DIN EN 14309:2013-04

This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately -180 °C to +80 °C. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this European Standard. Below an operating temperature of -50 °C, special tests regarding the suitability of the product in the intended application are advised (for example, liquefaction of oxygen). Manufacturers' advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, rolls, lags, pipe sections or other prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(m · K) at 10 °C are not covered by this standard. This standard does not cover products for in situ insulation (for loose fill or poured insulation) or products for the insulation of the building structure. This standard differs from DIN EN 14309:2010-03 as follows: a) ZA.1 "Scope and relevant characteristics" has been supplemented; b) Table ZA.3, second column, has been supplemented by "for load bearing applications" and "Water permeability". The standard has been prepared by CEN/TC 88 "Thermal insulating materials and products" (secretariat: DIN, Germany). The responsible national committee at the Building and Civil Engineering Standards Committee is NA 005-56-69 AA "Dämmstoffe für betriebstechnische Anlagen in Gebäuden und in der Industrie (SpA zu CEN/TC 88/WG 10)" ("Thermal insulation materials for building equipment and industrial installations (Mirror Committee of CEN/TC 88/WG 10))".