Produktsuche

Products for „..."

591,560 search results

Standard [CURRENT] 2008-11

DIN 19655:2008-11

Irrigation - Tasks, fundamental principles, planning and methods

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 1991-07

DIN 18462:1991-07

Pipe bends for rainwater pipes of circular cross-section; testing

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded
To selection
Standard [CURRENT] 2014-06

DIN 52123:2014-06

Testing of bitumen and polymer bitumen sheets

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2014-11

DIN 52118:2014-11

Cardboard of dry felt - Test methods

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2014-11

DIN 52117:2014-11

Cardboard of dry felt - Definition, designation, requirements

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2015-12

DIN 52461:2015-12

Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products

This standard specifies the test method for assessing the rain resistance of freshly applied aqueous dispersion-based sealants. The committee responsible for this standard is NA 005-02-16 AA ...

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2016-08

DIN 68791:2016-08

Large area shuttering panels of core plywood for concrete and reinforced concrete

This standard applies to large area shuttering panels of core plywood with or without surface treatment. Compared to DIN 68791:1979-03, European standards for the determination of dimensions ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2016-08

DIN 68792:2016-08

Large area shuttering panels of veneer plywood for concrete and reinforced concrete

This standard applies to large area shuttering panels made of veneer plywood with or without surface treatment. Compared to DIN 68792:1979-03, European standards for the determination of ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2017-03

DIN 278:2017-03

Hollow clay tiles (Hourdis) - Statically loaded

This standard applies to hollow clay tiles (Hourdis) used as load-bearing intermediate components between floor beams made of steel, reinforced concrete, prestressed concrete or wood.

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2017-07

DIN 16878:2017-07

Pipes and fittings of polypropylene (PP) for buried cable ducting - Dimensions and technical delivery conditions

This standard applies to buried pipes and fittings made of polypropylene (PP) that are used as cable ducting. It is also applicable for installation in bridge structures. This standard has been ...

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 4118:2018-12

Headgears and winding towers for mines - Design loads, calculating- and construction principles

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2018-12

DIN 1221:2018-12

Dirt trap for manhole covers

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded
To selection
Standard [CURRENT] 2020-04

DIN 45682:2020-04

Acoustics - Thematic maps in the field of sound immission protection

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded
To selection
Standard [CURRENT] 2022-07

DIN 14244:2022-07

Water suction connection for fire fighting - Under and above ground

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2021-04

DIN 53733:2021-04

Testing of plastics - Size reduction of plastic products for test purposes

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2022-10

DIN 51220:2022-10

Materials testing machines - General requirements, calibration and verification of materials testing machines

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2022-12

DIN 53350:2022-12

Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2023-10

DIN 16842:2023-10

Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2023-10

DIN 16834:2023-10

Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions; Text in German and English

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2024-03

DIN 53508:2024-03

Testing of rubber - Accelerated ageing

This document defines five methods for the accelerated ageing of rubber: - methods A to D: storage at elevated temperatures; - method E: storage in oxygen at an elevated pressure. The test methods ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2024-08

DIN 53377:2024-08

Testing of plastic films - Determination of dimensional stability

This document specifies a method to determine dimensional changes in plastic films which may be the result of various treatments, an example being the action of heat. The committee responsible for ...

Corrected document: Customers who purchased the previous document DIN 53377:2021-11 received free of charge

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2020-11

DIN 2340:2020-11

Abbreviated forms for terms and names

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2021-12

DIN 1653:2021-12

Surface finish of steel wires - Designations and abbreviations thereof

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2022-01

DIN 18545:2022-01

Sealing of glazing with sealants - Requirements for rebates and glazing systems

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2022-02

DIN 13164:2022-02

First aid material - First aid box B

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2022-09

DIN 18007:2022-09

Demolition works - Concepts, procedures, fields of application

from 130.90 EUR VAT included

from 122.34 EUR VAT excluded
To selection
Standard [CURRENT] 2022-07

DIN 2342:2022-07

Terminology science and terminology work - Vocabulary

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2022-10

DIN 18126:2022-10

Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 2023-10

DIN 17860:2023-10

Strips and sheets of titanium and titanium alloys - Technical delivery conditions

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2020-02

DIN 909:2020-02

Hexagon head pipe plugs - Conical thread

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2020-12

DIN 17742:2020-12

Wrought nickel alloys with chromium - Chemical composition

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2023-09

DIN 18301:2023-09

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Drilling works

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2023-09

DIN 18340:2023-09

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Dry lining and partitioning works

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2020-12

DIN 14334:2020-12

Solid couplings Storz System PN 16 for delivery and suction

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded
To selection
Standard [CURRENT] 2021-04

DIN 28121:2021-04

Circular sight glass fitting with round sight glass plate in force shunt

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2021-04

DIN 28120:2021-04

Circular sight glass fittings with sight glasses in main power connection

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2024-02

DIN 28040:2024-02

Flange joints for process vessels - Flat gaskets

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded
To selection
Standard [CURRENT] 2010-11

DIN 26281:2010-11

Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings (ISO/TS 16281:2008 + Cor. 1:2009)

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-08 "Tragzahlen und Lebensdauer" ("Load ratings and life"). This standard ...

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded
To selection
Standard [CURRENT] 2011-02

DIN 101:2011-02

Rivets - Technical specifications

This document has been prepared by the Fasteners Standards Committee (FMV), Working Committee NA 067-00-09 AA "Verbindungselemente ohne Gewinde" ("Fasteners without thread"). This standard ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2011-03

DIN 661:2011-03

Countersunk head rivets - Nominal diameters 1 mm to 8 mm

This document has been prepared by the Fasteners Standards Committee (FMV), Working Committee NA 067-00-09 AA "Verbindungselemente ohne Gewinde" ("Fasteners without thread"). This standard applies ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2011-04

DIN 5406:2011-04

Rolling bearings - Lockwashers; Safety plate, Lockclip

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Corrected document: Customers who purchased the previous document DIN 5406:2009-05 received free of charge

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded
To selection
Standard [CURRENT] 2011-06

DIN 5417:2011-06

Securing parts for rolling bearings - Snap rings for bearings with ring groove

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2013-09

DIN 28034:2013-09

Flange joints for process vessels - Weld-neck flanges for pressurized vessels

This standard specifies dimensions and designations for weld-neck flanges for pressure vessels. This document has been prepared by Working Committee NA 012-00-01 AA "Anlagenteile" ("Process ...

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded
To selection
Standard [CURRENT] 2013-09

DIN 28031:2013-09

Flange joints for process vessels - Weld flanges for unpressurized process vessels

This standard specifies dimensions, types and designations of weld flanges for unpressurized process vessels. This document has been prepared by Working Committee NA 012-00-01 AA "Anlagenteile" ...

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 2013-10

DIN 6789:2013-10

Systematic arrangement of documents - Protection against falsification and quality criteria for the release of digital product data

Technical documents are integrated into a complex environment. This relates both to the processes they result from as well as to their own, often complex, structure and the framework conditions ...

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2019-12

DIN 9925:2019-12

Round wire snap rings for shafts

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2019-12

DIN 9926:2019-12

Round wire snap rings for bores

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection
Standard [CURRENT] 2020-01

DIN 74:2020-01

Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded
To selection
Standard [CURRENT] 1993-02

DIN 5418:1993-02

Rolling bearings; dimensions for mounting

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded
To selection
Standard [CURRENT] 2006-11

DIN 6770:2006-11

Technical product documentation - Identification of characteristics on technical drawings

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded
To selection

Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page