Produktsuche

Products for „..."

599,787 search results

Standard [CURRENT] 2018-10

DIN 675:2018-10

Flat countersunk head rivets - Nominal diameters 3 mm to 5 mm

Corrected document: Customers who purchased the previous document DIN 675:2011-03 received free of charge

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 43627:2018-12

House connection boxes for underground services for HRC-fuses size 00 up to 100 A, 500 V and size 1 up to 250 A, 500 V

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 14927:2018-11

Belt for positioning for firemen with 2-thorn-buckle and karabiner with multifunctional eye - Requirements, testing, marking

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 32701:2018-11

Information and Documentation - Determination of the effectiveness of paper deacidification processes by means of a test paper

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 87223:2018-12

Scupper with water trap, non shut-off type

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 87224:2018-12

Scupper with water trap, shut-off type

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 87225:2018-12

Scuppers for free decks

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 87226:2018-12

Scupper - Side cuppers for free decks

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 87371:2018-11

Remote control gear with transmission tubing - Holder for transmission tubing

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 87373:2018-11

Remote control gear with transmission tubing - Leading-through bearings, watertight

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 87374:2018-11

Remote control gear with transmission tubing - Deck operating devices, welding-in type

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-11

DIN 87375:2018-11

Remote control gear with transmission tubing - Deck operating devices with slewable crown gear unit, welding-in type

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2019-01

DIN 10500:2019-01

Food hygiene - Sales vehicles and mobile sales stands for perishable foodstuffs - Hygiene requirements, testing

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 2241:2018-07

Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 58774:2018-07

Production in optical engineering - Dimensions for punctures of vacuum chucks

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 58773:2018-07

Production in optical engineering - Interfaces for alignment lathes

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-10

DIN 6146:2018-10

Gas analysis - Preparation of calibration gas mixtures - Manometric method

Accessibility

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded
To selection
Standard [CURRENT] 2018-08

DIN 8075:2018-08

Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 10118:2018-07

Microbiological analysis of foodstuffs - Detection of verotoxins in food derived from animals using an immunological test system

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2018-08

DIN 35229:2018-08

Soft solder alloys - Tin and tin alloys - Analysis by spark optical emission spectrometry (S-OES)

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 967:2018-12

Cross recessed pan head screws with collar - Product grade A

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2019-05

DIN 6876:2019-05

Operation of medical magnetic resonance systems

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2020-05

DIN 18255:2020-05

Building hardware - Door lever handles, backplates and escutcheons - Definitions, dimensions, requirements and marking

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2020-04

DIN 18251:2020-04

Locks - Mortise locks and multipoint locks - Terms, definitions and dimensions

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2017-10

DIN 3842:2017-10

Valves for heating installations - Radiator fittings PN 10 - Dimensions, materials, design

This standard applies to the dimensions, materials and design of radiator fittings PN 10 with a spout and cap nut for the forms listed in Clause 3. This document has been prepared by Working ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2017-11

DIN 28083:2017-11

Support brackets with reinforcing plate

This standard allows for a pre-selection of the nominal size of support brackets and is to be used for support brackets with a reinforcing plate on apparatuses. In the course of the withdrawal of ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2017-10

DIN 4904:2017-10

Poured sealing clay for well construction - Requirements and testing

The standard applies to poured clay-based sealing materials for well and measuring point construction. In addition to physical and chemical requirements and the corresponding test methods ...

Accessibility

This standard is part of the DVGW body of rules.

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2018-04

DIN 32937:2018-04

Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2018-05

DIN 18252:2018-05

Profile cylinders for door locks - Terminology, dimensions, requirements, test methods and marking

Accessibility

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded
To selection
Standard [CURRENT] 2018-04

DIN 10969:2018-04

Sensory analysis - Descriptive analysis with following quality evaluation

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-04

DIN 83423:2018-04

Strainer covers for bilge wells

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 1998:2018-07

Placement of service conduits in public circulation areas - Guideline for planning

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 82048:2018-07

Double yoke pieces for span trunnion

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-06

DIN 82024:2018-06

Round eye plates

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 13500:2018-07

Box bodies for road ambulances - Requirements and test methods

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-06

DIN 19404:2018-06

Dentistry - Designations for the parts and dimensions of an implant body

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 80705:2018-07

Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 5499:2018-07

Gross and Net Calorific Values - General principles

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 14346:2018-07

Firefighting and fire protection - Mobile backflow preventer B-FW

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2018-07

DIN 878:2018-07

Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for measurement errors

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 32546:2026-08

Torque seal

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 28127:2026-08

Flow funnels for half-pipe coil jackets for vessels

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 604:2026-08

Flat countersunk head nib bolts

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 34828:2026-08

Welding studs for turnbuckles

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 605:2026-08

Flat countersunk head square neck bolts with long square

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 607:2026-08

Cup head nib bolts

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 608:2026-08

Flat countersunk head square neck bolts with short square

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 83204:2026-08

Stairs and guard rails for engine rooms and boiler rooms in seagoing ships - Fundamental requirements

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 11865:2026-08

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Tees, elbows, reducers and caps

Accessibility

from 130.90 EUR VAT included

from 122.34 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 85031:2026-08

Ships and marine technology - Steel expansion joints

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page