Produktsuche

Products for „..."

599,785 search results

Standard [CURRENT] 1995-06

DIN 10468:1995-06

Determination of the phosphatide value of milk and milk products

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1995-11

DIN 10469:1995-11

Detection of the animal species in milk and milk products with isoelectrical focusing

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 1996-06

DIN 10472:1996-06

Determination of casein and whey protein contents of milk and milk products - Electrophoretic method

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 1997-10

DIN 10471:1997-10

Determination of d-gluconic acid (d-gluconate) content of milk and milk products - Enzymatic method

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2022-07

DIN 14220:2022-07

Fire wells

This document has been corrected by

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2023-07

DIN 14462:2023-07

Planning, installation, operation and maintenance of fire hose systems, systems with fire hydrants and dry risers

Accessibility

from 173.40 EUR VAT included

from 162.06 EUR VAT excluded
To selection
Standard [CURRENT] 2019-06

DIN 14210:2019-06

Artificially constructed water ponds for fire fighting

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2020-11

DIN 14925:2020-11

Fire-fighting purposes - Locking device

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2022-07

DIN 14244:2022-07

Water suction connection for fire fighting - Under and above ground

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2025-04

DIN 14467:2025-04

Separation station for fire extinguishing and fire protection systems with stagnant water - Requirements and testing

This document describes requirements and test procedures for separation stations for fire extinguishing and fire protection systems with stagnant water (hereinafter referred to as separation ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
new

Standard [NEW] 2026-08

DIN 14230:2026-08

Underground water-tanks for fire fighting

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2009-12

DIN 10:2009-12

Squares of parallel shanks for rotating tools

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2010-04

DIN 20361:2010-04

Rock drilling - Chuck bushings - Connecting dimensions, material, design

This standard specifies the corresponding dimensions between shanks complying with DIN 20377 and chuck bushings of drill hammers for rock drilling. In accordance with the new specifications of DIN ...

Accessibility

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2010-04

DIN 20367:2010-04

Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1987-09

DIN 40434:1987-09

Circular screwing dies for steel conduit thread, Pg 7 to Pg 48

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1988-01

DIN 20374:1988-01

Pick hammers; gauges for picks

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1988-01

DIN 20375:1988-01

Pick hammers; round picks without shank

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1988-01

DIN 20376:1988-01

Pick hammers; round picks with shank

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1988-05

DIN 20372:1988-05

Rock drilling; water tube; connecting dimensions, material, finish

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2012-11

DIN 20316:2012-11

Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design

This standard is applicable for threads for drilling technology with thin-walled drill pipes, particularly for wireline corebarrels. In the standard, along with the general design and thread ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1990-06

DIN 20314:1990-06

Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 1990-10

DIN 20378:1990-10

Drilling hammers; taper gauges for tapered connections of drill rods and bits

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 352:2016-01

Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68

This standard applies to sets of 3 taps consisting of a first taper tap (V), second tap (M) and bottoming tap (F), and to short machine screwing taps intended for the production of coarse pitch ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-02

DIN 357:2016-02

Machine nut taps for coarse pitch metric ISO-threads M3 to M68

This standard applies to machine nut taps intended for the production of nuts with coarse pitch metric ISO-threads according to DIN 13-1. The standard has been prepared in Working Committee NA ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 371:2016-01

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25

This standard applies to machine screwing taps with reinforced shank intended for the production of coarse pitch metric ISO-threads according to DIN 13-1 and fine pitch metric ISO-threads ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-01

DIN 374:2016-01

Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4

This standard applies to machine screwing taps with stepped shank (overflow taps), which are intended for the production of fine pitch metric ISO-threads according to DIN 13-2 to DIN 13-9. The ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-02

DIN 376:2016-02

Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68

This standard applies to machine screwing taps with reinforced shank intended for the production of coarse pitch metric ISO-threads according to DIN 13-1. The standard has been prepared in Working ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2020-01

DIN 6590:2020-01

Indexable hardmetall (carbide) inserts with wiper edges, without fixation hole

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 1999-01

DIN 20301:1999-01

Rock drilling operations - Terminology, units, and symbols for use in formulae

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2011-07

DIN 5157:2011-07

Sets of taps - Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4

The standard applies to inserts in sets of 2 taps consisting of first tap and bottoming tap used for producing internal pipe threads where pressure-tight joints are not made on the threads (symbol ...

Corrected document: Customers who purchased the previous document DIN 5157:2008-11 received free of charge

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1989-09

DIN 20369:1989-09

Pick hammers; flat- and shearpick without and with shank

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2013-09

DIN 6597:2013-09

Tool holders for external and internal turning with hollow taper shank for indexable inserts - Designation

This standard has been prepared by the Standards Committee Tools and Clamping Devices (FWS), Working Committee NA 121-01-12 AA "Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2013-09

DIN 6598:2013-09

Tool holders for external and internal turning with hollow taper shank for indexable inserts - General survey, Correlation of dimensions

This standard has been prepared by the Standards Committee Tools and Clamping Devices (FWS), Working Committee NA 121-01-12 AA "Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2014-02

DIN 20317:2014-02

Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design

This standard specifies dimensions and designations of round and rope thread connections to be used in percussive drilling technology of larger dimensions in mining which are not included in ISO ...

Corrected document: Customers who purchased the previous document DIN 20317:2012-11 received free of charge

Accessibility

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2015-08

DIN 20351:2015-08

Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design

In underground hardcoal mining, there is a large daily amount of drilling for blast holes and rock bolting while these tasks have grown increasingly more important in terms of the productivity of ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2015-09

DIN 2181:2015-09

Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4

This standard applies to sets of 2 taps consisting of pre-cutters (V) and finish cutters (F), which are intended for the production of metric ISO fine threads according to DIN 13-2 to DIN 13-9.

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2000-05

DIN 377:2000-05

Extensions for tools with driving square according to DIN 10

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2016-03

DIN 20352:2016-03

Rock drilling - Sqare driver connection for rotary drilling - Dimensions, design

In underground coal mining drilling operations are carried out on a large scale every day, primarily for blasting and anchor hole drilling, and in recent years these operations have become ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2016-03

DIN 20353:2016-03

Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design

In underground coal mining drilling operations are carried out on a large scale every day, primarily for blasting and anchor hole drilling, and in recent years these operations have become ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2020-11

DIN 382:2020-11

Hexagonal die-nuts - Dimensions, designation, material, type and labelling for hexagonal high-speed steel dies

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2002-11

DIN 20311:2002-11

Drill tubes with diameters exceeding 100 mm for large hole boring in mining

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2003-07

DIN 336:2003-07

Diameters of drills for minor diameters of tapped threads

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2003-07

DIN 40435:2003-07

Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2004-07

DIN 8024:2004-07

Tool holders for internal turning, with cylindrical shank, for indexable inserts - Structure of designation

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2015-10

DIN 4213:2015-10

Application in structures of prefabricated components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

This standard applies to the calculation, dimensioning and structural design of structures which partially or completely consist of prefabricated components of lightweight aggregate according to ...

Accessibility

This document has been modified by: DIN 4213/A1:2022-08

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded
To selection
Standard [CURRENT] 2021-11

DIN 10342:2021-11

Milk and milk products - Determination of fat content of milk and milk products by the Weibull-Berntrop gravimetric method

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2007-12

DIN 10326:2007-12

Milk products and ice cream - Determination of sucrose and glucose content - Enzymatic method

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 1988-02

DIN 10457:1988-02

Apparatus for dairy analysis; sample bottles of plastic for milk

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 1988-10

DIN 10348:1988-10

Determination of the total solids content of milk and cream; reference method

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2011-07

DIN 10470:2011-07

Milk and milk products - Determination of whey protein content and casein content in total protein - Derivative spectroscopic method

This standard specifies a derivative spectroscopic method for determination of whey protein content and casein content in total protein. It is applicable for milk, milk powder and cream cheese. To ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page