Produktsuche

Standard [CURRENT] 1986-02

DIN 4626:1986-02

Center bolts for laminated leaf springs

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Overflow valves and hollow screw for fuel injection devices

Standard [CURRENT] 1986-02

DIN 73368:1986-02

Overflow valves and hollow screw for fuel injection devices

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Microbiological analysis of milk - Determination of presumptive Bacillus cereus - Colony count technique at 37 °C

Standard [CURRENT] 2010-07

DIN 10198:2010-07

Microbiological analysis of milk - Determination of presumptive Bacillus cereus - Colony count technique at 37 °C

This standard specifies, in addition to DIN EN ISO 7932, a colony counting method for the determination of the number of presumptive Bacillus cereus (B. cereus, for short) at 37 °C using a PEMBA ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Milk and milk products - Determination of the citric acid content - Enzymatic method

Standard [CURRENT] 2010-07

DIN 10325:2010-07

Milk and milk products - Determination of the citric acid content - Enzymatic method

This standard specifies an enzymatic method for the determination of the citric acid or citrate content of milk and milk products. The method is applicable to milk, cheese, processed cheese ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Milk and milk products except milk powder - Determination of L- and D-lactic acid (L- and D-lactat) content - Enzymatic method

Standard [CURRENT] 2010-09

DIN 10335:2010-09

Milk and milk products except milk powder - Determination of L- and D-lactic acid (L- and D-lactat) content - Enzymatic method

The standard specifies an enzymatic method for the determination of the L- and D-lactic acid (L- and D-lactate) content of milk products except milk powder. For milk powder, the method described ...

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for exhaust and forced ventilation - Spiral ventilation ducts

Standard [CURRENT] 2010-07

DIN 21605:2010-07

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for exhaust and forced ventilation - Spiral ventilation ducts

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for forced ventilation - Flat ventilation ducts

Standard [CURRENT] 2010-07

DIN 21606:2010-07

Auxiliary ventilation for mining - Flexible plastic ventilation ducts for forced ventilation - Flat ventilation ducts

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Auxiliary ventilation for mining - Flexible plastic air ducts - Requirements and test methods

Standard [CURRENT] 2010-07

DIN 21610:2010-07

Auxiliary ventilation for mining - Flexible plastic air ducts - Requirements and test methods

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Auxiliary ventilation for mining - Cladding material for flexible airducts - Requirements, testing

Standard [CURRENT] 2010-07

DIN 21612:2010-07

Auxiliary ventilation for mining - Cladding material for flexible airducts - Requirements, testing

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Fans with electric motor drive intended for use in potentially explosive atmospheres in coal mines

Standard [CURRENT] 2010-07

DIN 21625:2010-07

Fans with electric motor drive intended for use in potentially explosive atmospheres in coal mines

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Gymnastic equipment - Vaulting tables - Functional and safety requirements, test methods

Standard [CURRENT] 2010-07

DIN 33959:2010-07

Gymnastic equipment - Vaulting tables - Functional and safety requirements, test methods

This standard specifies functional requirements and specific safety requirements for three types of vaulting tables in addition to the general safety requirements in DIN EN 913. This document has ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Inland navigation vessels - Minimum requirements for habitations

Standard [CURRENT] 2016-11

DIN 80103:2016-11

Inland navigation vessels - Minimum requirements for habitations

This standard applies to inland navigation vessels. Inland navigation vessels on which the permanent presence of crew members is required even outside working hours have to be provided with living ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Aerospace series - Shims for anchor nuts with MJ-thread

Standard [CURRENT] 2016-12

DIN 65501:2016-12

Aerospace series - Shims for anchor nuts with MJ-thread

This standard has been prepared by experts of Working Committee NA 131-03-01 AA "Verbindungselemente ("Aerospace fasteners) at DIN Standards Committee Aerospace (NL). This standard specifies the ...

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Aerospace series - Hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel - Class: 1100 MPa/315 °C; Text in German and English

Standard [CURRENT] 2016-12

DIN 65480:2016-12

Aerospace series - Hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel - Class: 1100 MPa/315 °C; Text in German and English

This document has been prepared by experts of NA 131-03-01 AA "Fasteners (mirror committee to ISO/TC 20/SC 4)" of DIN Standards Committee Aerospace (NL) taking into account relevant resolutions ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts

Standard [CURRENT] 2016-11

DIN 65208:2016-11

Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts

This document has been prepared by experts of the Working Committee NA 131-03-01 AA "Verbindungselemente (Spiegelausschuss zu ISO/TC 20/SC 4", Fachbereich Mechanik ("Aerospace fasteners (mirror ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Linear motion rolling bearings - Flat cage rail guide - Dimensions and tolerances

Standard [CURRENT] 2016-12

DIN 644:2016-12

Linear motion rolling bearings - Flat cage rail guide - Dimensions and tolerances

This standard specifies the installation and connection dimensions for modular rail guides with flat cages. This linear rolling guide unit consists of two flat rails with the same or complementary ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary

Standard [CURRENT] 2016-11

DIN 51401:2016-11

Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary

This document has been prepared by Working Committee NA 062-08-15 AA "Grundlagen der analytischen Atomspektroskopie" ("Basic principles of analytical atomic spectroscopy") at DIN Standards ...

Corrected document: Customers who purchased the previous document DIN 51401:2016-04 received free of charge

from 124.80 EUR VAT included

from 116.64 EUR VAT excluded

To selection

Intellectual property management systems - Requirements

Standard [CURRENT] 2020-06

DIN 77006:2020-06

Intellectual property management systems - Requirements

from 130.90 EUR VAT included

from 122.34 EUR VAT excluded

To selection

Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015

Standard [CURRENT] 2016-09

DIN 35230:2016-09

Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015

This standard contains the European Technical Specification CEN/TS 16982 for the minimum content of welding procedure specifications for the following welding processes: - hot gas welding: round ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Detection of the animal species in milk and milk products with isoelectrical focusing

Standard [CURRENT] 1995-11

DIN 10469:1995-11

Detection of the animal species in milk and milk products with isoelectrical focusing

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Flange joints for process vessels - Flat gaskets

Standard [CURRENT] 2024-02

DIN 28040:2024-02

Flange joints for process vessels - Flat gaskets

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings (ISO/TS 16281:2008 + Cor. 1:2009)

Standard [CURRENT] 2010-11

DIN 26281:2010-11

Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings (ISO/TS 16281:2008 + Cor. 1:2009)

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-08 "Tragzahlen und Lebensdauer" ("Load ratings and life"). This standard ...

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Standard [CURRENT] 2011-02

DIN 101:2011-02

Rivets - Technical specifications

This document has been prepared by the Fasteners Standards Committee (FMV), Working Committee NA 067-00-09 AA "Verbindungselemente ohne Gewinde" ("Fasteners without thread"). This standard ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Countersunk head rivets - Nominal diameters 1 mm to 8 mm

Standard [CURRENT] 2011-03

DIN 661:2011-03

Countersunk head rivets - Nominal diameters 1 mm to 8 mm

This document has been prepared by the Fasteners Standards Committee (FMV), Working Committee NA 067-00-09 AA "Verbindungselemente ohne Gewinde" ("Fasteners without thread"). This standard applies ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling bearings - Lockwashers; Safety plate, Lockclip

Standard [CURRENT] 2011-04

DIN 5406:2011-04

Rolling bearings - Lockwashers; Safety plate, Lockclip

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Corrected document: Customers who purchased the previous document DIN 5406:2009-05 received free of charge

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Securing parts for rolling bearings - Snap rings for bearings with ring groove

Standard [CURRENT] 2011-06

DIN 5417:2011-06

Securing parts for rolling bearings - Snap rings for bearings with ring groove

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Flange joints for process vessels - Weld-neck flanges for pressurized vessels

Standard [CURRENT] 2013-09

DIN 28034:2013-09

Flange joints for process vessels - Weld-neck flanges for pressurized vessels

This standard specifies dimensions and designations for weld-neck flanges for pressure vessels. This document has been prepared by Working Committee NA 012-00-01 AA "Anlagenteile" ("Process ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Flange joints for process vessels - Weld flanges for unpressurized process vessels

Standard [CURRENT] 2013-09

DIN 28031:2013-09

Flange joints for process vessels - Weld flanges for unpressurized process vessels

This standard specifies dimensions, types and designations of weld flanges for unpressurized process vessels. This document has been prepared by Working Committee NA 012-00-01 AA "Anlagenteile" ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Systematic arrangement of documents - Protection against falsification and quality criteria for the release of digital product data

Standard [CURRENT] 2013-10

DIN 6789:2013-10

Systematic arrangement of documents - Protection against falsification and quality criteria for the release of digital product data

Technical documents are integrated into a complex environment. This relates both to the processes they result from as well as to their own, often complex, structure and the framework conditions ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721

Standard [CURRENT] 2020-01

DIN 74:2020-01

Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Rolling bearings; dimensions for mounting

Standard [CURRENT] 1993-02

DIN 5418:1993-02

Rolling bearings; dimensions for mounting

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Technical product documentation - Identification of characteristics on technical drawings

Standard [CURRENT] 2006-11

DIN 6770:2006-11

Technical product documentation - Identification of characteristics on technical drawings

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling Bearings - Tapered roller bearings

Standard [CURRENT] 2008-08

DIN 720:2008-08

Rolling Bearings - Tapered roller bearings

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Standard [CURRENT] 2009-06

DIN 981:2009-06

Rolling bearings - Locknuts

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Standard [CURRENT] 2009-05

DIN 5415:2009-05

Rolling bearings - Adapter sleeves

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Standard [CURRENT] 2009-05

DIN 5416:2009-05

Rolling bearings - Withdrawal sleeves

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Conical spring washers for bolted connections

Standard [CURRENT] 2009-08

DIN 6796:2009-08

Conical spring washers for bolted connections

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2010-05

DIN 611:2010-05

Rolling bearings - Summary

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded

To selection

Rolling bearings - Single direction thrust ball bearings

Standard [CURRENT] 2010-05

DIN 711:2010-05

Rolling bearings - Single direction thrust ball bearings

This standard specifies dimensions and symbols for single direction thrust ball bearings with flat housing washers, crowned housing washers and with support washers. In consideration of the ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling bearings - Seals for bearing housings - Dimensions for felt rings and felt strips

Standard [CURRENT] 2010-05

DIN 5419:2010-05

Rolling bearings - Seals for bearing housings - Dimensions for felt rings and felt strips

This standard specifies dimensions and designations for felt rings and felt strips which are used for sealing radial bearing housings. In addition the dimensions for the corresponding ring groove ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2013-04

DIN 78:2013-04

Protrusions of bolt ends

This document specifies bolt end protrusions for general purpose assemblies of bolts, screws and similar fasteners with ISO metric screw thread in accordance with DIN 13-28, and with tapping screw ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

Standard [CURRENT] 2014-08

DIN 21773:2014-08

Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

The tooth thickness and its deviations are fundamental variables for the determination of the backlash of the wheel pair. DIN 3960:1987, 3.8 "Test dimensions for the tooth thickness" defined ...

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection