SAE Aerospace Material Specifications

2,602 search results

Standard [CURRENT] 2025-04-14

SAE AMS 4162G:2025-04-14

Aluminum Alloy, Extrusions, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511), Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up through 2.999 inches (76.2 mm) in diameter, least thickness, or wall thickness and 25 ...

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2022-10-04

SAE AMS 4163G:2022-10-04

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 2.999 inches (76.17 mm), inclusive, in thickness, nominal diameter or wall ...

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2025-03-25

SAE AMS 4164K:2025-03-25

Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross-sectional area of 32 square inches (206 cm2), maximum (see 8.6).

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2025-03-25

SAE AMS 4165K:2025-03-25

Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross-sectional area of 32 square inches (206 cm2), maximum (see 8.6).

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2024-09-10

SAE AMS 4172H:2024-09-10

Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510), Solution Heat Treated and Stress Relieved by Stretching

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing (see 8.6).

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2019-10-17

SAE AMS 4173G:2019-10-17

Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for parts requiring moderate strength and ...

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2024-12-05

SAE AMS 4174F:2024-12-05

Aluminum Alloy, Flash-Welded Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), Solution and Precipitation Heat Treated

This specification covers an aluminum alloy in the form of flash-welded rings 0.062 to 4.499 inches (1.57 to 114.27 mm), inclusive, in radial thickness with cross-sectional areas up to 32 square ...

84.50 EUR VAT included

78.97 EUR VAT excluded
To selection
Standard [CURRENT] 2025-01-22

SAE AMS 4177F:2025-01-22

Core, Flexible Honeycomb, Aluminum Alloy, For Sandwich Construction, 5056, 350 Fahrenheit (177 Celsius)

This specification covers an aluminum alloy in the form of honeycomb core in a non-hexagonal, flexible cell configuration, the core being treated for increased corrosion resistance and furnished ...

119.80 EUR VAT included

111.96 EUR VAT excluded
To selection
new

Standard [NEW] 2026-06-19

SAE AMS 4178H:2026-06-19

Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction, 5052, 350 Fahrenheit (177 Celsius)

This specification covers an aluminum alloy in the form of honeycomb core in a non-hexagonal, flexible cell configuration with the core being treated for increased corrosion resistance and ...

119.80 EUR VAT included

111.96 EUR VAT excluded
To selection
Standard [CURRENT] 2016-09-01

SAE AMS 4179D:2016-09-01

Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

96.30 EUR VAT included

90.00 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page