SAE Aerospace Material Specifications

Adhesive, Acrylic Base, for Acrylic Plastic

Standard [CURRENT] 2016-06-29

SAE AMS-A-8576A:2016-06-29

Adhesive, Acrylic Base, for Acrylic Plastic

120.10 EUR VAT included

112.24 EUR VAT excluded

To selection

Standard [CURRENT] 2017-06-13

SAE AMS-A-21180C:2017-06-13

Aluminum-Alloy Castings, High Strength

This specification covers the requirements for six alloy compositions, four inspection classes, four radiographic quality grades and six classes of mechanical properties of high strength ...

142.20 EUR VAT included

132.90 EUR VAT excluded

To selection

Standard [CURRENT] 2018-03-15

SAE AMS-A-22771D:2018-03-15

Aluminum Alloy Forgings, Heat Treated

The initial SAE publication of this document was taken directly from U.S. Military Standard MIL-A-22771D. This SAE Standard may retain the same part numbers established by the original military ...

142.20 EUR VAT included

132.90 EUR VAT excluded

To selection

Adhesive, Film Form Metallic Structural Sandwich Construction

Standard [CURRENT] 2022-10-04

SAE AMS-A-25463:2022-10-04

Adhesive, Film Form Metallic Structural Sandwich Construction

This specification covers the requirements for adhesives in film form for bonding metal facings to metal cores and to metal components of sandwich panels which are intended for use in primary and ...

136.50 EUR VAT included

127.57 EUR VAT excluded

To selection

Standard [CURRENT] 2018-01-26

SAE AMS-A-81596A:2018-01-26

Aluminum Foil for Sandwich Construction

This specification covers the requirements of uncoated aluminum alloy foil for core materials required for structural sandwich construction.

96.80 EUR VAT included

90.47 EUR VAT excluded

To selection

Standard [CURRENT] 2016-08-15

SAE AMS-B-20148C:2016-08-15

Brazing Sheet, Aluminum Alloy

106.20 EUR VAT included

99.25 EUR VAT excluded

To selection

Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Standard [CURRENT] 2019-06-10

SAE AMS-C-6183B:2019-06-10

Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required.

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Core Material, Aluminum, for Sandwich Construction

Standard [CURRENT] 2022-08-10

SAE AMS-C-7438A:2022-08-10

Core Material, Aluminum, for Sandwich Construction

This specification covers treated aluminum core material for structural sandwich construction.

145.80 EUR VAT included

136.26 EUR VAT excluded

To selection

Core Material, Plastic Honeycomb, Laminated Glass Fabric Base for Aircraft Structural and Electronic Applications

Standard [CURRENT] 2022-08-10

SAE AMS-C-8073:2022-08-10

Core Material, Plastic Honeycomb, Laminated Glass Fabric Base for Aircraft Structural and Electronic Applications

This specification covers the requirements for glass fabric base plastic honeycomb core materials for aircraft structural applications, including aircraft exterior parts, such as radio and radar ...

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Standard [CURRENT] 2015-10-22

SAE AMS-C-8837A:2015-10-22

Coating, Cadmium (Vacuum Deposited)

This specification covers the requirements for three types and three classes for vacuum deposited cadmium coating.

117.80 EUR VAT included

110.09 EUR VAT excluded

To selection

Cloth, Glass, Finished, For Resin Laminates

Standard [CURRENT] 2022-10-04

SAE AMS-C-9084:2022-10-04

Cloth, Glass, Finished, For Resin Laminates

This specification covers woven glass cloth that has been suitably finished for further fabrication into glass fabric base resin laminates and sandwich materials.

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Carbon Removing Compound (For Use in Agitated Tank)

Standard [CURRENT] 2021-05-21

SAE AMS-C-19853A:2021-05-21

Carbon Removing Compound (For Use in Agitated Tank)

This specification covers requirements for the acquisition of two types and two classes of material that will remove or loosen carbon from components of internal combustion engines and compressor ...

131.80 EUR VAT included

123.18 EUR VAT excluded

To selection

Cleaning Compound, High Pressure Cleaner, Liquid

Standard [CURRENT] 2012-07-09

SAE AMS-C-22542A:2012-07-09

Cleaning Compound, High Pressure Cleaner, Liquid

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

134.20 EUR VAT included

125.42 EUR VAT excluded

To selection

Standard [CURRENT] 2013-06-01

SAE AMS-C-26074D:2013-06-01

Electroless Nickel Coatings

This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel-phosphorous alloy coatings on metal and composite surfaces.

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Coating, Corrosion-Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C)

Standard [CURRENT] 2025-07-01

SAE AMS-C-27725E:2025-07-01

Coating, Corrosion-Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C)

This specification establishes requirements for three types of corrosion-preventative coatings for protection of aircraft integral fuel tanks.

135.90 EUR VAT included

127.01 EUR VAT excluded

To selection

Cleaning Compounds, For Parts Washers and Spray Cabinets

Standard [CURRENT] 2012-07-09

SAE AMS-C-29602A:2012-07-09

Cleaning Compounds, For Parts Washers and Spray Cabinets

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

142.20 EUR VAT included

132.90 EUR VAT excluded

To selection

Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)

Standard [CURRENT] 2018-01-18

SAE AMS-C-81562A:2018-01-18

Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)

This specification covers the requirements for three types and three classes of mechanically deposited cadmium, tin-cadmium or zinc coatings on metallic surfaces by impacting (peen plating).

123.60 EUR VAT included

115.51 EUR VAT excluded

To selection

Chemical Milling of Metals, Specification For

Standard [CURRENT] 2015-01-05

SAE AMS-C-81769A:2015-01-05

Chemical Milling of Metals, Specification For

This specification covers the requirements for surface metal removal of ferrous and non-ferrous metals by milling processes using controlled immersion of parts in chemical etching solutions.

144.60 EUR VAT included

135.14 EUR VAT excluded

To selection

Core Material, Plastic Honeycomb, Nylon Paper Base for Aircraft Structural Applications

Standard [CURRENT] 2022-08-10

SAE AMS-C-81986:2022-08-10

Core Material, Plastic Honeycomb, Nylon Paper Base for Aircraft Structural Applications

This specification covers the requirements for nonperforated nylon paper base plastic honeycomb core material for aircraft structural applications, including exterior parts such as radio and radar ...

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts

Standard [CURRENT] 2001-03-09

SAE AMS-C-83231A:2001-03-09

Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts

This specification covers the requirements for two classes and two types of rain erosion resistant coatings. This specification has been prepared as a direct replacement for the Military ...

149.30 EUR VAT included

139.53 EUR VAT excluded

To selection

Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective

Standard [CURRENT] 2001-03-09

SAE AMS-C-83445A:2001-03-09

Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective

This specification covers the requirements for one type of thermally reflective non-yellowing white rain erosion resistant polyurethane coating system. This specification has been prepared as a ...

134.20 EUR VAT included

125.42 EUR VAT excluded

To selection

Standard [CURRENT] 2018-01-02

SAE AMS-DTL-22499/1B:2018-01-02

SHIM STOCK, LAMINATED, ALUMINUM ALLOY

66.50 EUR VAT included

62.15 EUR VAT excluded

To selection

Standard [CURRENT] 2017-01-05

SAE AMS-DTL-22499/2B:2017-01-05

SHIM STOCK, LAMINATED, BRASS

66.50 EUR VAT included

62.15 EUR VAT excluded

To selection

Standard [CURRENT] 2018-05-16

SAE AMS-DTL-22499/3B:2018-05-16

Shim Stock, Laminated, Cres

66.50 EUR VAT included

62.15 EUR VAT excluded

To selection

Standard [CURRENT] 2018-05-07

SAE AMS-DTL-22499B:2018-05-07

Shim Stock, Laminated

This specification covers the requirements for surface bonded laminated shim stock.

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Forging, Steel, For Aircraft/Aerospace Equipment and Special Ordnance Applications

Standard [CURRENT] 2016-08-08

SAE AMS-F-7190B:2016-08-08

Forging, Steel, For Aircraft/Aerospace Equipment and Special Ordnance Applications

106.20 EUR VAT included

99.25 EUR VAT excluded

To selection

Standard [CURRENT] 2016-06-29

SAE AMS-F-24610A:2016-06-29

Fixant, Hold Down

123.60 EUR VAT included

115.51 EUR VAT excluded

To selection

Standard [CURRENT] 2023-05-22

SAE AMS-G-952C:2023-05-22

Guns, Spray, Oil and Solvent

This specification covers hand and air operated, solvent and oil spray guns.

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Standard [CURRENT] 2012-08-10

SAE AMS-G-4343A:2012-08-10

Grease, Pneumatic System

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

106.20 EUR VAT included

99.25 EUR VAT excluded

To selection

Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

Standard [CURRENT] 2012-08-10

SAE AMS-G-6032A:2012-08-10

Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Standard [CURRENT] 2016-06-29

SAE AMS-G-25667A:2016-06-29

Glass, Monolithic, Aircraft Glazing

120.10 EUR VAT included

112.24 EUR VAT excluded

To selection

Standard [CURRENT] 2016-06-29

SAE AMS-G-25871A:2016-06-29

Glass, Laminated, Aircraft Glazing

129.50 EUR VAT included

121.03 EUR VAT excluded

To selection

Grease, Aircraft, High Load Capacity, Wide Temperature Range

Standard [CURRENT] 2012-02-03

SAE AMS-G-81827A:2012-02-03

Grease, Aircraft, High Load Capacity, Wide Temperature Range

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

120.10 EUR VAT included

112.24 EUR VAT excluded

To selection

Standard [CURRENT] 2012-08-10

SAE AMS-G-81937A:2012-08-10

Grease, Instrument, Ultra-Clean, Metric

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Standard [CURRENT] 2020-09-01

SAE AMS-H-6875C:2020-09-01

Heat Treatment of Steel Raw Materials

This specification covers the requirements for heat-treatment of four classes of steel (See 1.2) and the requirements for furnace equipment, test procedures and information for heat-treating ...

140.00 EUR VAT included

130.84 EUR VAT excluded

To selection

Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)

Standard [CURRENT] 2013-04-19

SAE AMS-H-7199A:2013-04-19

Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Heat Treatment of Titanium and Titanium Alloys

Standard [CURRENT] 2014-07-23

SAE AMS-H-81200D:2014-07-23

Heat Treatment of Titanium and Titanium Alloys

This specification covers the heat treatment of titanium and titanium alloy mill products (raw material), including wrought and cast products, by material producers. This specification also covers ...

142.20 EUR VAT included

132.90 EUR VAT excluded

To selection

Standard [CURRENT] 2023-05-22

SAE AMS-H-81829B:2023-05-22

Heat Transfer Fluid, Fluorochemical

This specification covers inert, fluorochemical, liquid heat transfer agents.

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Standard [CURRENT] 2014-05-27

SAE AMS-HH-G-101A:2014-05-27

Gasket, Metallic-Encased

This specification covers metallic-encased gaskets with and without inlays.

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Insulating Compound, Electrical, Ceramic, Class L

Standard [CURRENT] 2016-06-29

SAE AMS-I-10A:2016-06-29

Insulating Compound, Electrical, Ceramic, Class L

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection

Standard [CURRENT] 2016-07-06

SAE AMS-I-538A:2016-07-06

Insulation, Electrical, Pasted-Mica

134.20 EUR VAT included

125.42 EUR VAT excluded

To selection

Standard [CURRENT] 2011-09-23

SAE AMS-I-7171A:2011-09-23

Insulation Blanket, Thermal-Acoustical

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Insulation Sleeving, Electrical, Flexible

Standard [CURRENT] 2013-06-05

SAE AMS-I-7444A:2013-06-05

Insulation Sleeving, Electrical, Flexible

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Iron-Nickel Alloys for Sealing to Glasses and Ceramic

Standard [CURRENT] 2017-04-07

SAE AMS-I-23011C:2017-04-07

Iron-Nickel Alloys for Sealing to Glasses and Ceramic

This specification covers a series of iron-nickel, iron-nickel-cobalt, and iron-nickel-chromium alloys used for sealing to glasses and ceramics in electronic applications (see 6.1).

134.20 EUR VAT included

125.42 EUR VAT excluded

To selection

Standard [CURRENT] 2016-01-06

SAE AMS-I-83387B:2016-01-06

Inspection Process, Magnetic Rubber

This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures ...

140.00 EUR VAT included

130.84 EUR VAT excluded

To selection

Standard [CURRENT] 2017-04-05

SAE AMS-L-18331B:2017-04-05

Lead Alloy Pig

This specification covers pigs of one type of lead alloy used in the making of forming dies.

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplicaton)

Standard [CURRENT] 2011-08-25

SAE AMS-LP-391A:2011-08-25

Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplicaton)

This specification covers methacrylate sheets, rods and tubes produced by casting or machining cast blanks. This specification does not apply to heat- formed and molded or extruded shapes, or ...

146.90 EUR VAT included

137.29 EUR VAT excluded

To selection

Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on

Standard [CURRENT] 2022-09-14

SAE AMS-M-3171A:2022-09-14

Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on

This specification covers general requirements for the apparatus, material, and procedures to be used in the processing of magnesium base alloys for the purpose of increasing their corrosion ...

159.80 EUR VAT included

149.35 EUR VAT excluded

To selection

Molybdenum Disulfide, Technical, Lubrication Grade

Standard [CURRENT] 2017-09-22

SAE AMS-M-7866B:2017-09-22

Molybdenum Disulfide, Technical, Lubrication Grade

This specification covers the requirements for procurement of one grade of powdered molybendum disulfide to be used in lubricants and greases for surfaces where boundary conditions exist.

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Standard [CURRENT] 2017-09-20

SAE AMS-M-45202B:2017-09-20

Magnesium Alloys, Anodic Treatment of

This specification covers the requirements for equipment, materials and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion ...

151.60 EUR VAT included

141.68 EUR VAT excluded

To selection

Rubber: Acrylonitrile-Butadiene (NBR) Fuel-Resistant 60 - 70 Type A Hardness

Standard [CURRENT] 2022-08-05

SAE AMS-P-5315C:2022-08-05

Rubber: Acrylonitrile-Butadiene (NBR) Fuel-Resistant 60 - 70 Type A Hardness

This specification covers an acrylonitrile-butadiene (NBR) rubber in the form of molded rings, molded compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and ...

106.20 EUR VAT included

99.25 EUR VAT excluded

To selection

O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F)

Standard [CURRENT] 2023-04-12

SAE AMS-P-5510B:2023-04-12

O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F)

This specification covers requirements for the material, design, testing and packaging of straight thread tube fitting boss O-rings. O-rings covered by this specification are ...

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Paint System, Fluorescent, Removable, for Aircraft Application

Standard [CURRENT] 2019-10-28

SAE AMS-P-21600B:2019-10-28

Paint System, Fluorescent, Removable, for Aircraft Application

This specification covers the requirements for a high visibility, durable, exterior fluorescent paint system consisting of a pigmented fluorescent paint with a clear protective overcoating ...

129.50 EUR VAT included

121.03 EUR VAT excluded

To selection

Standard [CURRENT] 2016-10-13

SAE AMS-P-21922A:2016-10-13

Plastic Rods and Tubes, Polyethylene

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Standard [CURRENT] 2016-07-06

SAE AMS-P-22968A:2016-07-06

Paper, Recording, Heat Sensitive

117.80 EUR VAT included

110.09 EUR VAT excluded

To selection

Polyimide Retainer Material, Porous Non-Metallic

Standard [CURRENT] 2016-06-09

SAE AMS-P-29609A:2016-06-09

Polyimide Retainer Material, Porous Non-Metallic

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection

Primer Coating, Inorganic, Zinc Dust Pigmented, Self-Curing, For Steel Surfaces

Standard [CURRENT] 2013-07-22

SAE AMS-P-38336A:2013-07-22

Primer Coating, Inorganic, Zinc Dust Pigmented, Self-Curing, For Steel Surfaces

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical ...

120.10 EUR VAT included

112.24 EUR VAT excluded

To selection

Standard [CURRENT] 2015-04-13

SAE AMS-P-46144A:2015-04-13

Plastic Sheet, Polycarbonate

This specification covers polycarbonate sheet.

126.00 EUR VAT included

117.76 EUR VAT excluded

To selection

Standard [CURRENT] 2023-05-24

SAE AMS-P-81728C:2023-05-24

Plating, Tin-Lead (Electrodeposited)

This specification covers the requirements for electrodeposited tin-lead plating intended for use as a coating for corrosion protection and as a base for soldering.

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Plastic Sheet, Polycarbonate, Transparent

Standard [CURRENT] 2016-07-12

SAE AMS-P-83310A:2016-07-12

Plastic Sheet, Polycarbonate, Transparent

123.60 EUR VAT included

115.51 EUR VAT excluded

To selection

Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at 275°F (135°C)

Standard [CURRENT] 1998-04-01

SAE AMS-P-83461:1998-04-01

Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at 275°F (135°C)

This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature rang eof -65 degrees to 275 degrees F (-54 ...

123.60 EUR VAT included

115.51 EUR VAT excluded

To selection

Standard [CURRENT] 2016-09-01

SAE AMS-PRF-46194B:2016-09-01

Foam, Rigid, Structural, Closed Cell

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2014-03-04

SAE AMS-QQ-A-200/2B:2014-03-04

Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 2014 bar, rod, shapes, tube, and wire produced by extrusion.

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2019-11-19

SAE AMS-QQ-A-200/3A:2019-11-19

Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 2024 bar, rod, shapes, tube, and wire produced by extrusion.

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2017-11-20

SAE AMS-QQ-A-200/4C:2017-11-20

Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2018-01-18

SAE AMS-QQ-A-200/5B:2018-01-18

Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 5086 bar, rod, shapes, tube, and wire produced by extrusion.

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2017-12-07

SAE AMS-QQ-A-200/6C:2017-12-07

Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2017-12-07

SAE AMS-QQ-A-200/7C:2017-12-07

Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded

73.50 EUR VAT included

68.69 EUR VAT excluded

To selection

Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2015-05-06

SAE AMS-QQ-A-200/8A:2015-05-06

Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 6061 bar, rod, shapes, tube, and wire produced by extrusion.

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2014-10-13

SAE AMS-QQ-A-200/11A:2014-10-13

Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 7075 bar, rod, shapes, tube, and wire produced by extrusion. AMS-QQ-A-200/11A has been declared "STABILIZED" by AMS Committee D.

96.80 EUR VAT included

90.47 EUR VAT excluded

To selection

Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, and Wire, Extruded

Standard [CURRENT] 2018-01-04

SAE AMS-QQ-A-200/13C:2018-01-04

Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, and Wire, Extruded

This specification covers the specific requirements for aluminum alloy 7178 bar, rod, shapes, tube, and wire produced by extrusion.

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76, Improved Exfoliation Resistance

Standard [CURRENT] 2018-01-04

SAE AMS-QQ-A-200/14B:2018-01-04

Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76, Improved Exfoliation Resistance

This specification covers the specific requirements for aluminum alloy 7178-T76 bar, rod, shapes, and wire produced by extrusion.

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Aluminum Alloy Bar, Rod, and Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance

Standard [CURRENT] 2013-07-31

SAE AMS-QQ-A-200/15B:2013-07-31

Aluminum Alloy Bar, Rod, and Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance

AMS-QQ-A-200/15B stabilizes this document because equivalent technical requirements are contained in AMS4317. AMS-QQ-A-200/15B has been declared "STABILIZED" by AMS Committee D and will no longer ...

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for

Standard [CURRENT] 2019-11-19

SAE AMS-QQ-A-200C:2019-11-19

Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for

This specification covers the general requirements for aluminum alloy bar, rod, shapes, structural shapes, tube, and wire extruded. Specific requirements for these products in a particular alloy ...

109.70 EUR VAT included

102.52 EUR VAT excluded

To selection

Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished

Standard [CURRENT] 2017-02-17

SAE AMS-QQ-A-225/4A:2017-02-17

Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished

Standard [CURRENT] 2018-11-06

SAE AMS-QQ-A-225/5A:2018-11-06

Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished

This specification covers the specific requirements for 2017 aluminum alloy bar, rod and wire produced by rolling, drawing or cold finishing.

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished

Standard [CURRENT] 2018-03-04

SAE AMS-QQ-A-225/6B:2018-03-04

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished

This specification covers the specific requirements for 2024 aluminum alloy bar, rod and wire produced by rolling, drawing or cold finishing.

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished

Standard [CURRENT] 2014-07-25

SAE AMS-QQ-A-225/9A:2014-07-25

Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished

This specification covers the specific requirements for 7075 aluminum alloy bar, rod, wire, and special shapes produced by rolling, drawing, or cold finishing.

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For

Standard [CURRENT] 2018-01-04

SAE AMS-QQ-A-225C:2018-01-04

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For

This specification covers the general requirements for aluminum and aluminum alloy bar, rod, wire, or special shapes; rolled, drawn, or cold finished. Specific requirements for these products are ...

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection

Aluminum Alloy Alclad 2014, Plate and Sheet

Standard [CURRENT] 2014-03-06

SAE AMS-QQ-A-250/3A:2014-03-06

Aluminum Alloy Alclad 2014, Plate and Sheet

This specification covers the specific requirements for 2014 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this ...

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Standard [CURRENT] 2015-02-05

SAE AMS-QQ-A-250/4B:2015-02-05

Aluminum Alloy 2024, Plate and Sheet

This specification covers the specific requirements for 2024 aluminum alloy plate and sheet; the general requirements are covered in AMS-QQ-A-250.

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Aluminum Alloy Alclad 2024, Plate and Sheet

Standard [CURRENT] 2021-05-28

SAE AMS-QQ-A-250/5C:2021-05-28

Aluminum Alloy Alclad 2024, Plate and Sheet

This specification covers the specific requirements for 2024 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this ...

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Standard [CURRENT] 2014-01-10

SAE AMS-QQ-A-250/8C:2014-01-10

Aluminum Alloy 5052, Plate and Sheet

This specification covers the specific requirements for 5052 aluminum alloy plate and sheet; the general requirements are covered in AMS-QQ-A-250.

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Standard [CURRENT] 2013-12-12

SAE AMS-QQ-A-250/10C:2013-12-12

Aluminum Alloy 5454, Plate and Sheet

This specification covers the specific requirements for 5454 aluminum alloy plate and sheet; the general requirements are covered in AMS-QQ-A-250.

73.50 EUR VAT included

68.69 EUR VAT excluded

To selection

Standard [CURRENT] 2013-12-12

SAE AMS-QQ-A-250/12A:2013-12-12

Aluminum Alloy 7075, Plate and Sheet

This specification covers the specific requirements for 7075 aluminum alloy plate and sheet.

107.30 EUR VAT included

100.28 EUR VAT excluded

To selection

Aluminum Alloy Alclad 7075, Plate and Sheet

Standard [CURRENT] 2021-05-21

SAE AMS-QQ-A-250/13B:2021-05-21

Aluminum Alloy Alclad 7075, Plate and Sheet

This specification covers the specific requirements for 7075 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this ...

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Standard [CURRENT] 2014-02-14

SAE AMS-QQ-A-250/14B:2014-02-14

Aluminum Alloy 7178, Plate and Sheet

This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.

80.40 EUR VAT included

75.14 EUR VAT excluded

To selection

Aluminum Alloy Alclad 7178, Plate and Sheet

Standard [CURRENT] 2014-02-14

SAE AMS-QQ-A-250/15C:2014-02-14

Aluminum Alloy Alclad 7178, Plate and Sheet

This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this ...

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Aluminum 7075, Plate and Sheet, Alclad One Side

Standard [CURRENT] 2014-03-06

SAE AMS-QQ-A-250/18B:2014-03-06

Aluminum 7075, Plate and Sheet, Alclad One Side

This specification covers the specific requirements for 7075 aluminum alloy alclad one side plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by ...

92.10 EUR VAT included

86.07 EUR VAT excluded

To selection

Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant

Standard [CURRENT] 2014-02-14

SAE AMS-QQ-A-250/21C:2014-02-14

Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant

This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant

Standard [CURRENT] 2014-02-14

SAE AMS-QQ-A-250/22C:2014-02-14

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant

This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651plate. The general requirements are covered in AMS-QQ-A-250.

101.50 EUR VAT included

94.86 EUR VAT excluded

To selection

Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)

Standard [CURRENT] 2021-05-21

SAE AMS-QQ-A-250/24C:2021-05-21

Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)

This specification covers the specific requirements for aluminum alloy 7075 plate and sheet for applications requiring improved exfoliation resistance.

96.80 EUR VAT included

90.47 EUR VAT excluded

To selection

Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet

Standard [CURRENT] 2014-02-14

SAE AMS-QQ-A-250/28C:2014-02-14

Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet

This specification covers the specific requirements for 7178 aluminum alloy, 7011 alclad, plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this ...

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection

Standard [CURRENT] 2013-12-12

SAE AMS-QQ-A-250/29A:2013-12-12

Aluminum Alloy 2124, Plate

This specification covers the specific requirements for 2124 aluminum alloy plate for intended use in the -T851 temper; the general requirements are covered in AMS-QQ-A-250.

86.30 EUR VAT included

80.65 EUR VAT excluded

To selection

Standard [CURRENT] 2013-12-12

SAE AMS-QQ-A-250/30A:2013-12-12

Aluminum Alloy 2219, Plate and Sheet

This specification covers the specific requirements for 2219 aluminum alloy plate and sheet.

96.80 EUR VAT included

90.47 EUR VAT excluded

To selection

Aluminum and Aluminum Alloy, Plate and Sheet General Specification for

Standard [CURRENT] 2018-06-12

SAE AMS-QQ-A-250B:2018-06-12

Aluminum and Aluminum Alloy, Plate and Sheet General Specification for

This specification covers the general requirements for aluminum and aluminum alloy plate and sheet. Specific requirements for plate and sheet of a particular alloy are covered by the applicable ...

106.20 EUR VAT included

99.25 EUR VAT excluded

To selection

Standard [CURRENT] 2018-03-14

SAE AMS-QQ-A-367E:2018-03-14

Aluminum Alloy Forgings

This specification covers aluminum alloy die forgings and hand forgings.

136.50 EUR VAT included

127.57 EUR VAT excluded

To selection

Standard [CURRENT] 2014-11-07

SAE AMS-QQ-A-591B:2014-11-07

Aluminum Alloy Die Castings

This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of August 2009. It is recommended, therefore, that this specification not be specified for new designs.

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection

Standard [CURRENT] 2021-10-12

SAE AMS-QQ-N-290D:2021-10-12

Nickel Plating (Electrodeposited)

These products have been used typically for electrodeposited nickel plating on steel, copper and copper alloys, and zinc and zinc alloys, but usage is not limited to such applications.

114.30 EUR VAT included

106.82 EUR VAT excluded

To selection