Produktsuche

Standard [CURRENT] 2007-09

DIN 28185:2007-09

Components for tubular heat exchangers

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Steel U-tubes for tubular heat exchangers - Technical delivery conditions

Standard [CURRENT] 2007-09

DIN 28179:2007-09

Steel U-tubes for tubular heat exchangers - Technical delivery conditions

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Strips and sheets of wrought nickel and nickel alloys - Properties

Standard [CURRENT] 2021-05

DIN 17750:2021-05

Strips and sheets of wrought nickel and nickel alloys - Properties

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2021-07

DIN 13017:2021-07

Graphical symbols for textile machinery

Accessibility

from 130.90 EUR VAT included

from 122.34 EUR VAT excluded

To selection

Non-soldering compression couplings - Union nuts for butt joints

Standard [CURRENT] 2012-02

DIN 3872:2012-02

Non-soldering compression couplings - Union nuts for butt joints

This standard applies for union nuts for butt joints with cutting ring used in air braking systems and other compressed air systems in road vehicles. This standard has been prepared by Working ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Testing of solid fuels - Determination of Hardgrove grindability index of hard coal

Standard [CURRENT] 2001-07

DIN 51742:2001-07

Testing of solid fuels - Determination of Hardgrove grindability index of hard coal

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method

Standard [CURRENT] 2001-08

DIN 51721:2001-08

Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Testing of solid fuels - Determination of the bulk density of solid fuels

Standard [CURRENT] 2001-06

DIN 51705:2001-06

Testing of solid fuels - Determination of the bulk density of solid fuels

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Mine cars - Front wall, casing, frame, buffer sheet

Standard [CURRENT] 2012-01

DIN 20551:2012-01

Mine cars - Front wall, casing, frame, buffer sheet

Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Wheel sets with taper roller bearings for mine cars; without springs

Standard [CURRENT] 2012-01

DIN 20553:2012-01

Wheel sets with taper roller bearings for mine cars; without springs

Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Wheel sets with taper roller bearings for mine cars, exterior spring suspension

Standard [CURRENT] 2012-01

DIN 20555:2012-01

Wheel sets with taper roller bearings for mine cars, exterior spring suspension

Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Wheel sets with taper roller bearings for mine cars, interior spring suspension

Standard [CURRENT] 2012-01

DIN 20556:2012-01

Wheel sets with taper roller bearings for mine cars, interior spring suspension

Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

Standard [CURRENT] 2012-01

DIN 20586:2012-01

Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Standard [CURRENT] 2012-02

Sleepers are intended to hold the tracks of the mine cars in their defined position and to transfer the forces of the tracks resulting from the imposed loads onto the track bed. Accordingly, their ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Terms and definitions used on ageing of materials - Polymeric materials

Standard [CURRENT] 2012-09

DIN 50035:2012-09

Terms and definitions used on ageing of materials - Polymeric materials

DIN 50035 has been prepared by the Plastics Standards Committee (FNK), Working Committee 054-01-04 AA "Verhalten gegen Umgebungseinflüsse" ("Environmental resistance"). It contains general ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Support rings for carbon and stainless steel agitator vessels - Position

Standard [CURRENT] 2012-02

DIN 28160:2012-02

Support rings for carbon and stainless steel agitator vessels - Position

This standard applies for the position of support rings for carbon and stainless steel agitator vessels according to DIN 28136-1, form A and form B. The standard has been prepared by Working ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Flat link chains for use in continuous conveyors in mining

Standard [CURRENT] 2012-05

DIN 22255:2012-05

Flat link chains for use in continuous conveyors in mining

In underground mining, coal occurs during loosening (with shearer loaders, amongst others) as lumpy debris mixed with rock with individual pieces of very different sizes and hardness. For ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Slackline systems - General and safety requirements and test methods

Standard [CURRENT] 2012-02

DIN 79400:2012-02

Slackline systems - General and safety requirements and test methods

This standard applies to slackline systems installed at jump height. It specifies terms and definitions, safety requirements for the material and all components used, including the mounting, as ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Standard [CURRENT] 2014-02

DIN 58299:2014-02

Toothings (Serrations) for surgical instruments - Profile angles, groove distances

This document contains specifications on toothings (serrations) for surgical instruments intended for holding or clamping, for example, for artery forceps. This document does not relate to ...

Accessibility

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded

To selection

Standard [CURRENT] 2014-02

DIN 58300:2014-02

Joints for surgical instruments

This document specifies joints for surgical instruments and their designations. In standards concerning particular instruments, type and characteristics of the respective joint are specified by ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2014-03

DIN 9834:2014-03

Tools for pressing - Guide bushes

This standard specifies the dimensions and designation for guide bushes that are fixed with holders according to DIN 9832 and used for guide pillars according to DIN 9833. This standard has been ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

Standard [CURRENT] 2014-08

DIN 19742:2014-08

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

Phthalates are mainly used as plasticizers for plastics such as PVC and nitrocellulose. For the evaluation of phthalates, a fundamental distinction is made between low-molecular (for example ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Pressure limitation valve, nominal pressure 16

Standard [CURRENT] 2014-08

DIN 14380:2014-08

Pressure limitation valve, nominal pressure 16

A pressure limitation device according to this standard is an adjustable fire fighting fitting reducing excessive pressures by draining water in order to prevent excessive strain of pressure hoses.

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Information and documentation - Romanization of Japanese

Standard [CURRENT] 2014-08

DIN 32708:2014-08

Information and documentation - Romanization of Japanese

This standard specifies the romanization of the Japanese Kana syllabary in Latin letters in accordance with the modified Hepburn-system. This romanization shall be preferred due to its ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Fixed guard rails on deck of sea-going passenger ships

Standard [CURRENT] 2014-09

DIN 81706:2014-09

Fixed guard rails on deck of sea-going passenger ships

This standard describes guard rails on deck of sea-going passenger ships in the passenger area. It contains safety specifications, specifies the dimensions, materials and the surface protection ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

Standard [CURRENT] 2014-08

DIN 21773:2014-08

Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

The tooth thickness and its deviations are fundamental variables for the determination of the backlash of the wheel pair. DIN 3960:1987, 3.8 "Test dimensions for the tooth thickness" defined ...

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Protrusions on turned parts - Indications on drawings

Standard [CURRENT] 2014-06

DIN 6785:2014-06

Protrusions on turned parts - Indications on drawings

This standard shall be used for technical documents. It specifies terms and language-independent indications on drawings for protrusions with indeterminate form. With respect to DIN 6785:1991-11 ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2014-06

DIN 468:2014-06

Crank handles, offset type

These two German standards specify product requirements for offset-type and straight-pattern crank handles. These crank handles are used for manual operation and adjustment in mechanical ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2021-02

DIN 5381:2021-02

Identification colours

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Brewhouse plants - Minimum specifications

Standard [CURRENT] 2021-02

DIN 8777:2021-02

Brewhouse plants - Minimum specifications

Accessibility

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

Testing of liquid fuels - Determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation

Standard [CURRENT] 2020-07

DIN 51784:2020-07

Testing of liquid fuels - Determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Water pipelines - Valve boxes for stop valves

Standard [CURRENT] 2020-07

DIN 4056:2020-07

Water pipelines - Valve boxes for stop valves

Accessibility

This standard is part of the DVGW body of rules.

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2020-07

DIN 28178:2020-07

Swirlpipes - Dimensions and materials

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Criteria for the use of windows and external doors in accordance with DIN EN 14351-1

Standard [CURRENT] 2020-09

DIN 18055:2020-09

Criteria for the use of windows and external doors in accordance with DIN EN 14351-1

Accessibility

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

Water pipelines - Valve boxes for underground hydrants

Standard [CURRENT] 2020-07

DIN 4055:2020-07

Water pipelines - Valve boxes for underground hydrants

Accessibility

This standard is part of the DVGW body of rules.

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Pressure resistant circular sight glasses of soda-lime-glass

Standard [CURRENT] 2020-08

DIN 8902:2020-08

Pressure resistant circular sight glasses of soda-lime-glass

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Bolts and screws with external hexalobular driving feature with large flange

Standard [CURRENT] 2021-08

DIN 34801:2021-08

Bolts and screws with external hexalobular driving feature with large flange

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Testing of bitumen and polymer bitumen sheets

Standard [CURRENT] 2014-06

DIN 52123:2014-06

Testing of bitumen and polymer bitumen sheets

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions

Standard [CURRENT] 2014-08

DIN 18101:2014-08

Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions

This standard applies to single, rebated and unrebated door leaves with or without top blind/panel in steel door frames according to DIN 18111-1, -2 and -3 and in wooden door frames according to ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Testing of paper and board - Determination of the bending stiffness by the beam method

Standard [CURRENT] 2014-08

DIN 53121:2014-08

Testing of paper and board - Determination of the bending stiffness by the beam method

This document has been prepared by NA 074-02-03 AA "Physikalisch-technische Prüfverfahren für Papier, Pappe und Faserstoff" ("Physical-technological test methods for paper and board"). This ...

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Locks for waterways for inland navigation - Principles for dimensioning and equipment

Standard [CURRENT] 2014-06

DIN 19703:2014-06

Locks for waterways for inland navigation - Principles for dimensioning and equipment

The standard specifies requirements for dimensioning, equipment, construction and overall arrangement of massive locks for waterway for inland navigation to be newly erected. The standard shall be ...

Accessibility

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

Sands and gravels for well construction - Requirements and testing

Standard [CURRENT] 2014-07

DIN 4924:2014-07

Sands and gravels for well construction - Requirements and testing

This standard is an updated new edition. The requirement and tests for sands and gravels for well construction are specified. The sands and gravels are introduced as filter layers during ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

Standard [CURRENT] 2014-11

DIN 8130:2014-11

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

This standard is the German translation of Recommendation OIML R 107-1:2007 "Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and ...

Accessibility

from 192.10 EUR VAT included

from 179.53 EUR VAT excluded

To selection

Standard [CURRENT] 2014-09

DIN 6162:2014-09

Determination of iodine colour number

This standard specifies a method for determining the colour strength of clear liquids such as solvents, plasticizers, resins, resin solutions, oils and fatty acids with a colour similar to the ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection