Products for „..."

Refine your search

597,674 search results

Sort by:
  • Screws with coarse thread and reduced shank for captive applications

    Standard [CURRENT] 2013-08

    DIN 6929:2013-08

    Screws with coarse thread and reduced shank for captive applications

    This standard contains specifications for screws with threads from M3 to M30 with different head shapes and a shank diameter which is smaller than the core diameter of the thread. The shank style ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Determination of pH of butter plasm

    Standard [CURRENT] 2004-10

    DIN 10349:2004-10

    Determination of pH of butter plasm

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Rapid methods for the dairy laboratory - General basic conditions and requirements for use

    Standard [CURRENT] 2004-10

    DIN 10481:2004-10

    Rapid methods for the dairy laboratory - General basic conditions and requirements for use

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Rope hose holders

    Standard [CURRENT] 2004-10

    DIN 14828:2004-10

    Rope hose holders

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Engineers wrenches single-head - Test torques series C

    Standard [CURRENT] 2007-09

    DIN 3114:2007-09

    Engineers wrenches single-head - Test torques series C

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Cap srews for mounting holes and glands according to DIN 89280; Text in German and English

    Standard [CURRENT] 2007-09

    DIN 89284:2007-09

    Cap srews for mounting holes and glands according to DIN 89280; Text in German and English

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Components for tubular heat exchangers

    Standard [CURRENT] 2007-09

    DIN 28185:2007-09

    Components for tubular heat exchangers

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Steel U-tubes for tubular heat exchangers - Technical delivery conditions

    Standard [CURRENT] 2007-09

    DIN 28179:2007-09

    Steel U-tubes for tubular heat exchangers - Technical delivery conditions

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Box wrenches, double head - Test torques series A

    Standard [CURRENT] 2007-09

    DIN 838:2007-09

    Box wrenches, double head - Test torques series A

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Single-head engineers wrenches for subordinate applications - Dimensions and test torques

    Standard [CURRENT] 2007-09

    DIN 894:2007-09

    Single-head engineers wrenches for subordinate applications - Dimensions and test torques

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Engineers wrenches for subordinate applications - Dimensions and test torques

    Standard [CURRENT] 2007-09

    DIN 895:2007-09

    Engineers wrenches for subordinate applications - Dimensions and test torques

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Tee wrenches, socket single square

    Standard [CURRENT] 2007-09

    DIN 904:2007-09

    Tee wrenches, socket single square

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Engineers wrenches, double head - Test torques series C

    Standard [CURRENT] 2007-09

    DIN 3110:2007-09

    Engineers wrenches, double head - Test torques series C

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Box wrenches, single end - Test torques series A

    Standard [CURRENT] 2007-09

    DIN 3111:2007-09

    Box wrenches, single end - Test torques series A

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Tee wrench socket, single head and tubular single-head - Test torques series A

    Standard [CURRENT] 2007-09

    DIN 3112:2007-09

    Tee wrench socket, single head and tubular single-head - Test torques series A

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Combination wrenches with equal openings - Test torque series A and C

    Standard [CURRENT] 2007-09

    DIN 3113:2007-09

    Combination wrenches with equal openings - Test torque series A and C

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Flare nut wrenches - Test torques series C

    Standard [CURRENT] 2007-09

    DIN 3118:2007-09

    Flare nut wrenches - Test torques series C

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Strips and sheets of wrought nickel and nickel alloys - Properties

    Standard [CURRENT] 2021-05

    DIN 17750:2021-05

    Strips and sheets of wrought nickel and nickel alloys - Properties

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Graphical symbols for textile machinery

    Standard [CURRENT] 2021-07

    DIN 13017:2021-07

    Graphical symbols for textile machinery

    Accessibility

    from 130.90 EUR VAT included

    from 122.34 EUR VAT excluded

    To selection
  • Non-soldering compression couplings - Union nuts for butt joints

    Standard [CURRENT] 2012-02

    DIN 3872:2012-02

    Non-soldering compression couplings - Union nuts for butt joints

    This standard applies for union nuts for butt joints with cutting ring used in air braking systems and other compressed air systems in road vehicles. This standard has been prepared by Working ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Testing of solid fuels - Determination of Hardgrove grindability index of hard coal

    Standard [CURRENT] 2001-07

    DIN 51742:2001-07

    Testing of solid fuels - Determination of Hardgrove grindability index of hard coal

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method

    Standard [CURRENT] 2001-08

    DIN 51721:2001-08

    Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Testing of solid fuels - Determination of the bulk density of solid fuels

    Standard [CURRENT] 2001-06

    DIN 51705:2001-06

    Testing of solid fuels - Determination of the bulk density of solid fuels

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Mine cars - Front wall, casing, frame, buffer sheet

    Standard [CURRENT] 2012-01

    DIN 20551:2012-01

    Mine cars - Front wall, casing, frame, buffer sheet

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars; without springs

    Standard [CURRENT] 2012-01

    DIN 20553:2012-01

    Wheel sets with taper roller bearings for mine cars; without springs

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars, exterior spring suspension

    Standard [CURRENT] 2012-01

    DIN 20555:2012-01

    Wheel sets with taper roller bearings for mine cars, exterior spring suspension

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars, interior spring suspension

    Standard [CURRENT] 2012-01

    DIN 20556:2012-01

    Wheel sets with taper roller bearings for mine cars, interior spring suspension

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

    Standard [CURRENT] 2012-01

    DIN 20586:2012-01

    Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Pit converted timber - Timber sleepers

    Standard [CURRENT] 2012-02

    DIN 21325:2012-02

    Pit converted timber - Timber sleepers

    Sleepers are intended to hold the tracks of the mine cars in their defined position and to transfer the forces of the tracks resulting from the imposed loads onto the track bed. Accordingly, their ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Cape chisels

    Standard [CURRENT] 2012-02

    DIN 6451:2012-02

    Cape chisels

    This standard specifies requirements for cape chisels. In addition to dimensions for various nominal lengths of cape chisels, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Soft-head hammers - Technical specifications

    Standard [CURRENT] 2012-02

    DIN 5136:2012-02

    Soft-head hammers - Technical specifications

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Pin punches

    Standard [CURRENT] 2012-02

    DIN 6450:2012-02

    Pin punches

    This standard specifies requirements for pin punches. In addition to dimensions for various nominal diameters of pin punches, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Flat chisels

    Standard [CURRENT] 2012-02

    DIN 6453:2012-02

    Flat chisels

    This standard specifies requirements for flat chisels. In addition to dimensions for various nominal lengths of flat chisels, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Drift punches

    Standard [CURRENT] 2012-02

    DIN 6458:2012-02

    Drift punches

    This standard specifies requirements for drift punches. In addition to dimensions for various nominal diameters of drift punches, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Mason chisels

    Standard [CURRENT] 2012-02

    DIN 7254:2012-02

    Mason chisels

    This standard specifies requirements for mason chisels. In addition to dimensions for various size classes of mason chisels, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Engineers' cold chisels and allied tools - Technical specifications

    Standard [CURRENT] 2012-02

    DIN 7255:2012-02

    Engineers' cold chisels and allied tools - Technical specifications

    Technical specifications for the manufacture and applicability of engineers' cold chisels and allied tools made of steel, such as chisels, centre punches and pin punches, are specified in this ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Pointed chisels

    Standard [CURRENT] 2012-02

    DIN 7256:2012-02

    Pointed chisels

    This standard specifies requirements for pointed chisels. In addition to dimensions for various size classes of pointed chisels, the DIN standard gives information for the technical delivery ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques

    Standard [CURRENT] 2012-03

    DIN 3129:2012-03

    Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques

    This German standard specifies product requirements for power-driven square drive socket wrenches which are listed in ISO 1703 under reference number 2 2 02 01 0. In addition to the dimensions and ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Terms and definitions used on ageing of materials - Polymeric materials

    Standard [CURRENT] 2012-09

    DIN 50035:2012-09

    Terms and definitions used on ageing of materials - Polymeric materials

    DIN 50035 has been prepared by the Plastics Standards Committee (FNK), Working Committee 054-01-04 AA "Verhalten gegen Umgebungseinflüsse" ("Environmental resistance"). It contains general ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Support rings for carbon and stainless steel agitator vessels - Position

    Standard [CURRENT] 2012-02

    DIN 28160:2012-02

    Support rings for carbon and stainless steel agitator vessels - Position

    This standard applies for the position of support rings for carbon and stainless steel agitator vessels according to DIN 28136-1, form A and form B. The standard has been prepared by Working ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Flat link chains for use in continuous conveyors in mining

    Standard [CURRENT] 2012-05

    DIN 22255:2012-05

    Flat link chains for use in continuous conveyors in mining

    In underground mining, coal occurs during loosening (with shearer loaders, amongst others) as lumpy debris mixed with rock with individual pieces of very different sizes and hardness. For ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Slackline systems - General and safety requirements and test methods

    Standard [CURRENT] 2012-02

    DIN 79400:2012-02

    Slackline systems - General and safety requirements and test methods

    This standard applies to slackline systems installed at jump height. It specifies terms and definitions, safety requirements for the material and all components used, including the mounting, as ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Toothings (Serrations) for surgical instruments - Profile angles, groove distances

    Standard [CURRENT] 2014-02

    DIN 58299:2014-02

    Toothings (Serrations) for surgical instruments - Profile angles, groove distances

    This document contains specifications on toothings (serrations) for surgical instruments intended for holding or clamping, for example, for artery forceps. This document does not relate to ...

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Joints for surgical instruments

    Standard [CURRENT] 2014-02

    DIN 58300:2014-02

    Joints for surgical instruments

    This document specifies joints for surgical instruments and their designations. In standards concerning particular instruments, type and characteristics of the respective joint are specified by ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design

    Standard [CURRENT] 2014-02

    DIN 20317:2014-02

    Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design

    This standard specifies dimensions and designations of round and rope thread connections to be used in percussive drilling technology of larger dimensions in mining which are not included in ISO ...

    Corrected document: Customers who purchased the previous document DIN 20317:2012-11 received free of charge

    Accessibility

    from 26.10 EUR VAT included

    from 24.39 EUR VAT excluded

    To selection
  • Tools for pressing - Guide bushes

    Standard [CURRENT] 2014-03

    DIN 9834:2014-03

    Tools for pressing - Guide bushes

    This standard specifies the dimensions and designation for guide bushes that are fixed with holders according to DIN 9832 and used for guide pillars according to DIN 9833. This standard has been ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

    Standard [CURRENT] 2014-08

    DIN 19742:2014-08

    Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

    Phthalates are mainly used as plasticizers for plastics such as PVC and nitrocellulose. For the evaluation of phthalates, a fundamental distinction is made between low-molecular (for example ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Pressure limitation valve, nominal pressure 16

    Standard [CURRENT] 2014-08

    DIN 14380:2014-08

    Pressure limitation valve, nominal pressure 16

    A pressure limitation device according to this standard is an adjustable fire fighting fitting reducing excessive pressures by draining water in order to prevent excessive strain of pressure hoses.

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Sprayed concrete - National application rules for series DIN EN 14487 and rules for design of sprayed concrete constructions

    Standard [CURRENT] 2014-08

    DIN 18551:2014-08

    Sprayed concrete - National application rules for series DIN EN 14487 and rules for design of sprayed concrete constructions

    This standard applies for sprayed concrete to be used for repair and reinforcement of existing structures, for new structures and for the stabilization of excavation pits, cavities and slopes. It ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Information and documentation - Romanization of Japanese

    Standard [CURRENT] 2014-08

    DIN 32708:2014-08

    Information and documentation - Romanization of Japanese

    This standard specifies the romanization of the Japanese Kana syllabary in Latin letters in accordance with the modified Hepburn-system. This romanization shall be preferred due to its ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page