Produktsuche

Products for „..."

591,558 search results

Standard [CURRENT] 1956-02

DIN 6889:1956-02

Taper Key Torque Transmission; Gib-head Saddle Keys, Dimensions and Application

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1965-01

DIN 7270:1965-01

Screw caps for oil containers

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1962-01

DIN 7333:1962-01

Eyeletts for cardboard labels

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1971-07

DIN 7404:1971-07

Safetypins

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1967-09

DIN 7417:1967-09

Square socket keys

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1991-09

DIN 16181:1991-09

Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1991-09

DIN 16182:1991-09

Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1991-09

DIN 16185:1991-09

Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1991-09

DIN 16186:1991-09

Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2000-03

DIN 74087:2000-03

Road vehicles - Stabilizing devices for central-axle trailers - Requirements on effectiveness

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-04

DIN 71802:1992-04

Ball joints with or without circlips

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-04

DIN 75553:1992-04

Pressure sensor

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-04

DIN 75554:1992-04

Pressure gauges

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1990-11

DIN 10463:1990-11

Determination of non-fat solids content of butter; routine method

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1990-12

DIN 10324:1990-12

Determination of the total phosphorus content of cheese and processed cheese; spectrometric method

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1990-12

DIN 763:1990-12

Tested, non-calibrated, long-link round steel chains

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1990-12

DIN 65570:1990-12

Aerospace; heat treatment facilities; general requirements

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 1990-12

DIN 65582:1990-12

Aerospace; heat treatment of aluminium- and magnesium-alloy castings

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 29657:1991-01

Aerospace; seamless structural tubes in steel and nickel alloys; technical specification

This document has been corrected by

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 40738:1991-01

Lead storage batteries; stationary cells with positive plante plates, narrow plate distance; rated capacities, main dimensions

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2012-11

DIN 20166:2012-11

Blasting supplies - Intrinsically safe detonating cords (permitted detonating cords) - Safety requirements and testing

Blasting is the forcible and sudden rupturing as well as division of blasting objects by the energy generated during the conversion of an explosive charge. In mining, the blasting objects mainly ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2012-12

DIN 25429:2012-12

Test method for hot cell shielding with gamma point sources

The standard shall be applied for testing all hot cell shielding and similar spaces shielded against gamma radiation in which handling of virtual gamma point sources is intended; shielding and ...

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 9680:1991-01

Agricultural tractors and machinery; electric power transmission; dimensions, requirements

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 19053:1991-01

Microfilm aperture card for film 35 mm

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 65174:1991-01

Aerospace; round bars of titanium and titanium alloys; dimensions, masses

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 43790:1991-01

Basic principles for the design of line scales and pointers

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 1991-01

DIN 65471:1991-01

Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2013-01

DIN 81709:2013-01

End plugs for tubes at guard rails

The end plugs described in this standard are pressed as ends into the guard rail tubes on vessels to avoid injuries and to prevent penetration by moisture. The dimensions and material of these ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1991-03

DIN 11740:1991-03

Agricultural tractors and machinery; track widths for trailers

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1991-03

DIN 11741:1991-03

Agricultural tractors and machinery; trailer dimensions; towing device, coupling, transport volume

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1991-03

DIN 45631:1991-03

Procedure for calculating loudness level and loudness

This document has been modified by: DIN 45631/A1:2010-03

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 1991-03

DIN 64905:1991-03

Cylindrical tubes for textile fabrics

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1996-03

DIN 10331:1996-03

Determination of the hardness of butter

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1996-04

DIN 32891:1996-04

Round steel link chains - Grade 2, non-calibrated, tested

This document has been corrected by

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1996-04

DIN 95366:1996-04

Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2017-07

DIN 16002:2017-07

Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing

DIN 16002 specifies the requirements for indicating pressure gauges with Bourdon tubes, diaphragm springs, bellows springs and capsule springs for measuring absolute pressure, whereby other ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 1996-04

DIN 74086:1996-04

Road vehicles - Static load for trailers in operation

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2017-07

DIN 16500:2017-07

Printing technology - Basic terms

This standard defines basic terms in printing technology. It is intended to standardize the technical language within the defined framework in order to ensure the unambiguous use of technical ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2017-07

DIN 16609:2017-07

Printing technology - Porous printing - Terms

This standard defines terms for porous printing. It is intended to standardize the technical language within the defined framework in order to ensure the unambiguous use of technical terms in ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2017-07

DIN 51032:2017-07

Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food

This standard specifies maximum values for the release of lead and cadmium during cold extraction in accordance with DIN EN 1388-1 and DIN EN 1388-2 for consumer goods made of ceramic material ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2017-08

DIN 26054:2017-08

Non-metallic corrugated hose assemblies for chemical products

This standard applies to the design, manufacture, testing and monitoring of hose assemblies with corrugated hoses made of non-metallic materials, at least regenerate-free, hose grade quality PTFE ...

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2015-11

DIN 54373:2015-11

Testing of paper, board and pulps - Determination of acid insoluble proportion of ignition residue

This document lays down a method for the determination of the hydrochloric acid-insoluble proportion in the ignition residue of all types of pulp, filler-free paper and board. This document was ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2015-11

DIN 54383:2015-11

Testing of paper and board - Determination of spores of clostridium

This standard establishes a method for the determination of clostridia in paper, board, solid board and corrugated board. The scope covers the use of these materials as food packaging materials ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2015-10

DIN 75012:2015-10

Road tankers - Dipstick assembly - Mating dimensions

This standard contains the mating dimensions of the dipstick assembly for mineral oil road tankers and the associated flange gasket. The dipstick assembly is used to determine the filling level of ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2015-12

DIN 75013:2015-12

Tank trucks - Grounding plate - Dimensions

This standard contains the dimensions for grounding plates with mandrel for earthing mineral oil road vehicles. This standard has been prepared by Working Committee NA 104-02-07 AA "Ausrüstung für ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2015-12

DIN 65342:2015-12

Aerospace series - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English

This standard specifies the characteristics of anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel used together with screws and bolts of 1 100 ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 352:2016-01

Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68

This standard applies to sets of 3 taps consisting of a first taper tap (V), second tap (M) and bottoming tap (F), and to short machine screwing taps intended for the production of coarse pitch ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-02

DIN 357:2016-02

Machine nut taps for coarse pitch metric ISO-threads M3 to M68

This standard applies to machine nut taps intended for the production of nuts with coarse pitch metric ISO-threads according to DIN 13-1. The standard has been prepared in Working Committee NA ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 371:2016-01

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25

This standard applies to machine screwing taps with reinforced shank intended for the production of coarse pitch metric ISO-threads according to DIN 13-1 and fine pitch metric ISO-threads ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 374:2016-01

Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4

This standard applies to machine screwing taps with stepped shank (overflow taps), which are intended for the production of fine pitch metric ISO-threads according to DIN 13-2 to DIN 13-9. The ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page