Products for „..."

Refine your search

597,662 search results

Sort by:
  • Swimming equipment - Dividing ropes for use in swimming baths - requirements and testing

    Standard [CURRENT] 2014-10

    DIN 7939:2014-10

    Swimming equipment - Dividing ropes for use in swimming baths - requirements and testing

    This standard exclusively applies for dividing ropes across the water surface with the help of which non-swimmer areas are separated. This standard has been prepared by Working Committee NA ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Testing of solid fuels - Determination of chlorine content

    Standard [CURRENT] 2011-11

    DIN 51727:2011-11

    Testing of solid fuels - Determination of chlorine content

    The standard describes a method for determining the chlorine content in solid fuels. Solid fuels in terms of this standard are standard fuels such as hard coals, hard coal briquettes, hard coal ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Stairs and guard rails for engine rooms and boiler rooms in seagoing ships - Stairs

    Standard [CURRENT] 2011-12

    DIN 83206:2011-12

    Stairs and guard rails for engine rooms and boiler rooms in seagoing ships - Stairs

    This standard specifies the dimensions, materials and designs for stairs used in engine and boiler rooms. Furthermore, it states which stair length/number of steps is suitable for which height ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Handrails and footrails on masts, posts and walls of ships

    Standard [CURRENT] 2011-12

    DIN 83209:2011-12

    Handrails and footrails on masts, posts and walls of ships

    This standard specifies the dimensions, materials and designs for handrails and footrails used on masts, posts and walls of ships. Handrails and footrails on walls of ships serve as escape routes ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Method for the detection of salmonella

    Standard [CURRENT] 2013-05

    DIN 10135:2013-05

    Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Method for the detection of salmonella

    This standard specifies a test method for detection of salmonella in food and animal feeding stuffs and isolates obtained from them, using the polymerase chain reaction including real-time PCR.

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Pigments and extenders - Determination of matter soluble in water - Hexavalent chromium content

    Standard [CURRENT] 2014-05

    DIN 53780:2014-05

    Pigments and extenders - Determination of matter soluble in water - Hexavalent chromium content

    This standard specifies a method for the determination of the water soluble hexavalent chromium content in pigments and extenders. Method A is a photometric method using 1,5-diphenylcarbazid and ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Clamping plates for the suspension of pipes on I and IPB beams, with CD-ROM

    Standard [CURRENT] 2014-06

    DIN 3568:2014-06

    Clamping plates for the suspension of pipes on I and IPB beams, with CD-ROM

    This standard specifies dimensions for steel clamping plates used in steel construction for mounting holding plates on beams. Any mounting situation for the use of these clamping plates can be ...

    Accessibility

    Product with additional digital content.
    EXCEL
    Additional digitale content will be provided based on format and purchase option. Please note any information in the document.

    from 105.20 EUR VAT included

    from 98.32 EUR VAT excluded

    To selection
  • Round steel link chains - Round steel link chains, pitch 2,8d, for chain conveyors, grade 3, quenched and tempered

    Standard [CURRENT] 2015-06

    DIN 766:2015-06

    Round steel link chains - Round steel link chains, pitch 2,8d, for chain conveyors, grade 3, quenched and tempered

    About the history of DIN 766: DIN 766:1954 covered a variety of different chain types, such as tested, calibrated and tested, non-calibrated round steel link chains of grades 2 and 3 as well as ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Sieving media - Round monofilament yarns

    Standard [CURRENT] 2015-08

    DIN 4196:2015-08

    Sieving media - Round monofilament yarns

    This standard applies to round monofilament yarns, including synthetic wires of synthetic polymers of nominal diameters from 5 mm to 0,028 mm, used for the manufacture of textile sieve trays.

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Packaging test - Determination of the high pressure coefficient of friction

    Standard [CURRENT] 2015-12

    DIN 55426:2015-12

    Packaging test - Determination of the high pressure coefficient of friction

    This document specifies the requirements for the test to assess the friction behaviour of foils under pressure conditions, such as those which can occur on the format shoulder of tubular bag machines.

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Haemostaseology - Deficient plasma - Requirements, preparation; Text in German and English

    Standard [CURRENT] 2020-04

    DIN 58903:2020-04

    Haemostaseology - Deficient plasma - Requirements, preparation; Text in German and English

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method

    Standard [CURRENT] 2020-05

    DIN 50996:2020-05

    Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method

    Accessibility

    from 105.20 EUR VAT included

    from 98.32 EUR VAT excluded

    To selection
  • Pedologic site assessment - Designation, classification and deduction of soil parameters (normative and nominal scaling)

    Standard [CURRENT] 2020-11

    DIN 4220:2020-11

    Pedologic site assessment - Designation, classification and deduction of soil parameters (normative and nominal scaling)

    Accessibility

    from 173.40 EUR VAT included

    from 162.06 EUR VAT excluded

    To selection
  • Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C., D.C. and rapid-response line on emergency vehicles

    Standard [CURRENT] 2020-11

    DIN 14680:2020-11

    Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C., D.C. and rapid-response line on emergency vehicles

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Couplings for fuelling railway and truck containers - Reducer adapting 5 1/2 inch to nipples G 3 or G 4, nominal size 80 or 100

    Standard [CURRENT] 2020-11

    DIN 3799:2020-11

    Couplings for fuelling railway and truck containers - Reducer adapting 5 1/2 inch to nipples G 3 or G 4, nominal size 80 or 100

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials

    Standard [CURRENT] 2020-11

    DIN 16463:2020-11

    Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Aerospace series - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English

    Standard [CURRENT] 2021-07

    DIN 65339:2021-07

    Aerospace series - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Medical X-ray equipment up to 300 kV - Rules of construction for structural radiation protection

    Standard [CURRENT] 2021-06

    DIN 6812:2021-06

    Medical X-ray equipment up to 300 kV - Rules of construction for structural radiation protection

    Accessibility

    from 124.80 EUR VAT included

    from 116.64 EUR VAT excluded

    To selection
  • Plastic sheets - Testing

    Standard [CURRENT] 2017-08

    DIN 16726:2017-08

    Plastic sheets - Testing

    This document specifies the methods to be used to test plastic sheeting and film. With the revision the standard has been supplemented by a procedure for testing the behavior of the joint seam in ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Thermal insulation for closed livestock buildings - Thermal insulation and ventilation - Principles for planning and design for closed ventilated livestock buildings

    Standard [CURRENT] 2017-08

    DIN 18910:2017-08

    Thermal insulation for closed livestock buildings - Thermal insulation and ventilation - Principles for planning and design for closed ventilated livestock buildings

    This standard applies to the planning of closed, thermally insulated cattle, pig, poultry and horse stables in which the air exchange is preferably carried out by fans (forced ventilation). Based ...

    Accessibility

    from 124.80 EUR VAT included

    from 116.64 EUR VAT excluded

    To selection
  • Testing of metallic materials - Metallographic micrographs - Picture scales

    Standard [CURRENT] 2017-10

    DIN 50600:2017-10

    Testing of metallic materials - Metallographic micrographs - Picture scales

    This standard specifies how to select the magnification when taking micrographs under the microscope and how to indicate this magnification when storing and using these images in publications. It ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Entertainment technology - Load assumptions in stages and associated areas - Imposed loads

    Standard [CURRENT] 2017-10

    DIN 56955:2017-10

    Entertainment technology - Load assumptions in stages and associated areas - Imposed loads

    This standard applies to load assumptions, in particular permanent and variable loads and their combinations, for installations (technical equipment) in stages and their ancillary areas ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Comparative testing - Technical principles

    Standard [CURRENT] 2017-08

    DIN 66054:2017-08

    Comparative testing - Technical principles

    The reliability and validity of a product test depend on its design and execution. This standard defines the principles for the design and execution of comparative product tests in order to ensure ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Analysis of foodstuffs - Enumeration of microorganisms by means of impedance-method - Determination of aerobic mesophile bacterial count

    Standard [CURRENT] 2018-02

    DIN 10122:2018-02

    Analysis of foodstuffs - Enumeration of microorganisms by means of impedance-method - Determination of aerobic mesophile bacterial count

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Strainer

    Standard [CURRENT] 2018-02

    DIN 14362:2018-02

    Strainer

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Ventilator flaps, weathertight

    Standard [CURRENT] 2018-02

    DIN 83409:2018-02

    Ventilator flaps, weathertight

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Inserts for ventilator flaps - Made of steel and aluminium

    Standard [CURRENT] 2018-02

    DIN 83410:2018-02

    Inserts for ventilator flaps - Made of steel and aluminium

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Non-destructive testing - Thermographic testing - Eddy-current excited thermography

    Standard [CURRENT] 2018-02

    DIN 54183:2018-02

    Non-destructive testing - Thermographic testing - Eddy-current excited thermography

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Rope hatches - Nominal size 300

    Standard [CURRENT] 2018-02

    DIN 83417:2018-02

    Rope hatches - Nominal size 300

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Guide pulley for rope hatches

    Standard [CURRENT] 2018-02

    DIN 83418:2018-02

    Guide pulley for rope hatches

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Dogs for heavy-duty doors on ships and for hatch covers

    Standard [CURRENT] 2018-02

    DIN 83104:2018-02

    Dogs for heavy-duty doors on ships and for hatch covers

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Elastomer gaskets for covers

    Standard [CURRENT] 2018-02

    DIN 83419:2018-02

    Elastomer gaskets for covers

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels in a wet hyperbaric environment - Classification

    Standard [CURRENT] 2018-03

    DIN 2302:2018-03

    Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels in a wet hyperbaric environment - Classification

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Personal fall protection equipment - Rope clamps and webbing clamps - Safety requirements and test methods

    Standard [CURRENT] 2018-03

    DIN 19428:2018-03

    Personal fall protection equipment - Rope clamps and webbing clamps - Safety requirements and test methods

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Ophthalmic optics and instruments - Anomaloscopes for the diagnosis of congenital defects of red-green-colour vision and aquired disorders - Fundamental requirements; Text in German and English

    Standard [CURRENT] 2019-06

    DIN 6160:2019-06

    Ophthalmic optics and instruments - Anomaloscopes for the diagnosis of congenital defects of red-green-colour vision and aquired disorders - Fundamental requirements; Text in German and English

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Food hygiene - Ventilation equipment for sales arrangements of foodstuffs - Requirements, testing

    Standard [CURRENT] 2019-12

    DIN 10505:2019-12

    Food hygiene - Ventilation equipment for sales arrangements of foodstuffs - Requirements, testing

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Industrial steel storage drawer cabinets - Design, functional and safety requirements, testing and evaluation

    Standard [CURRENT] 2019-12

    DIN 5054:2019-12

    Industrial steel storage drawer cabinets - Design, functional and safety requirements, testing and evaluation

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Design rules for stamped steel parts

    Standard [CURRENT] 2011-10

    DIN 6932:2011-10

    Design rules for stamped steel parts

    This standard is the technical revision of the standard which has been published in 2010-01. This revision primarily includes the update of the normative references. This standard applies to bent ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Cold bending of flat rolled steel

    Standard [CURRENT] 2011-10

    DIN 6935:2011-10

    Cold bending of flat rolled steel

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Burr heights on stamped parts

    Standard [CURRENT] 2011-10

    DIN 9830:2011-10

    Burr heights on stamped parts

    This standard is the technical revision of the standard which has been published in 2010-01. The clauses "Normative references" and "Terms and definitions" as well as a new figure have been ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Soil quality - Determination of the site specific potential for translocation of non-sorbable substances

    Standard [CURRENT] 2011-10

    DIN 19732:2011-10

    Soil quality - Determination of the site specific potential for translocation of non-sorbable substances

    The location factors soil and climate influence, in addition to the running, the quality and quantity of the groundwater to various degrees. With regard to preventive groundwater protection ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Machine reamers for Morse tapers

    Standard [CURRENT] 2007-05

    DIN 1895:2007-05

    Machine reamers for Morse tapers

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Hexagonal nuts - Rounded acme thread

    Standard [CURRENT] 2007-06

    DIN 30386:2007-06

    Hexagonal nuts - Rounded acme thread

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars

    Standard [CURRENT] 2007-06

    DIN 30389:2007-06

    Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Mechanical filters for drinking water installations - Application of mechanical filters according to DIN EN 13443-1

    Standard [CURRENT] 2007-07

    DIN 19628:2007-07

    Mechanical filters for drinking water installations - Application of mechanical filters according to DIN EN 13443-1

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Shouldered nuts - Metric fine thread, rounded acme thread

    Standard [CURRENT] 2007-06

    DIN 30387:2007-06

    Shouldered nuts - Metric fine thread, rounded acme thread

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Pigments and extenders - Dispersion of pigments in powder coatings and their colorimetric evaluation after application

    Standard [CURRENT] 2007-06

    DIN 55607:2007-06

    Pigments and extenders - Dispersion of pigments in powder coatings and their colorimetric evaluation after application

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Horizontal pressure vessels 0,63 m³ up to 25 m³ - Dimensions

    Standard [CURRENT] 2007-07

    DIN 28020:2007-07

    Horizontal pressure vessels 0,63 m³ up to 25 m³ - Dimensions

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions

    Standard [CURRENT] 2007-09

    DIN 49073:2007-09

    Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions

    This document has been corrected by

    Accessibility

    from 105.20 EUR VAT included

    from 98.32 EUR VAT excluded

    To selection
  • Screw driver for screws with internal serration - Screw driver points, gauges and test specimens for torque testing

    Standard [CURRENT] 2007-07

    DIN 2325:2007-07

    Screw driver for screws with internal serration - Screw driver points, gauges and test specimens for torque testing

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page