Products for „..."

Refine your search

599,803 search results

Sort by:
  • Aerospace series - Sealing rings - Dimensions, masses

    Standard [CURRENT] 2019-06

    DIN 65219:2019-06

    Aerospace series - Sealing rings - Dimensions, masses

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

    Standard [CURRENT] 2013-09

    DIN 8076:2013-09

    Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

    This standard specifies the requirements and test methods for mechanical fittings intended to join PE pipes of outside diameters of up to 110 mm for piping systems at operating temperature ≤ 40 ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density

    Standard [CURRENT] 2013-10

    DIN 52102:2013-10

    Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density

    This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • First aid material to be carried on motorcycles

    Standard [CURRENT] 2014-01

    DIN 13167:2014-01

    First aid material to be carried on motorcycles

    This standard specifies the first aid kits to be used for motorcycles. The content specified in this document is intended to permit first aid to be properly carried out at the accident site.

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)

    Standard [CURRENT] 2013-10

    DIN 51456:2013-10

    Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)

    This document specifies a method for the determination of the mass fractions of the elements Al (aluminium), As (arsenic), Ba (barium), Be (beryllium), Ca (calcium), Cd (cadmium), Co (cobalt), Cr ...

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Aggregates test methods - Sampling

    Standard [CURRENT] 2013-10

    DIN 52101:2013-10

    Aggregates test methods - Sampling

    This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Test methods for aggregates - Determination of water absorption under pressure

    Standard [CURRENT] 2013-10

    DIN 52009:2013-10

    Test methods for aggregates - Determination of water absorption under pressure

    This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Testing of aggregates - Testing with respect to purity

    Standard [CURRENT] 2013-10

    DIN 52099:2013-10

    Testing of aggregates - Testing with respect to purity

    This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Fasteners - Double end studs

    Standard [CURRENT] 2016-05

    DIN 2509:2016-05

    Fasteners - Double end studs

    This standard specifies requirements for double end studs with a flattened dog point on one thread end. Double end studs are designed primarily to be used for clamping two components together by ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Soil - Testing procedures and testing equipment - Plate load test

    Standard [CURRENT] 2012-04

    DIN 18134:2012-04

    Soil - Testing procedures and testing equipment - Plate load test

    This standard applies in earthworks and foundations as well as road construction. The purpose of the plate load test is to determine load settlement lines and by using these, to assess the ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Soil, testing procedures and testing equipment - Determination of water absorption

    Standard [CURRENT] 2012-04

    DIN 18132:2012-04

    Soil, testing procedures and testing equipment - Determination of water absorption

    This standard applies in earthworks and foundations. Using the testing procedure specified in this standard the water absorption of the fine fractions of a soil is determined. The water absorption ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Stop valves for domestic water supply - Piston type gate valves - PN 10

    Standard [CURRENT] 2012-04

    DIN 3500:2012-04

    Stop valves for domestic water supply - Piston type gate valves - PN 10

    This standard applies for straight pattern piston type gate valves, with or without emptying, with a bonnet perpendicular to the pipe axis installed as stop valves for domestic water supply in ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Master gears for checking cylindrical gears - Gear blanks and gearing

    Standard [CURRENT] 2010-04

    DIN 3970:2010-04

    Master gears for checking cylindrical gears - Gear blanks and gearing

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Information and documentation - Romanization of the Armenian alphabet

    Standard [CURRENT] 2010-01

    DIN 32706:2010-01

    Information and documentation - Romanization of the Armenian alphabet

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Information and documentation - Romanization of the Georgian alphabet

    Standard [CURRENT] 2010-01

    DIN 32707:2010-01

    Information and documentation - Romanization of the Georgian alphabet

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Taper pins with thread ends and constant taper lengths

    Standard [CURRENT] 2012-05

    DIN 258:2012-05

    Taper pins with thread ends and constant taper lengths

    This standard is applicable to unhardened taper pins with metric thread end and constant taper length with nominal diameters from 5 mm to 50 mm. With respect to the previous version, the ...

    Corrected document: Customers who purchased the previous document DIN 258:2011-02 received free of charge

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Lead-acid batteries - Traction batteries 48 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    Standard [CURRENT] 2012-06

    DIN 43531:2012-06

    Lead-acid batteries - Traction batteries 48 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    This standard supplements DIN EN 60254-2. It contains information on dimensions, weight, various circuit types and battery connections of traction batteries 48 V with cells of dimension series L.

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Lead-acid batteries - Traction batteries 24 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    Standard [CURRENT] 2012-06

    DIN 43535:2012-06

    Lead-acid batteries - Traction batteries 24 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    This standard supplements DIN EN 60254-2. It contains information on dimensions, weight, various circuit types and battery connections of traction batteries 24 V with cells of dimension series L.

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Lead-acid batteries - Traction batteries 80 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    Standard [CURRENT] 2012-06

    DIN 43536:2012-06

    Lead-acid batteries - Traction batteries 80 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design

    This standard supplements DIN EN 60254-2. It contains information on dimensions, weight, various circuit types and battery connections of traction batteries 80 V with cells of dimension series L.

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Aluminium alloy delivery coupling type C nominal pressure PN 16

    Standard [CURRENT] 2012-05

    DIN 14330:2012-05

    Aluminium alloy delivery coupling type C nominal pressure PN 16

    Type C delivery couplings according to this standard serve for the connection of semi-rigid delivery hoses according to DIN EN 1947 with an internal diameter DN - 25 mm (fire-fighting hose DIN EN ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Grooved pins, half length grooved with gorge

    Standard [CURRENT] 2012-05

    DIN 1469:2012-05

    Grooved pins, half length grooved with gorge

    This standard applies to grooved pins, half-length grooved with gorge (press-fit fasteners) used for holding retaining rings, retaining washers, springs, etcetera, the pin being seated firmly in a ...

    Corrected document: Customers who purchased the previous document DIN 1469:2011-02 received free of charge

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Round steel link chains for use in continuous conveyors and winning equipment in mining

    Standard [CURRENT] 2012-07

    DIN 22252:2012-07

    Round steel link chains for use in continuous conveyors and winning equipment in mining

    In underground mining, coal occurs during loosening (with shearer loaders, amongst others) as lumpy debris mixed with rock with individual pieces of very different sizes and hardness. For ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements and testing

    Standard [CURRENT] 2012-10

    DIN 3386:2012-10

    Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements and testing

    This standard specifies requirements and tests for gasfilters of a nominal size up to and including DN 250 operated with gases in accordance with DVGW Arbeitsblatt G 260 (with the exception of ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm

    Standard [CURRENT] 2012-05

    DIN 6791:2012-05

    Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm

    This standard applies for semi-tubular pan head rivets with nominal diameters from 1,6 mm to 10 mm. With respect to the previous standard, the values of deduction in mass per mm bore for all ...

    Corrected document: Customers who purchased the previous document DIN 6791:2011-03 received free of charge

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Rescue Systems - Intensive care vehicle - Definitions, requirements, testing

    Standard [CURRENT] 2012-05

    DIN 75076:2012-05

    Rescue Systems - Intensive care vehicle - Definitions, requirements, testing

    This standard is applicable to ground-based intensive care transport and specifies general requirements and tests to supplement DIN EN 1789:2010-11, Type C. DIN 75076 has been prepared by Working ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Ellipsoidal heads

    Standard [CURRENT] 2012-06

    DIN 28013:2012-06

    Ellipsoidal heads

    This standard applies for the dimensions and design of one-piece ellipsoidal heads, with and without a weld seam from non-alloy, low-alloy, or stainless steels, primarily used for process equipment.

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Gas valves for gas installations - Straight pattern conicel plug valves with screw connection - Nozzles with conical connection

    Standard [CURRENT] 2012-06

    DIN 3434:2012-06

    Gas valves for gas installations - Straight pattern conicel plug valves with screw connection - Nozzles with conical connection

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Gas valves for gas installations - Angle pattern ball valves with screw connection - Nozzles with conical connection

    Standard [CURRENT] 2012-06

    DIN 3435:2012-06

    Gas valves for gas installations - Angle pattern ball valves with screw connection - Nozzles with conical connection

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Gas valves for gas installations - Nozzles with conical sealing and gasket

    Standard [CURRENT] 2012-06

    DIN 3436:2012-06

    Gas valves for gas installations - Nozzles with conical sealing and gasket

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Torispherical heads

    Standard [CURRENT] 2012-06

    DIN 28011:2012-06

    Torispherical heads

    This standard applies for the dimensions and design of one-piece torispherical heads, with and without a weld seam from non-alloy, low-alloy, or stainless steels, primarily used for process apparatus.

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Slotted shoulder screws

    Standard [CURRENT] 2012-06

    DIN 927:2012-06

    Slotted shoulder screws

    This standard specifies the characteristics of slotted shoulder screws for thread sizes M1 to M6 for product grades F and A. With regard to DIN 927:2006-08, in addition to editorial modifications ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Steels for welded round link chains and chain components - Technical delivery conditions

    Standard [CURRENT] 2012-07

    DIN 17115:2012-07

    Steels for welded round link chains and chain components - Technical delivery conditions

    Round steel link chains are used for the moving, conveying and securing of large loads. They can be found in extraction plants in mining, as lifting appliances for cranes, during the conveyance of ...

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Dentistry - Dimensions for archwires and attachments for orthodontic appliances

    Standard [CURRENT] 2012-08

    DIN 13996:2012-08

    Dentistry - Dimensions for archwires and attachments for orthodontic appliances

    By the adoption of the International Standards ISO 15841 and ISO 27020 into the German body of standards as DIN EN ISO 15841 as well as DIN EN ISO 27020, terms and definitions, requirements and ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Tools for pressing - Guide pillars, type D

    Standard [CURRENT] 2012-07

    DIN 9833:2012-07

    Tools for pressing - Guide pillars, type D

    The guide pillars specified in standard DIN 9833 are used in large stamping dies for the accurate guiding of both tool halves (upper/lower part of the tool). The outer diameters of the guide ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Tools for pressing - Guide bushes

    Standard [CURRENT] 2014-03

    DIN 9834:2014-03

    Tools for pressing - Guide bushes

    This standard specifies the dimensions and designation for guide bushes that are fixed with holders according to DIN 9832 and used for guide pillars according to DIN 9833. This standard has been ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

    Standard [CURRENT] 2014-08

    DIN 19742:2014-08

    Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

    Phthalates are mainly used as plasticizers for plastics such as PVC and nitrocellulose. For the evaluation of phthalates, a fundamental distinction is made between low-molecular (for example ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Pressure limitation valve, nominal pressure 16

    Standard [CURRENT] 2014-08

    DIN 14380:2014-08

    Pressure limitation valve, nominal pressure 16

    A pressure limitation device according to this standard is an adjustable fire fighting fitting reducing excessive pressures by draining water in order to prevent excessive strain of pressure hoses.

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Information and documentation - Romanization of Japanese

    Standard [CURRENT] 2014-08

    DIN 32708:2014-08

    Information and documentation - Romanization of Japanese

    This standard specifies the romanization of the Japanese Kana syllabary in Latin letters in accordance with the modified Hepburn-system. This romanization shall be preferred due to its ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Fixed guard rails on deck of sea-going passenger ships

    Standard [CURRENT] 2014-09

    DIN 81706:2014-09

    Fixed guard rails on deck of sea-going passenger ships

    This standard describes guard rails on deck of sea-going passenger ships in the passenger area. It contains safety specifications, specifies the dimensions, materials and the surface protection ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

    Standard [CURRENT] 2014-08

    DIN 21773:2014-08

    Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness

    The tooth thickness and its deviations are fundamental variables for the determination of the backlash of the wheel pair. DIN 3960:1987, 3.8 "Test dimensions for the tooth thickness" defined ...

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Protrusions on turned parts - Indications on drawings

    Standard [CURRENT] 2014-06

    DIN 6785:2014-06

    Protrusions on turned parts - Indications on drawings

    This standard shall be used for technical documents. It specifies terms and language-independent indications on drawings for protrusions with indeterminate form. With respect to DIN 6785:1991-11 ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Crank handles, offset type

    Standard [CURRENT] 2014-06

    DIN 468:2014-06

    Crank handles, offset type

    These two German standards specify product requirements for offset-type and straight-pattern crank handles. These crank handles are used for manual operation and adjustment in mechanical ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Crank handles, straight pattern

    Standard [CURRENT] 2014-06

    DIN 469:2014-06

    Crank handles, straight pattern

    These two German standards specify product requirements for offset-type and straight-pattern crank handles. These crank handles are used for manual operation and adjustment in mechanical ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Testing of bitumen and polymer bitumen sheets

    Standard [CURRENT] 2014-06

    DIN 52123:2014-06

    Testing of bitumen and polymer bitumen sheets

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions

    Standard [CURRENT] 2014-08

    DIN 18101:2014-08

    Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions

    This standard applies to single, rebated and unrebated door leaves with or without top blind/panel in steel door frames according to DIN 18111-1, -2 and -3 and in wooden door frames according to ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Testing of paper and board - Determination of the bending stiffness by the beam method

    Standard [CURRENT] 2014-08

    DIN 53121:2014-08

    Testing of paper and board - Determination of the bending stiffness by the beam method

    This document has been prepared by NA 074-02-03 AA "Physikalisch-technische Prüfverfahren für Papier, Pappe und Faserstoff" ("Physical-technological test methods for paper and board"). This ...

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Locks for waterways for inland navigation - Principles for dimensioning and equipment

    Standard [CURRENT] 2014-06

    DIN 19703:2014-06

    Locks for waterways for inland navigation - Principles for dimensioning and equipment

    The standard specifies requirements for dimensioning, equipment, construction and overall arrangement of massive locks for waterway for inland navigation to be newly erected. The standard shall be ...

    Accessibility

    from 112.80 EUR VAT included

    from 105.42 EUR VAT excluded

    To selection
  • Sands and gravels for well construction - Requirements and testing

    Standard [CURRENT] 2014-07

    DIN 4924:2014-07

    Sands and gravels for well construction - Requirements and testing

    This standard is an updated new edition. The requirement and tests for sands and gravels for well construction are specified. The sands and gravels are introduced as filter layers during ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

    Standard [CURRENT] 2014-11

    DIN 8130:2014-11

    Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

    This standard is the German translation of Recommendation OIML R 107-1:2007 "Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and ...

    Accessibility

    from 192.10 EUR VAT included

    from 179.53 EUR VAT excluded

    To selection
  • Determination of iodine colour number

    Standard [CURRENT] 2014-09

    DIN 6162:2014-09

    Determination of iodine colour number

    This standard specifies a method for determining the colour strength of clear liquids such as solvents, plasticizers, resins, resin solutions, oils and fatty acids with a colour similar to the ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page