Produktsuche

Products for „..."

591,560 search results

Standard [CURRENT] 1979-08

DIN 65065:1979-08

Aerospace; resins for fiber reinforced, technical specification

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1976-12

DIN 55480:1976-12

Means of packaging; cans made of aluminium with screw caps, round

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1978-04

DIN 72701:1978-04

Sound signalling devices; acoustic horn bugles for low voltages

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2005-06

DIN 74255:2005-06

Towed Vehicles - Graphical symbols for levers

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2006-01

DIN 65530:2006-01

Aerospace - Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2023-07

DIN 25483:2023-07

Methods of environmental monitoring using integrating solid-state dosimeters

from 173.40 EUR VAT included

from 162.06 EUR VAT excluded
To selection
Standard [CURRENT] 2024-05

DIN 546:2024-05

Slotted round nuts

This document specifies the properties of slotted round nuts (M1 to M20). This document has been prepared by Working Committee NA 067-00-08 AA "Verbindungselemente mit Sonderformen und aus ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2024-05

DIN 547:2024-05

Round nuts with drilled holes in one face

This document specifies the properties of round nuts with drilled holes in one face for thread sizes M2 to M10. Round nuts with drilled holes in one face are usually lathe parts made of steel ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2024-05

DIN 548:2024-05

Round nuts with set pin holes in side

This document specifies the properties of round nuts with set pin holes in their side for thread sizes M2 to M10. Round nuts with set pin holes in their side are usually lathe parts made of steel ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1982-11

DIN 30650:1982-11

Odorant storage and transportation containers

This document has been corrected by

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1976-09

DIN 52182:1976-09

Testing of wood; determination of density

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1976-09

DIN 52185:1976-09

Testing of wood; compression test parallel to grain

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1978-06

DIN 52186:1978-06

Testing of wood; bending test

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1979-05

DIN 52184:1979-05

Testing of wood; determination of swelling and shrinkage

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1979-05

DIN 52187:1979-05

Testing of wood; determination of ultimate shearing stress parallel to grain

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1979-05

DIN 52188:1979-05

Testing of wood; determination of ultimate tensile stress parallel to grain

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 1979-05

DIN 52192:1979-05

Testing of wood; compression test perpendicular to grain

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 525:2025-09

Studs for welding

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 921:2025-09

Slotted pan head screws with large head

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 12876:2025-09

Electrical laboratory devices - Laboratory circulators and baths

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 10186:2025-09

Microbiological analysis of milk - Enumeration of yeasts and moulds - Reference method

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 55403:2025-09

Packaging test - Test method for packaging films - Determination of the tendency to curl

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 7965:2025-09

Screwed inserts (Screw plugs)

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2025-09

DIN 51933:2025-09

Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2021-06

DIN 6815:2021-06

Medical X-ray equipment up to 300 kV - Rules for testing of radiation protection after installation, maintenance and essential modification

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2006-12

DIN 6850:2006-12

Radiation protection containers, tables and safes for use in nuclear medicine - Requirements and classification

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2016-11

DIN 6843:2016-11

Radiation protection rules for handling of unsealed radioactive material in medicine

This standard applies to the use of open radioactive substances in medicine. It specifies rules for handling open radioactive substances in medicine. The standard contains safety-related ...

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded
To selection
Standard [CURRENT] 1996-01

DIN 6860:1996-01

Film processing in radiology - Storage, transport, handling and processing

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2016-06

DIN 68330:2016-06

Veneers - Terms and definitions

This standard defines designations for veneers. Compared to DIN 68330:1976-08, the English and French titles have been updated, terms from DIN EN 313-2 have been taken into account and the layout ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2016-06

DIN 4079:2016-06

Veneers - Thicknesses

This standard specifies the commercial nominal thicknesses of face veneers. The standard does not apply to sawn veneers. Compared to DIN 4079:1976-05, European standards for the determination of ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-07

DIN 52376:2016-07

Testing of plywood - Determination of compression strength parallel to the surfaces

This standard specifies a method for determining the compressive strength of plywood parallel to the surfaces. The method is suitable for plywood from 7 mm thickness. Most test methods for ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-07

DIN 52377:2016-07

Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength

This standard specifies a method for determining the modulus of elasticity in tension and of tensile strength of plywood parallel to the surfaces. Most test methods for wood-based panels are ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2017-05

DIN 52367:2017-05

Wood-based panels - Determination of shear strength parallel to the surface

This standard specifies a method for determining the shear strength of wood-based panels parallel to the plane. In comparison to DIN 52367:2002-05 the scope of application, which was previously ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2006-12

DIN 6854:2006-12

Technetium generators - Requirements and operation

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2023-07

DIN 14462:2023-07

Planning, installation, operation and maintenance of fire hose systems, systems with fire hydrants and dry risers

from 173.40 EUR VAT included

from 162.06 EUR VAT excluded
To selection
Standard [CURRENT] 1993-07

DIN 18091:1993-07

Lifts; lift landing sliding doors for lift wells with walls of the fire resistant class F 90

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2019-04

DIN 14010:2019-04

Statements for fire statistics

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2023-10

DIN 2405:2023-10

Pipelines in refrigerating systems and cooling equipment - Marking

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2024-07

DIN 8986:2024-07

Cold rooms - Constructional safety requirements

This document specifies minimum constructional safety requirements for cold rooms that are not subject to building regulations or do not require a building permit. This document does not apply to ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2019-06

DIN 14210:2019-06

Artificially constructed water ponds for fire fighting

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 1992-04

DIN 18092:1992-04

Lifts; vertical sliding doors for small freight carrying lifts for lift shafts with walls of the fire-resistant class F 90

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2017-10

DIN 18093:2017-10

Pedestrian doorsets, industrial, commercial, garage doors and openable windows with fire resistance and/or smoke control characteristics - Installation and maintenance

The standard specifies requirements for the installation and maintenance of construction products with fire resistance and/or smoke control characteristics according to DIN EN 16034 and describes ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1997-01

DIN 18090:1997-01

Lifts - Lift landing doors (hinged, pivoted and folding) for lift walls with walls of the fire resistance class F 90

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2019-05

DIN 6876:2019-05

Operation of medical magnetic resonance systems

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2017-06

DIN 18716:2017-06

Photogrammetry and remote sensing - Terms and definitions

This standard defines photogrammetry and remote sensing terms for the acquisition and characterization of surfaces with imaging digital sensor systems. It serves to standardize the basic terms and ...

from 119.20 EUR VAT included

from 111.40 EUR VAT excluded
To selection
Standard [CURRENT] 2017-08

DIN 4121:2017-08

Hanging wire-plaster ceilings - Plaster ceilings with plaster-bearing steel-inserts, rabitz ceilings - Directions for the execution

The standard covers suspended wire plaster ceilings for attachment to load-bearing components in existing and new buildings. Suspended wire plaster ceilings within the meaning of this standard are ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2017-10

DIN 56955:2017-10

Entertainment technology - Load assumptions in stages and associated areas - Imposed loads

This standard applies to load assumptions, in particular permanent and variable loads and their combinations, for installations (technical equipment) in stages and their ancillary areas ...

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2018-01

DIN 18197:2018-01

Sealing of joints in concrete with waterstops

from 143.40 EUR VAT included

from 134.02 EUR VAT excluded
To selection
Standard [CURRENT] 2018-04

DIN 67528:2018-04

Lighting in public car-parks and on public off-street parking spaces

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2021-04

DIN 18200:2021-04

Assessment of conformity for construction products - Factory production control, third-party monitoring and certification

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page