Produktsuche

Products for „..."

594,583 search results

Standard [CURRENT] 2013-12

DIN 929:2013-12

Hexagon weld nuts

This standard specifies requirements for hexagon weld nuts with coarse metric threads from sizes M3 to M16 and with fine pitch metric threads with nominal diameters from 8 mm to 16 mm in product ...

Corrected document: Customers who purchased the previous document DIN 929:2013-05 received free of charge

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2021-01

DIN 13182:2021-01

Medical instruments - Gall duct forceps type Lahey and type Gray

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-01

DIN 13459:2021-01

Medical instruments - Needle holder type Stratte with carbide inserts

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58243:2021-02

Medical instruments - Intestinal forceps type Kocher

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58244:2021-02

Medical instruments - Intestinal forceps type Mayo-Robson

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58245:2021-02

Medical instruments - Towel clamps type Backhaus

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58285:2021-02

Medical instruments - Retractor type Volkmann

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58313:2021-02

Medical instruments - Cotton carrier, straight

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58852:2021-02

Medical instruments - Probes

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58853:2021-02

Medical instruments - Probes with eye

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58858:2021-02

Medical instruments - Director type König

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 96053:2021-02

Medical instruments - Retractor type Ollier

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 96058:2021-02

Medical instruments - Elevator and bone lever type Lange-Hohmann

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 58273:2021-02

Medical instruments - Fixation forceps

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2021-02

DIN 96073:2021-02

Medical instruments - Tongue depressor, double-ended

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2021-06

DIN 13199:2021-06

Medical instruments - Ethmoid rongeur forceps type Weil-Blakesley and Watson-Williams

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2024-07

DIN 51545:2024-07

Testing of lubricants and related products - Determination of the temperature stability of turbine oils

This document specifies the temperature resistance test for turbine oils. This document is applicable to lubricants with or without additives to improve the load-carrying capacity on gear surfaces ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2014-01

DIN 7287:2014-01

Steel axes and hatchets - Technical specifications

This German standard specifies the technical specifications for the manufacture and usability of steel axes and hatchets for the processing of wood, unless deviating specifications are ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-11

DIN 72537:1992-11

Road vehicles; interference-suppression filters; dimensions for mounting and connecting

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-11

DIN 29965:1992-11

Aerospace; carbon fibres; carbon fibre filament yarns; technical specification

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2014-02

DIN 86066:2014-02

Cast steel welding elbows for storm valves - DN 50 to DN 150, flangeconnecting dimensions according to PN 10

Welding elbows in accordance with this standard are used for termination of storm valves onto the hull of ships in pipe systems. The dimensions and materials of these welding elbows are specified ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1992-11

DIN 65572:1992-11

Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 1993-06

DIN 76033:1993-06

Tow ropes for passenger cars; requirements, testing, inspection

This document has been corrected by

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2014-09

DIN 51921:2014-09

Testing of carbonaceous materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials

related products insoluble in quinoline. The matter soluble in quinoline of the sample to investigate are extracted at 80 °C. The insoluble matter is filtered, dried and weighed. The matter ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2014-09

DIN 14851:2014-09

Ceiling hook

Ceiling hooks for fire brigades serve for tearing down, pushing in and pulling out structural components and other objects. The ceiling hook consists of a hook and a continuously telescopable ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2014-09

DIN 10535:2014-09

Food hygiene - Retail bake-off stations - Hygienic requirements

The standard specifies hygienic requirements for the structural design, equipment and operation of bake-off stations for the preparation and sale of bakery and pastry products. It applies to ...

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2014-10

DIN 7939:2014-10

Swimming equipment - Dividing ropes for use in swimming baths - requirements and testing

This standard exclusively applies for dividing ropes across the water surface with the help of which non-swimmer areas are separated. This standard has been prepared by Working Committee NA ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2025-06

DIN 16262:2025-06

PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges

This document is part of the standards program for accessories for mechanical pressure gauges. It applies to cocks with a male connection on the process side and an adjusting nut connection on the ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2025-05

DIN 7080:2025-05

Pressure resistant circular sight glasses made of thermally toughened borosilicate glass without limitation in the range of low temperature

This document applies to thermally toughened round sight glass panes made of borosilicate glass with a thickness of at least 6,5 mm, which are subjected to permanent or cyclic stress from ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2025-01

DIN 6336:2025-01

Star grips

This document has been prepared by Working Committee NA 121-06-01 AA "Bedienteile" ("Handles") at DIN Standards Committee Tools and Clamping Devices (FWS). This document specifies the principal ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2001-05

DIN 59200:2001-05

Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2002-04

DIN 250:2002-04

Radii

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2002-07

DIN 5520:2002-07

Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1974-04

DIN 107:1974-04

Building construction; identification of right and left side

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2024-11

DIN 53362:2024-11

Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated plastics - Determination of stiffness in bending - Method according to Cantilever

This document specifies a test method for measuring the overhanging length on a specific test specimen under defined conditions and taking this to calculate the bending stiffness as a measured value.

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2024-01

DIN 10955:2024-01

Sensory analysis - Testing of food contact materials and articles (FCM)

Corrected document: Customers who purchased the previous document DIN 10955:2023-10 received free of charge

from 143.40 EUR VAT included

from 134.02 EUR VAT excluded
To selection
Standard [CURRENT] 2024-05

DIN 580:2024-05

Lifting eye bolts

This document has been prepared by DIN Standards Committee Fasteners (FMV), Working Committee NA 067-00-08 AA "Verbindungselemente mit Sonderformen und aus Kunststoff" ("Fasteners with special ...

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 2025-12

DIN 65161:2025-12

Aerospace series - Fasteners in material 1.4534 - Nominal tensile strength 1 250 MPa to 1 550 MPa for temperatures up to 315 °C - Technical specification; Text in German and English

from 143.40 EUR VAT included

from 134.02 EUR VAT excluded
To selection
Standard [CURRENT] 2025-01

DIN 66403:2025-01

Information technology - Automatic identification and data capture techniques - System identifiers

System identifiers are used in connection with barcodes and 2D codes to name and identify a specific data structure. A number of system identifiers have already been defined either in standards or ...

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 28025:2026-04

Nozzles of stainless steel - PN 10 to PN 40

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 28115:2026-04

Carbon steel nozzles - PN 10 to PN 40

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 19302:2026-04

Packaging materials - Paper for general packaging purposes - Requirements and test method

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 19303:2026-04

Paperboard - Terms and grades

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 19260:2026-04

pH measurement - General terms and definitions

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
new

Standard [NEW] 2026-04

DIN 33906:2026-04

Information and documentation - Romanization of the Syriac Alphabet

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2019-04

DIN 4865:2019-04

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 1991-09

DIN 16195:1991-09

Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2017-01

DIN 4426:2017-01

Equipment for building maintenance - Safety requirements for workplaces and accesses - Design and construction

On the basis of the German Occupational Safety and Health Act and the German Regulation on Safety and Health Protection at Construction Sites (Baustellenverordnung - BaustellV), general principles ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2024-12

DIN 53099:2024-12

Metallic coatings - Electrodeposited chromium coatings with chromium(III)-based electrolytes on copper-nickel coatings on plastics - Requirements and test methods

This document specifies requirements for corrosion-resistant decorative-functional chromium coatings electrodeposited from chromium(III)-based electrolytes on nickel and copper-nickel coatings on ...

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded
To selection
Standard [CURRENT] 2025-12

DIN 443:2025-12

Sealing push-in caps

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page