Produktsuche

Products for „..."

591,558 search results

Standard [CURRENT] 2016-02

DIN 376:2016-02

Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68

This standard applies to machine screwing taps with reinforced shank intended for the production of coarse pitch metric ISO-threads according to DIN 13-1. The standard has been prepared in Working ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2015-09

DIN 89285:2015-09

Glands for electrical cables and wires - Cable gland with degree of protection IP66 and IP68 for use on vessels; Text in German and English

Cable glands according to this standard are used if, in addition to heavy mechanical loads, flooding (IPX8) or strong water jets (IPX6) are to be expected at the installation location. This is to ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2015-08

DIN 50933:2015-08

Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument

This standard specifies how the thickness of coatings on base materials on a reference surface is measured using a probe. The method according to this standard can be used for all material ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2015-09

DIN 58908:2015-09

Haemostaseology - Determination of activated partial thromboplastin time (APTT) - Reference measurement procedure; Text in German and English

This standard is applicable to the determination of the activated partial thromboplastin time (APTT) in plasma obtained from citrated venous blood. The activated partial thromboplastin time is ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2001-07

DIN 58764:2001-07

Production in optical engineering - Connecting dimensions for means of transport and handling systems

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2001-10

DIN 12672:2001-10

Laboratory glass or plastics ware - Imhoff sedimentation cones

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2002-04

DIN 52913:2002-04

Testing of static gaskets for flange connections - Compression creep testing of gaskets made from sheets

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2001-09

DIN 10466:2001-09

Determination of whey protein content in total protein of milk and milk products - Polarographic method

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2001-07

DIN 2207:2001-07

Tool shanks for milling spindle noses according to DIN 2201 - Mating dimensions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2002-02

DIN 12693:2002-02

Plastics laboratory ware - Disposable micropipettes adjusted on "In"

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2002-02

DIN 86018:2002-02

Welded tubes made of CuNi10Fe1,6Mn for pipes - Dimensions

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2001-12

DIN 10236:2001-12

Analysis of spices and condiments - Determination of loss in mass of capsicum and allium species and of dried vegetables by vacuum oven drying

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2005-11

DIN 65281:2005-11

Aerospace series - Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2011-03

DIN 65307:2011-03

Aerospace series - Inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel; Text in German and English

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2005-09

DIN 65344:2005-09

Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2006-11

DIN 65346:2006-11

Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C

This document has been corrected by

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2002-01

DIN 6527:2002-01

Solid hardmetal end mills with stepped parallel shank - Dimensions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2002-01

DIN 6528:2002-01

Solid hardmetal end mills with continuous parallel shank - Dimensions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2006-11

DIN 65239:2006-11

Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2002-01

DIN 30643:2002-01

Signs, plates and labels - Resistance to wiping and wear of lettering - Requirements and testing

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2002-05

DIN 10760:2002-05

Analysis of honey - Determination of the relative frequency of pollen

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2002-07

DIN 86021:2002-07

Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2002-06

DIN 2875:2002-06

Flanged steel pipes and fittings with hard or soft rubber linings - Technical delivery conditions

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2002-06

DIN 2874:2002-06

Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2002-06

DIN 2873:2002-06

Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 2002-06

DIN 2848:2002-06

Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded
To selection
Standard [CURRENT] 2002-08

DIN 58930:2002-08

Haemostaseology - INR calibration plasmas - Requirements, preparation and use

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1970-12

DIN 7355:1970-12

Serial lifting equipment, jacks

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1971-03

DIN 8297:1971-03

Winding buttons for wrist-watches

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1977-01

DIN 7809:1977-01

Tyres for handcarts

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1976-06

DIN 8605:1976-06

Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1976-06

DIN 8606:1976-06

Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1976-06

DIN 8607:1976-06

Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1976-06

DIN 10329:1976-06

Determination of fat content of cream; weighing method according to Roeder

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1970-09

DIN 5491:1970-09

Mass transfer (diffusion and transport of matter); basic concepts, quantities, symbols, dimensionless parameters

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1963-08

DIN 5280:1963-08

Ball chains

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1972-04

DIN 5287:1972-04

Simplex hook spring hooks made of one piece

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1966-02

DIN 5291:1966-02

Roller Buckles

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1966-02

DIN 5292:1966-02

Strap buckles

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1972-11

DIN 5293:1972-11

Eyes for straps and belts

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1972-08

DIN 5294:1972-08

Studs for screwing in and riveting on

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1972-08

DIN 5295:1972-08

Clamping plates for straps and belts

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1966-02

DIN 6406:1966-02

Loops

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1966-08

DIN 6445:1966-08

Wood bits; gimlets with ring handles

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1971-08

DIN 8530:1971-08

Pneumatic tools, shanks and bushings for riveting and chipping hammers

from 25.80 EUR VAT included

from 24.11 EUR VAT excluded
To selection
Standard [CURRENT] 1971-08

DIN 8531:1971-08

Pneumatic tools, prepared rivet snaps

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1971-08

DIN 8532:1971-08

Pneumatic tools, shank chisels

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1970-04

DIN 8533:1970-04

Pneumatic tools, rammer butts, cones for piston-rods

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1970-10

DIN 8534:1970-10

Pneumatic tools, sieves, sieve-nipples

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1970-01

DIN 8535:1970-01

Pneumatic tools, screw nozzle tips

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page