

Standard [CURRENT] 2025-10-16

SAE AMS 5854D:2025-10-16

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, wire, forgings, flash-welded rings, and extrusions 4 inches (102 mm) and under in nominal diameter or ...

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni - 19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718SPF), Vacuum Induction and Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable

Standard [CURRENT] 2025-10-15

SAE AMS 5950E:2025-10-15

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni - 19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718SPF), Vacuum Induction and Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet and strip 0.080 inch (2.03 mm) and under in nominal thickness.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed

Standard [CURRENT] 2025-10-03

SAE AMS 5794G:2025-10-03

Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed

This specification covers a corrosion- and heat-resistant iron alloy in the form of welding wire.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant, 67Ni - 31Cu (Monel® 400), Annealed

Standard [CURRENT] 2025-10-02

SAE AMS 4731E:2025-10-02

Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant, 67Ni - 31Cu (Monel® 400), Annealed

This specification covers a corrosion-resistant nickel-copper alloy in the form of wire and ribbon.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast

Standard [CURRENT] 2025-09-12

SAE AMS 5388L:2025-09-12

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV and Hastelloy® B), As-Cast

Standard [CURRENT] 2025-08-22

SAE AMS 5396G:2025-08-22

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV and Hastelloy® B), As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Training and Approval of Thermal Processing Personnel

Standard [CURRENT] 2025-08-22

SAE ARP 1962C:2025-08-22

Training and Approval of Thermal Processing Personnel

This SAE Aerospace Recommended Practice (ARP) describes training and approval of personnel performing certain thermal processing and associated operations that could have a material impact on the ...

Accessibility

111.30 EUR VAT included

104.02 EUR VAT excluded

To selection

Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated

Standard [CURRENT] 2025-08-07

SAE AMS 5221G:2025-08-07

Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated

This specification covers an iron-nickel alloy in the form of strip 0.020 to 0.250 inch (0.51 to 6.35 mm), inclusive, in thickness.

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Composite and Bonded Structure Technician/Specialist Training Document

Standard [CURRENT] 2025-07-25

SAE AIR 4938D:2025-07-25

Composite and Bonded Structure Technician/Specialist Training Document

This document establishes the minimum curriculum requirements for training, practical assessments, and certifying composite structure repair personnel and metalbond repair personnel. It ...

Accessibility

163.70 EUR VAT included

152.99 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo (Stellite® 30) As-Cast

Standard [CURRENT] 2025-07-22

SAE AMS 5380H:2025-07-22

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo (Stellite® 30) As-Cast

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb (Nb) - 0.70Ti - 0.05C - 6.0Al - 0.010 - 0.10Zr (IN-713 - Low Carbon) Vacuum Cast, As-Cast

Standard [CURRENT] 2025-07-18

SAE AMS 5377H:2025-07-18

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb (Nb) - 0.70Ti - 0.05C - 6.0Al - 0.010 - 0.10Zr (IN-713 - Low Carbon) Vacuum Cast, As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W (Stellite® 31) As-Cast

Standard [CURRENT] 2025-07-18

SAE AMS 5382L:2025-07-18

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W (Stellite® 31) As-Cast

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo (Stellite® 21) As-Cast

Standard [CURRENT] 2025-07-18

SAE AMS 5385J:2025-07-18

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo (Stellite® 21) As-Cast

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants

Standard [CURRENT] 2025-07-17

SAE AS 5780E:2025-07-17

Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants

This specification defines basic physical, chemical, and performance limits for 5 cSt grades of gas turbine engine lubricating oils used in aero and aero-derived marine and industrial ...

Accessibility

129.50 EUR VAT included

121.03 EUR VAT excluded

To selection

Alloy, Corrosion- and Heat-Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155) As-Cast

Standard [CURRENT] 2025-07-16

SAE AMS 5376J:2025-07-16

Alloy, Corrosion- and Heat-Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155) As-Cast

This specification covers a corrosion- and heat-resistant iron alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (Hastelloy® X) As-Cast

Standard [CURRENT] 2025-07-16

SAE AMS 5390H:2025-07-16

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (Hastelloy® X) As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr (IN-713) Vacuum Cast, As-Cast

Standard [CURRENT] 2025-07-16

SAE AMS 5391J:2025-07-16

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr (IN-713) Vacuum Cast, As-Cast

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

Accessibility

107.00 EUR VAT included

100.00 EUR VAT excluded

To selection

Cobalt Alloy, Corrosion- and Heat-Resistant, Hardfacing Rod and Wire 62Co - 27 Cr - 2.9Ni - 5.5Mo (Stellite® 21)

Standard [CURRENT] 2025-07-16

SAE AMS 5819B:2025-07-16

Cobalt Alloy, Corrosion- and Heat-Resistant, Hardfacing Rod and Wire 62Co - 27 Cr - 2.9Ni - 5.5Mo (Stellite® 21)

This specification covers a corrosion- and heat-resistant cobalt alloy in the form of welding rods or wrought wire.

Accessibility

80.30 EUR VAT included

75.05 EUR VAT excluded

To selection

Beryllium Near-Net Preforms, Standard Grade, Hot Isostatic Pressed

Standard [CURRENT] 2025-07-16

SAE AMS 7908F:2025-07-16

Beryllium Near-Net Preforms, Standard Grade, Hot Isostatic Pressed

This specification covers beryllium in the form of bar, rod, tubing, and shapes fabricated from beryllium powder consolidated by hot isostatic pressing (HIP) (see 8.5).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (Alloy 625) Solution Heat Treated

Standard [CURRENT] 2025-07-14

SAE AMS 5869E:2025-07-14

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (Alloy 625) Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 1.000 inch (25.40 mm) in nominal thickness.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Standard [CURRENT] 2025-07-09

SAE AMS 2821A:2025-07-09

Salts, Heat-Treating (for Metals)

This specification covers the procurement of granular heat-treating salts suitable for use in the molten state.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction

Standard [CURRENT] 2025-07-09

SAE AMS 5223H:2025-07-09

Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction

This specification covers an iron-nickel alloy in the form of strip 0.020 to 0.1874 inch (0.51 to 4.760 mm), inclusive, in nominal thickness.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened

Standard [CURRENT] 2025-07-09

SAE AMS 5844K:2025-07-09

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened

This specification covers a high-strength, corrosion-resistant alloy in the form of bars up to 1.75 inches (44.4 mm) in diameter (see 8.2).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged

Standard [CURRENT] 2025-07-09

SAE AMS 5845L:2025-07-09

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged

This specification covers a high-strength, corrosion-resistant alloy in the form of bar up to 1.75 inches (44.4 mm) in diameter (see 8.2).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened

Standard [CURRENT] 2025-06-30

SAE AMS 3052B:2025-06-30

Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened

This specification covers grease for use within an aircraft. It also defines the quality control requirements to assure batch conformance and materials traceability and the procedures to manage ...

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection

Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV

Standard [CURRENT] 2025-06-27

SAE AMS 1428M:2025-06-27

Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV

The AMS1428 specification defines the technical requirements for Type II, III, and IV aircraft deicing/anti-icing fluids. These non-Newtonian thickened fluids are formulated to effectively remove ...

Accessibility

155.20 EUR VAT included

145.05 EUR VAT excluded

To selection

Brazing, Silver For Use Up to 800 °F (427 °C)

Standard [CURRENT] 2025-06-17

SAE AMS 2664G:2025-06-17

Brazing, Silver For Use Up to 800 °F (427 °C)

This specification covers the engineering requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of silver alloy filler metals and ...

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Magnesium Alloy, Sheet and Plate, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H24), Cold Rolled, Partially Annealed

Standard [CURRENT] 2025-06-17

SAE AMS 4377K:2025-06-17

Magnesium Alloy, Sheet and Plate, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H24), Cold Rolled, Partially Annealed

This specification covers a magnesium alloy in the form of sheet and plate 0.016 to 3.000 inches (0.41 to 76.20 mm) in nominal thickness (see 8.6).

Accessibility

84.50 EUR VAT included

78.97 EUR VAT excluded

To selection

Magnesium Alloy Castings, Sand, 8.7Al - 0.70Zn (AZ91C-T6), Solution Heat Treated and Aged

Standard [CURRENT] 2025-06-17

SAE AMS 4437G:2025-06-17

Magnesium Alloy Castings, Sand, 8.7Al - 0.70Zn (AZ91C-T6), Solution Heat Treated and Aged

This specification covers a magnesium alloy in the form of sand castings (see 8.6).

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Aluminum Bronze, Centrifugal and Chill Castings, 85Cu - 11Al - 3.6Fe, As Cast

Standard [CURRENT] 2025-06-17

SAE AMS 4870G:2025-06-17

Aluminum Bronze, Centrifugal and Chill Castings, 85Cu - 11Al - 3.6Fe, As Cast

This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings (see 8.5).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed

Standard [CURRENT] 2025-06-17

SAE AMS 4881E:2025-06-17

Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed

This specification covers a nickel-aluminum-bronze alloy in the form of sand, centrifugal, and continuous castings (see 8.5).

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging, Ring and Heading Stock 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La (Alloy 230®) Solution Heat Treated

Standard [CURRENT] 2025-06-17

SAE AMS 5891D:2025-06-17

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging, Ring and Heading Stock 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La (Alloy 230®) Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings 74Ni - 7.0Cr - 16.5Mo (Hastelloy® N) Solution Heat Treated

Standard [CURRENT] 2025-05-16

SAE AMS 5771H:2025-05-16

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings 74Ni - 7.0Cr - 16.5Mo (Hastelloy® N) Solution Heat Treated

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging or flash-welded rings.

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Standard [CURRENT] 2025-05-03

SAE AMS 1476D:2025-05-03

Deodorant, Aircraft Toilet

This specification covers a biodegradable deodorant in the form of a liquid concentrate, solid, or gel.

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TF00)

Standard [CURRENT] 2025-05-03

SAE AMS 4511B:2025-05-03

Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TF00)

This specification covers a copper-beryllium alloy in the form of sand, investment, or centrifugal castings (see 8.7).

Accessibility

96.30 EUR VAT included

90.00 EUR VAT excluded

To selection

Molybdenum Alloy Bars, 0.48Ti - 0.09Zr - 0.02C, Arc Cast, Stress Relieved

Standard [CURRENT] 2025-05-03

SAE AMS 7819F:2025-05-03

Molybdenum Alloy Bars, 0.48Ti - 0.09Zr - 0.02C, Arc Cast, Stress Relieved

This specification covers an arc-cast molybdenum alloy in the form of round bars 0.125 to 4.5 inches (3.00 to 112.50 mm), inclusive (see 8.6).

Accessibility

91.00 EUR VAT included

85.05 EUR VAT excluded

To selection

Standard [CURRENT] 2025-05-03

SAE AMS 7902H:2025-05-03

Beryllium Sheet and Plate, 98Be

This specification covers beryllium in the form of sheet and plate produced by hot rolling beryllium with nominal thicknesses from 0.020 to 1.000 inches (0.51 to 25.4 mm), inclusive (see 8.5).

Accessibility

101.70 EUR VAT included

95.05 EUR VAT excluded

To selection