Produktsuche

Decontamination showers for laboratories and industry

Standard [CURRENT] 2025-12

DIN 12042:2025-12

Decontamination showers for laboratories and industry

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Soil quality - Instructions for mapping erosion and accumulation forms caused by wind

Standard [CURRENT] 2025-12

DIN 19713:2025-12

Soil quality - Instructions for mapping erosion and accumulation forms caused by wind

from 143.40 EUR VAT included

from 134.02 EUR VAT excluded

To selection

Automatic electrical controls for installation in drinking water systems - Requirements for solenoid valves

Standard [CURRENT] 2025-12

DIN 35911:2025-12

Automatic electrical controls for installation in drinking water systems - Requirements for solenoid valves

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Standard [CURRENT] 2024-05

DIN 580:2024-05

Lifting eye bolts

This document has been prepared by DIN Standards Committee Fasteners (FMV), Working Committee NA 067-00-08 AA "Verbindungselemente mit Sonderformen und aus Kunststoff" ("Fasteners with special ...

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Compression fittings for shipboard use - 24° fittings with metric thread - Technical specification

Standard [CURRENT] 2025-06

DIN 86127:2025-06

Compression fittings for shipboard use - 24° fittings with metric thread - Technical specification

This document specifies the technical delivery conditions for pipe fittings (hereinafter referred to as "fittings"). They apply to complete fittings and their individual parts, such as pipe ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Laboratory glassware - Straight bore stopcocks

Standard [CURRENT] 2024-12

DIN 12541:2024-12

Laboratory glassware - Straight bore stopcocks

This document applies to replaceable (abbreviation NS) and non-replaceable straight bore stopcocks made from glass, nominal sizes 10/2 to 29/10. The plug can be made of hollow (H) or solid (M) ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Laboratory glassware - Stopcocks, cone 1 : 10 - Conditions for interchangeability

Standard [CURRENT] 2024-12

DIN 12540:2024-12

Laboratory glassware - Stopcocks, cone 1 : 10 - Conditions for interchangeability

This document specifies the conditions for interchangeability of independently manufactured plugs and plug sleeves. This document is applicable to interchangeable (abbreviation NS) straight bore ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Laboratory glassware - Double oblique bore stopcocks

Standard [CURRENT] 2024-12

DIN 12553:2024-12

Laboratory glassware - Double oblique bore stopcocks

This document applies to interchangeable (abbreviation NS) double oblique bore stopcocks made from glass (P), nominal sizes 3 and 4, with solid (M) or hollow (H) plugs and elbow connections (B).

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Welding necks of CuNi10Fe1,6Mn and CuNi30Mn1Fe - Technical specifications

Standard [CURRENT] 2024-12

DIN 86028:2024-12

Welding necks of CuNi10Fe1,6Mn and CuNi30Mn1Fe - Technical specifications

This document specifies restrictions on manufacturing processes and approval tests for welding necks in accordance with DIN 85387-2, DIN 86037-2, and VG 85356-2 made of CuNi10Fe1,6Mn or ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Lightning current tests - Flanges with electrically conductive gaskets

Standard [CURRENT] 2024-12

DIN 30691:2024-12

Lightning current tests - Flanges with electrically conductive gaskets

This standard specifies requirements for testing electrically conductive gaskets in flange connections in accordance with DIN EN 62561-1, which are to be used as lightning protection system ...

This standard is part of the DVGW body of rules.

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Dust emission of technical equipment - Basic method for determination of the dust emission rate of machines intended for the use on work tables

Standard [CURRENT] 2016-07

DIN 33896:2016-07

Dust emission of technical equipment - Basic method for determination of the dust emission rate of machines intended for the use on work tables

The standard specifies a method for determining the dust emission rate of small table-top machines that can be operated as intended or in a practical manner using a test bench. The document ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

External protective coating of underground steel tanks - Requirements and testing

Standard [CURRENT] 2016-07

DIN 6607:2016-07

External protective coating of underground steel tanks - Requirements and testing

This standard applies to the protective external coating of underground steel tanks and their steel manhole shafts and manhole shaft collars, insofar as they are welded on at the manufacturer's works.

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Workmanship of steel tanks for the storage of liquids - Factory production control

Standard [CURRENT] 2016-07

DIN 6600:2016-07

Workmanship of steel tanks for the storage of liquids - Factory production control

This standard specifies the requirements for factory production control of manufacturing plants of factory-made or predominantly factory-made vessels (tanks) with a permissible working pressure of ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Steel manhole shafts for the underground tanks designed for the storage of flammable and non-flammable water polluting liquids

Standard [CURRENT] 2016-11

DIN 6626:2016-11

Steel manhole shafts for the underground tanks designed for the storage of flammable and non-flammable water polluting liquids

This standard has been prepared by Working Committee NA 104-01-02 AA "Werksgefertigte Metalltanks" ("Shop-fabricated metal tanks") at DIN Standards Committee Tank Installations (NATank). This ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Production processes of autogenous engineering - Survey

Standard [CURRENT] 2009-12

DIN 8522:2009-12

Production processes of autogenous engineering - Survey

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Pressure resistant circular sight glasses made of thermally toughened borosilicate glass without limitation in the range of low temperature

Standard [CURRENT] 2025-05

DIN 7080:2025-05

Pressure resistant circular sight glasses made of thermally toughened borosilicate glass without limitation in the range of low temperature

This document applies to thermally toughened round sight glass panes made of borosilicate glass with a thickness of at least 6,5 mm, which are subjected to permanent or cyclic stress from ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass

Standard [CURRENT] 2001-05

DIN 59200:2001-05

Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2025-12

DIN 443:2025-12

Sealing push-in caps

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2002-04

DIN 250:2002-04

Radii

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys

Standard [CURRENT] 2002-07

DIN 5520:2002-07

Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2024-11

DIN 1450:2024-11

Typefaces - Legibility

This document describes how fonts are legibly displayed. The specifications ensure that text information is legible under normal conditions. This does not apply to areas for which special ...

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded

To selection

Wood bits - Forstner bits and hinge boring bits

Standard [CURRENT] 2024-11

DIN 7483:2024-11

Wood bits - Forstner bits and hinge boring bits

This document has been prepared by Working Committee NA 121-01-05 AA "Bohrwerkzeuge für Holz, Stein und Beton" ("Drilling tools for wood, stone, and concrete") at DIN Standards Committee Tools and ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Metallic coatings - Electrodeposited chromium coatings with chromium(III)-based electrolytes on copper-nickel coatings on plastics - Requirements and test methods

Standard [CURRENT] 2024-12

DIN 53099:2024-12

Metallic coatings - Electrodeposited chromium coatings with chromium(III)-based electrolytes on copper-nickel coatings on plastics - Requirements and test methods

This document specifies requirements for corrosion-resistant decorative-functional chromium coatings electrodeposited from chromium(III)-based electrolytes on nickel and copper-nickel coatings on ...

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated plastics - Determination of stiffness in bending - Method according to Cantilever

Standard [CURRENT] 2024-11

DIN 53362:2024-11

Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated plastics - Determination of stiffness in bending - Method according to Cantilever

This document specifies a test method for measuring the overhanging length on a specific test specimen under defined conditions and taking this to calculate the bending stiffness as a measured value.

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing

Standard [CURRENT] 1991-09

DIN 16195:1991-09

Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Apparatus for sensory analysis - Wine testing glasses

Standard [CURRENT] 2000-06

DIN 10960:2000-06

Apparatus for sensory analysis - Wine testing glasses

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2020-09

DIN 10950:2020-09

Sensory analysis - Basic principles

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Standard [CURRENT] 2013-06

DIN 10973:2013-06

Sensory analysis - In/out test

The standard has been prepared by the Food and Agricultural Products Standards Committee (NAL), Working Committee NA 057-01-01 AA "Sensorik" ("Sensory analysis"). It specifies a sensory test ...

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Sensory analysis - Simple descriptive test

Standard [CURRENT] 2014-11

DIN 10964:2014-11

Sensory analysis - Simple descriptive test

The standard has been prepared by Working Committee NA 057-01-01 AA "Sensorik" ("Sensory analysis") of the DIN Standards Committee Food and Agricultural Products (NAL). The previous standard ...

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

Barrier-free accessible playground equipment - Safety requirements and test methods

Standard [CURRENT] 2016-04

DIN 33942:2016-04

Barrier-free accessible playground equipment - Safety requirements and test methods

The revision of DIN 33942 became necessary because, on the one hand, the technical development of playground equipment has progressed and, on the other hand, the DIN EN 1176 series of standards ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Sensory analysis - Difference from Control-Test (DfC-Test)

Standard [CURRENT] 2016-08

DIN 10976:2016-08

Sensory analysis - Difference from Control-Test (DfC-Test)

This standard specifies a sensory test method in which a group of testers determines the magnitude and nature of the difference between one or more test samples compared to a reference sample ...

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded

To selection

Sensory analysis - Descriptive analysis with following quality evaluation

Standard [CURRENT] 2018-04

DIN 10969:2018-04

Sensory analysis - Descriptive analysis with following quality evaluation

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Sensory analysis - Sensory claims - Verification of product-related and comparative claims

Standard [CURRENT] 2021-02

DIN 10977:2021-02

Sensory analysis - Sensory claims - Verification of product-related and comparative claims

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Sensory analysis - Testing of food contact materials and articles (FCM)

Standard [CURRENT] 2024-01

DIN 10955:2024-01

Sensory analysis - Testing of food contact materials and articles (FCM)

Corrected document: Customers who purchased the previous document DIN 10955:2023-10 received free of charge

from 143.40 EUR VAT included

from 134.02 EUR VAT excluded

To selection

Standard [CURRENT] 2002-09

DIN 10970:2002-09

Sensory analysis - Time intensity test

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Sensory analysis - Expert witness for the judgement of conformity with foodlaw

Standard [CURRENT] 2005-04

DIN 10975:2005-04

Sensory analysis - Expert witness for the judgement of conformity with foodlaw

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use

Standard [CURRENT] 2007-08

DIN 10956:2007-08

Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Standard [CURRENT] 2015-11

DIN 99:2015-11

Tapered handles

This standard applies to steel tapered handles with a bore or threaded handle receptacle. It contains dimensions and information on material and design for tapered handles. The decisive change to ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2015-11

DIN 6337:2015-11

Ball handles

This standard applies to ball handles made of steel with ball knob according to DIN 319 and a bore or threaded handle receptacle. It contains dimensions and information on material and design for ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Handwheels, dished - Hub hole round or straight square

Standard [CURRENT] 2018-02

DIN 950:2018-02

Handwheels, dished - Hub hole round or straight square

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2018-02

DIN 3670:2018-02

Hand wheels, disc type

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Squares for operating spindles and operating elements

Standard [CURRENT] 2013-02

DIN 79:2013-02

Squares for operating spindles and operating elements

This standard specifies the dimensions as well as tolerance classes and tolerances of internal and external squares used on or in operating element, for example, hand-wheels, crank handles or grips.

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2014-06

DIN 468:2014-06

Crank handles, offset type

These two German standards specify product requirements for offset-type and straight-pattern crank handles. These crank handles are used for manual operation and adjustment in mechanical ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2014-06

DIN 469:2014-06

Crank handles, straight pattern

These two German standards specify product requirements for offset-type and straight-pattern crank handles. These crank handles are used for manual operation and adjustment in mechanical ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection