Produktsuche

Cap srews for mounting holes and glands according to DIN 89280; Text in German and English

Standard [CURRENT] 2007-09

DIN 89284:2007-09

Cap srews for mounting holes and glands according to DIN 89280; Text in German and English

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Aerospace - Bolts, screws and nuts - Allocation of materials and surface treatments, recommended selection; Text in German and English

Standard [CURRENT] 2011-06

DIN 65533:2011-06

Aerospace - Bolts, screws and nuts - Allocation of materials and surface treatments, recommended selection; Text in German and English

This standard shall be used when defining the design data of bolts/screws and nuts intended for aerospace equipment to guarantee their appropriate allocation in terms of materials and surface ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Bright key steel - Dimensions, tolerances, mass

Standard [CURRENT] 2011-06

DIN 6880:2011-06

Bright key steel - Dimensions, tolerances, mass

This standard applies for bright key steel (bright steel for the manufacturing of keys and parallel keys) in bars with square, rectangular or flat rectangular cross-sections and is an important ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Analysis of honey - Guideline for sampling

Standard [CURRENT] 2011-06

DIN 10742:2011-06

Analysis of honey - Guideline for sampling

This standard deals with aspects regarding the sampling of honey. It specifies procedures which shall be taken into account during sampling; therewith it is ensured that a sufficient ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2021-02

DIN 5381:2021-02

Identification colours

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve

Standard [CURRENT] 2011-06

DIN 737:2011-06

Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve

Standard [CURRENT] 2011-06

DIN 736:2011-06

Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore

Standard [CURRENT] 2011-06

DIN 738:2011-06

Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Analysis of tobacco and tobacco products - Determination of nicotine content - Gaschromatographic method

Standard [CURRENT] 2011-05

DIN 10373:2011-05

Analysis of tobacco and tobacco products - Determination of nicotine content - Gaschromatographic method

DIN 10373 specifies a method for the gaschromatographic determination of the nicotine content in tobacco and tobacco products. The ground tobacco samples are extracted under strong alkaline ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore

Standard [CURRENT] 2011-06

DIN 739:2011-06

Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Securing parts for rolling bearings - Snap rings for bearings with ring groove

Standard [CURRENT] 2011-06

DIN 5417:2011-06

Securing parts for rolling bearings - Snap rings for bearings with ring groove

This standard has been prepared by the Rolling Bearings and Plain Bearings Standards Committee, Working Committee NA 118-01-02 AA "Kugellager und Spannlager einschließlich Teile, allgemeines ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Geometrical values of drains and sewers for hydraulic design for water and waste water engineering

Standard [CURRENT] 2011-06

DIN 4263:2011-06

Geometrical values of drains and sewers for hydraulic design for water and waste water engineering

This document applies for shapes, dimensions and geometric values of sewers and drains necessary for hydraulic calculation. It is used in water supply, wastewater engineering and general water ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2011-05

DIN 13232:2011-05

Emergency equipment

This standard applies for emergency equipment in emergency medicine. The purpose of these specifications is to provide the personnel working in emergency medicine, especially emergency doctors ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Test methods for cyclic load change internal pressure tests for the renovation and repair of sewage pressure pipe systems

Standard [CURRENT] 2025-12

DIN 3603:2025-12

Test methods for cyclic load change internal pressure tests for the renovation and repair of sewage pressure pipe systems

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Standard [CURRENT] 2015-02

Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English; Inactive for new design

This standard specifies the characteristics of anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel used together with screws and bolts of 1 100 ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2015-03

DIN 23330:2015-03

Safety marking for mines

The safety marking using safety symbols for mines provides people with (mostly) language-neutral information on existing hazards, actions to be avoided or required behaviour at corresponding ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Respiratory protective devices - Full face masks connected with fire fighters head protection for use as a part of a respiratory protective device - Requirements and tests

Standard [CURRENT] 2014-11

DIN 58610:2014-11

Respiratory protective devices - Full face masks connected with fire fighters head protection for use as a part of a respiratory protective device - Requirements and tests

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade

Standard [CURRENT] 2014-12

DIN 58600:2014-12

Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design

Standard [CURRENT] 2015-08

DIN 20351:2015-08

Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design

In underground hardcoal mining, there is a large daily amount of drilling for blast holes and rock bolting while these tasks have grown increasingly more important in terms of the productivity of ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Window handles - Clickable and lockable window handles

Standard [CURRENT] 2015-02

DIN 18267:2015-02

Window handles - Clickable and lockable window handles

This standard specifies dimensions and applies to all types of window handles for tilt & turn, tilt-first and turn only hardware for use on windows and balcony doors made of wood, aluminium ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Geometrical product specifications (GPS) - Gauges for ISO metric screw threads - Dirt grooves

Standard [CURRENT] 2015-03

DIN 2278:2015-03

Geometrical product specifications (GPS) - Gauges for ISO metric screw threads - Dirt grooves

This standard specifies the design of dirt grooves on gauges for ISO metric screw threads. There are cases where usual cleaning of the threads under test is insufficient. When screwing in the ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies - Dimensions, requirements, marking

Standard [CURRENT] 2015-04

DIN 22121:2015-04

Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies - Dimensions, requirements, marking

Conveyor belts are used in mining applications for the continuous transport of large amounts of loose bulk materials, sometimes over long distances. Due to the mainly automatic and unmanned ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Suspended-monorail transport systems for mining - Permissible loads for suspensions and their abnutments and railprofile I 140 E

Standard [CURRENT] 2015-04

DIN 20622:2015-04

Suspended-monorail transport systems for mining - Permissible loads for suspensions and their abnutments and railprofile I 140 E

This standard applies to the calculation and determination of the permissible loads for suspensions taking into account length and slope of the track for: - rail tracks, shown by the example of ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Suspended monorails for mining - Toothed disc for roller fairleads - Dimensions, materials

Standard [CURRENT] 2015-04

DIN 20597:2015-04

Suspended monorails for mining - Toothed disc for roller fairleads - Dimensions, materials

Toothed discs are used in cable-driven suspended monorails as fixing and adjusting elements for the rope guide pulleys attached to the roller fairleads on the empty side. The discs are used in ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units

Standard [CURRENT] 2015-03

DIN 55474:2015-03

Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2015-03

DIN 81415:2015-03

Turnbuckles for furniture and fitments

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Entering catches, light type, for furniture and fitments

Standard [CURRENT] 2015-03

DIN 81416:2015-03

Entering catches, light type, for furniture and fitments

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Terms and definitions of nuclear technology, only on CD-ROM

Standard [CURRENT] 2015-04

DIN 25401:2015-04

Terms and definitions of nuclear technology, only on CD-ROM

DIN 25401 contains terms and definitions from the field of nuclear technology for the physical and chemical basics, but also terms and definitions specific to the subjects of reactor design ...

Accessibility

from 265.60 EUR VAT included

from 248.22 EUR VAT excluded

To selection

Hatchet for firefighters with protective cover

Standard [CURRENT] 2015-05

DIN 14924:2015-05

Hatchet for firefighters with protective cover

This consolidated new version of the standard contains all the changes suggested in the Draft Amendment E DIN 14924/A1:2014-08 without any modifications. The Amendment A1 to the standard DIN 14924 ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Lubricants - Lubricating greases G - Classification and requirements

Standard [CURRENT] 2015-04

DIN 51826:2015-04

Lubricants - Lubricating greases G - Classification and requirements

This document has been prepared by Working Committee NA 062-06-52 AA "Anforderungen an Schmierfette" ("Requirements for greases") at the Standardization Committee for Petroleum, Fuels, Lubricants ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2015-05

DIN 81408:2015-05

Screwing-hooks

This standard defines the sizes, masses and styles for screwing hooks made of brass. These screwing hooks are preferably used on vessels and in offshore area for hanging parts such as dishes ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Saddle supports for horizontal apparatus

Standard [CURRENT] 2015-06

DIN 28080:2015-06

Saddle supports for horizontal apparatus

This standard applies for saddle supports with saddle plates on horizontal apparatus which are usually welded onto the apparatus. It describes a selection of possible saddle shapes and dimensions.

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel)

Standard [CURRENT] 2015-09

DIN 40744:2015-09

Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel)

This standard applies for low-maintenance stationary valve regulated lead batteries with positive tubular plates in plastic containers which are used as current source, for example for safety ...

This document has been corrected by

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Lead acid batteries - Stationary valve regulated cells with positive tubular plates and immobilized electrolyte (gel)

Standard [CURRENT] 2015-09

DIN 40742:2015-09

Lead acid batteries - Stationary valve regulated cells with positive tubular plates and immobilized electrolyte (gel)

This standard applies for stationary lead acid batteries with positive tubular plates in plastic containers which are used as current source, for example for safety lighting, for ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Milk and milk products - Determination of lactose and D-galactose content - Enzymatic method

Standard [CURRENT] 2015-05

DIN 10344:2015-05

Milk and milk products - Determination of lactose and D-galactose content - Enzymatic method

This standard specifies an enzymatic method for determination of lactose and D-galactose content in milk and milk products. The method is also applicable in the presence of other sugars. In the ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Testing of flexible cellular materials - Indentation test on finished parts

Standard [CURRENT] 2015-04

DIN 53579:2015-04

Testing of flexible cellular materials - Indentation test on finished parts

This document has been prepared by Working Committee NA 062-04-37 AA "Prüfung weich-elastischer Schaumstoffe" ("Testing of flexible cellular polymeric materials") of the DIN Standards Committee ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Standard [CURRENT] 2015-05

DIN 4019:2015-05

Soil - Analysis of settlement

This standard applies to the identification of size and chronological sequence of settlements and foundation tilting resulting from changes in volume and shape of the subsoil under vertical static ...

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Milk and milk products - Determination of L- and D-Lactic acid content (L- and D-Lactate) - Reflectometric method (screening method)

Standard [CURRENT] 2015-05

DIN 10054:2015-05

Milk and milk products - Determination of L- and D-Lactic acid content (L- and D-Lactate) - Reflectometric method (screening method)

This document describes an enzymatic/reflectometric screening method (test strip detection) to determine the L- and D-lactic acid (L- and D-lactate) content in milk and dairy products. The L- and ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2025-04

DIN 19432:2025-04

Protective trousers against wild boar

This document applies to protective trousers used for hunting, which are designed to reduce the consequences of injuries that can be caused by attacks from male wild boars. The primary aim is to ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials

Standard [CURRENT] 2025-03

DIN 25493:2025-03

Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials

The purpose of this document is to prevent material damage to component surfaces (for example, corrosive cracking) or malfunctions caused by such damage. This document specifies requirements for ...

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle

Standard [CURRENT] 2025-05

DIN 14420:2025-05

Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle

This document applies to fire-fighting centrifugal pumps (FP) in conjunction with DIN EN 1028-1 and DIN EN 1028-2. When applying this document, it is assumed that a type test of the fire-fighting ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Titanium and titanium alloy bars - Technical specification

Standard [CURRENT] 2025-05

DIN 17862:2025-05

Titanium and titanium alloy bars - Technical specification

This document applies to bars made of titanium and titanium alloys, hereinafter to as "titanium materials". Titanium materials are applicable to round, square, hexagonal, octagonal, and flat bars ...

Accessibility

from 112.80 EUR VAT included

from 105.42 EUR VAT excluded

To selection

First aid material - First-aid box for fire-brigade motor cars

Standard [CURRENT] 2025-03

DIN 14142:2025-03

First aid material - First-aid box for fire-brigade motor cars

This document applies to first-aid boxes for fire-brigade motor cars and provides basic first aid equipment. This document has been prepared by Working Committee NA 176-04-08 AA "Verbandmittel und ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking

Standard [CURRENT] 2025-04

DIN 14381:2025-04

Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking

Pressure valve type B according to this document serve as shut-off devices for the pressure outlets of fire pumps. This document only lists pressure valve type B currently in use by fire departments.

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Firefighting and fire protection - Sieves for pumps and reservoirs for firefighting

Standard [CURRENT] 2025-04

DIN 14423:2025-04

Firefighting and fire protection - Sieves for pumps and reservoirs for firefighting

Sieves in accordance with DIN 14423 are designed to prevent foreign objects from entering water tanks for firefighting. They can also be used to limit the volume flow during tank filling in order ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Rolling bearings - Testing conditions for the experimental verification of the dynamic load rating of ball carriage or roller carriage profiled rail guides

Standard [CURRENT] 2025-08

DIN 631:2025-08

Rolling bearings - Testing conditions for the experimental verification of the dynamic load rating of ball carriage or roller carriage profiled rail guides

This standard specifies the test parameters for the verification of the dynamic load rating of ball carriage or roller carriage profiled rail guides in accordance with DIN ISO 14728-1. This ...

Accessibility

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded

To selection

Pressure resistant circular glass-to-metal fused sight glasses for holders with recess

Standard [CURRENT] 2025-08

DIN 7079:2025-08

Pressure resistant circular glass-to-metal fused sight glasses for holders with recess

This document applies to circular glass-to-metal fused sight glasses in which the viewing pane is fused into a metal ring. These may be used in flanged mountings in accordance with DIN 28120 ...

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English

Standard [CURRENT] 2025-07

DIN 65433:2025-07

Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English

This document specifies the characteristics of sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head used together with screws and bolts to replace oversize shank fasteners ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with countersunk head; Text in German and English

Standard [CURRENT] 2025-07

DIN 65430:2025-07

Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with countersunk head; Text in German and English

This document specifies the characteristics of sleeves, wall thickness 0,25 mm, for fasteners with countersunk head used together with screws and bolts to replace oversize shank fasteners for ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Aerospace series - Sleeve - Wall thickness 0,5 mm, for fasteners with protruding head; Text in German and English

Standard [CURRENT] 2025-07

DIN 65429:2025-07

Aerospace series - Sleeve - Wall thickness 0,5 mm, for fasteners with protruding head; Text in German and English

This document specifies the characteristics of sleeves, wall thickness 0,5 mm, for fasteners with protruding head used together with screws and bolts to replace oversize shank fasteners for ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Products for „..."

597,662 search results