Produktsuche

Road vehicles - Steadiness of vehicles with tiltable constructional systems - Air-suspended semitrailer with rear-dump truck cavity built-up

Standard [CURRENT] 2011-12

DIN 70073:2011-12

Road vehicles - Steadiness of vehicles with tiltable constructional systems - Air-suspended semitrailer with rear-dump truck cavity built-up

This standard contains test methods and criteria for categorisation of semitrailers with rear-dump truck cavity built-up with respect to their steadiness during tipping of the load. It does not ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Chairs for domestic use - Performance characteristics - Requirements and test methods

Standard [CURRENT] 2011-11

DIN 68878:2011-11

Chairs for domestic use - Performance characteristics - Requirements and test methods

This standard applies to chairs in the living area which are not fixed to the floor. It does not apply for children's high chairs, folding chairs and chairs for external use. This standard ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Manufacturing processes severing - Classification, subdivision, terms and definitions

Standard [CURRENT] 2013-08

DIN 8588:2013-08

Manufacturing processes severing - Classification, subdivision, terms and definitions

This standard has been prepared by the Standards Committee Technical Fundamentals, Working Committee NA 152-06-10 AA "Technische Produktdokumentation" ("Technical Product Documentation") at DIN.

Corrected document: Customers who purchased the previous document DIN 8588:2003-09 received free of charge

Accessibility

from 97.40 EUR VAT included

from 91.03 EUR VAT excluded

To selection

Artificially constructed water ponds for fire fighting

Standard [CURRENT] 2019-06

DIN 14210:2019-06

Artificially constructed water ponds for fire fighting

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Aerospace - Sealing ring - Technical specification

Standard [CURRENT] 2019-06

DIN 65304:2019-06

Aerospace - Sealing ring - Technical specification

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Aerospace series - Sealing rings - Dimensions, masses

Standard [CURRENT] 2019-06

DIN 65219:2019-06

Aerospace series - Sealing rings - Dimensions, masses

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

Standard [CURRENT] 2013-09

DIN 8076:2013-09

Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

This standard specifies the requirements and test methods for mechanical fittings intended to join PE pipes of outside diameters of up to 110 mm for piping systems at operating temperature ≤ 40 ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density

Standard [CURRENT] 2013-10

DIN 52102:2013-10

Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density

This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

First aid material to be carried on motorcycles

Standard [CURRENT] 2014-01

DIN 13167:2014-01

First aid material to be carried on motorcycles

This standard specifies the first aid kits to be used for motorcycles. The content specified in this document is intended to permit first aid to be properly carried out at the accident site.

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2013-10

Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)

This document specifies a method for the determination of the mass fractions of the elements Al (aluminium), As (arsenic), Ba (barium), Be (beryllium), Ca (calcium), Cd (cadmium), Co (cobalt), Cr ...

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Double offset screwdrivers for cross point screws

Standard [CURRENT] 2013-10

DIN 5208:2013-10

Double offset screwdrivers for cross point screws

This standard specifies requirements for double offset screwdrivers for cross point screws. In addition to the measurements for different size classes of double offset screwdrivers, the DIN ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2013-10

DIN 52101:2013-10

Aggregates test methods - Sampling

This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Socket wrenches with hexagon drive extension for hexagon bolts, machine operated

Standard [CURRENT] 2013-10

DIN 7424:2013-10

Socket wrenches with hexagon drive extension for hexagon bolts, machine operated

This standard specifies requirements for machine operated socket wrenches with hexagon drive extension for hexagon bolts. In addition to the measurements for different size classes of socket ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Test methods for aggregates - Determination of water absorption under pressure

Standard [CURRENT] 2013-10

DIN 52009:2013-10

Test methods for aggregates - Determination of water absorption under pressure

This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Testing of aggregates - Testing with respect to purity

Standard [CURRENT] 2013-10

DIN 52099:2013-10

Testing of aggregates - Testing with respect to purity

This document has been prepared by Working Committee NA 062-03-13 AA "Gemeinschaftsarbeitsausschuss NA 062/FGSV: Gesteinskörnungen; Prüfverfahren, Petrographie, Probenahme und Präzision" ("Joint ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2016-05

DIN 2509:2016-05

Fasteners - Double end studs

This standard specifies requirements for double end studs with a flattened dog point on one thread end. Double end studs are designed primarily to be used for clamping two components together by ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2014-07

DIN 73379:2014-07

Road vehicles - Fuel hoses

Since the previous versions of DIN 73379, Parts 1 and 2, have been withdrawn, there is currently no adequate overall acceptance specification in the German-speaking area. The present standard, by ...

Accessibility

from 105.20 EUR VAT included

from 98.32 EUR VAT excluded

To selection

Standard [CURRENT] 2013-10

DIN 5493:2013-10

Logarithmic quantities and units

This standard contains supplementary specifications to DIN EN 60027-3:2007-11, "Letter symbols to be used in electrical technology - Part 3: Logarithmic quantities". This document has been ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Compensators for gas-installations - Expansion joints with stainless steel bellows unit - Safety requirements, testing, marking

Standard [CURRENT] 2013-12

DIN 30681:2013-12

Compensators for gas-installations - Expansion joints with stainless steel bellows unit - Safety requirements, testing, marking

This standard applies to requirements and testing of overground expansion joints with stainless steel bellows units (hereinafter referred to as compensators) to DIN 500 and MOP 16 bar operated ...

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Production in optical engineering - Input parameters for CNC machine tools

Standard [CURRENT] 2013-10

DIN 58768:2013-10

Production in optical engineering - Input parameters for CNC machine tools

This document summarizes terms and definitions and their designation used in the production in optical engineering on the user interface of CNC machine tools. The terms serve for clear description ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Road vehicles - Electrical cables - Design rule for abbreviation codes

Standard [CURRENT] 2013-12

DIN 76722:2013-12

Road vehicles - Electrical cables - Design rule for abbreviation codes

This standard applies to electrical cables intended for use in road vehicles. It specifies the structure of codes, or the nomenclature, for these cables. This standard is intended for: - the ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Information and documentation - Criteria for trustworthy digital archives

Standard [CURRENT] 2012-04

DIN 31644:2012-04

Information and documentation - Criteria for trustworthy digital archives

Accessibility

from 119.20 EUR VAT included

from 111.40 EUR VAT excluded

To selection

Excavations, foundations and underpinnings in the area of existing buildings

Standard [CURRENT] 2013-04

DIN 4123:2013-04

Excavations, foundations and underpinnings in the area of existing buildings

This standard applies to excavations and foundation works next to existing buildings, as well as common underpinning of parts of the building in narrow strips, using brickwork, concrete or ...

Corrected document: Customers who purchased the previous document DIN 4123:2011-05 received free of charge

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Guard rails

Standard [CURRENT] 2013-03

DIN 83216:2013-03

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Guard rails

Guard rails according to this standard are used on stairs in the outside and inside areas of ships and floating equipment of the Deutsch Marine (German Navy), they are not intended for the ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Fundamental requirements

Standard [CURRENT] 2013-03

DIN 83214:2013-03

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Fundamental requirements

Stairs according to this standard are used in the outside and inside areas of ships and floating equipment of the Deutsche Marine (German Navy), they are not intended for the passenger area on ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Fixed guard rails on deck for sea going ships

Standard [CURRENT] 2013-03

DIN 81702:2013-03

Fixed guard rails on deck for sea going ships

Guard rails according to this standard are used in the outside areas of ships; they are not intended for passenger ships. Safety requirements, designs, dimensions, materials and parts are specified.

Accessibility

from 74.80 EUR VAT included

from 69.91 EUR VAT excluded

To selection

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Stairs

Standard [CURRENT] 2013-03

DIN 83215:2013-03

Stairs and guard rails for stairs for outside and inside area on seagoing ships - Stairs

Stairs according to this standard are used in the outside and inside areas of ships and floating equipment of the Deutsche Marine (German Navy), they are not intended for the passenger area on ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Standard [CURRENT] 2013-04

DIN 78:2013-04

Protrusions of bolt ends

This document specifies bolt end protrusions for general purpose assemblies of bolts, screws and similar fasteners with ISO metric screw thread in accordance with DIN 13-28, and with tapping screw ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Recessed handholes and footholes in chain lockers

Standard [CURRENT] 2013-03

DIN 83219:2013-03

Recessed handholes and footholes in chain lockers

Recessed hand- and footholes are holes cut, for example, into the partition walls in chain lockers on ships, they serve as hand- and footholes when entering the chain locker. The chain lockers ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Stainless steel fittings for the food and chemical industry - Screw pipe connections for expanding and welding

Standard [CURRENT] 2013-02

DIN 11851:2013-02

Stainless steel fittings for the food and chemical industry - Screw pipe connections for expanding and welding

This standard applies for stainless steel screw pipe connections for expanding or welding for piping systems in the food industry. It specifies requirement for the dimensions, design and materials ...

Corrected document: Customers who purchased the previous document DIN 11851:2011-04 received free of charge

Accessibility

from 90.50 EUR VAT included

from 84.58 EUR VAT excluded

To selection

Fibre ropes - Splices - Definitions, safety requirements, test method

Standard [CURRENT] 2013-04

DIN 83319:2013-04

Fibre ropes - Splices - Definitions, safety requirements, test method

This standard specifies requirements for the manufacture of end splices (soft eye, thimbled eye) and connection splices (short splice, long splice) on spliceable fibre ropes in twisted rope ...

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Testing of cooling lubricants - Determination of the pH value of water-mixed cooling lubricants

Standard [CURRENT] 2013-05

DIN 51369:2013-05

Testing of cooling lubricants - Determination of the pH value of water-mixed cooling lubricants

This document has been prepared by NA 062-06-61-02 UA "Prüfung von Kühlschmierstoffen" ("Testing of cooling lubricants") at the Fachausschuss Mineralöl- und Brennstoffnormung (FAM) ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Ships and marine technology - Round- or spiral plated man-made fibre ropes

Standard [CURRENT] 2013-04

DIN 83307:2013-04

Ships and marine technology - Round- or spiral plated man-made fibre ropes

This standard specifies the construction and sizes of round- or spiral-plated man-made fibre ropes. This standard only contains the types E, K and H and is a supplement to the standards DIN EN ISO ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Standard [CURRENT] 2013-04

DIN 81319:2013-04

Click for trapdoors with mortise-lock

This standard specifies the dimensions, materials and design versions for clicks. The clicks are used for the locking of internal doors in a slightly open state onboard ships in connection with ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Standard [CURRENT] 2013-04

DIN 81320:2013-04

Turnbuckles for flaps in passageways

Turnbuckles in accordance with this standard are used for the locking of flaps in walls or ceilings in the interior of ships. This standard specifies the dimensions, materials and designs for ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Drain pots with strainer cover and suction strainers

Standard [CURRENT] 2013-07

DIN 83422:2013-07

Drain pots with strainer cover and suction strainers

Drain pots with strainer cover and suction strainers in accordance with this standard are intended for drainage of decks in small rooms, such as forepeak storage spaces, steering gear compartment ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Shell end mills with tenon and parallel key drive - Dimensions and technical delivery conditions

Standard [CURRENT] 2020-10

DIN 1880:2020-10

Shell end mills with tenon and parallel key drive - Dimensions and technical delivery conditions

Accessibility

from 67.70 EUR VAT included

from 63.27 EUR VAT excluded

To selection

Standard [CURRENT] 2013-05

DIN 562:2013-05

Square thin nuts - Product grade B

This standard specifies requirements for thin square nuts with metric thread for sizes M1,6 to M10 in product grade B. With respect to the current standard, in addition to editorial adjustments ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Pipe nuts with thread according to DIN EN ISO 228-1

Standard [CURRENT] 2013-05

DIN 431:2013-05

Pipe nuts with thread according to DIN EN ISO 228-1

This standard specifies requirements for size G 1/8 to G 6 (hexagon and octagon) pipe nuts with thread in accordance with DIN EN ISO 228-1 and of product grades B and C. Along with editorial ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Welding on flanges (collars) for bulkhead fittings for pipes

Standard [CURRENT] 2013-06

DIN 86057:2013-06

Welding on flanges (collars) for bulkhead fittings for pipes

This standard specifies, in accordance with the standards for flanges for ship-building, the dimensions and materials for connecting flanges as well as bulkhead fittings for passing pipes through ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Ships and marine technology - Extra light duty welding flanges

Standard [CURRENT] 2013-06

DIN 86040:2013-06

Ships and marine technology - Extra light duty welding flanges

This standard specifies, in accordance with the standards for pipes for ship-building, the dimensions, designs, materials and the designation for flanges for welding of the extra light duty series.

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Analysis of honey - Determination of water-insoluble solids

Standard [CURRENT] 2013-05

DIN 10743:2013-05

Analysis of honey - Determination of water-insoluble solids

This standard specifies a test method for the determination of water-insoluble solids in honey. When measuring the water-insoluble solids, the contaminations of honey and thus the quality aspects ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Standard [CURRENT] 2013-06

DIN 10973:2013-06

Sensory analysis - In/out test

The standard has been prepared by the Food and Agricultural Products Standards Committee (NAL), Working Committee NA 057-01-01 AA "Sensorik" ("Sensory analysis"). It specifies a sensory test ...

Accessibility

from 82.60 EUR VAT included

from 77.20 EUR VAT excluded

To selection

Analysis of coffee and coffee products - Preparation of coffee beverage for analytical purposes

Standard [CURRENT] 2013-06

DIN 10792:2013-06

Analysis of coffee and coffee products - Preparation of coffee beverage for analytical purposes

This standard has been prepared by the Food and Agricultural Products Standards Committee (NAL), Working Committee NA 057-05-09 AA "Kaffee" ("Coffee") and specifies a method for the preparation of ...

Accessibility

from 26.10 EUR VAT included

from 24.39 EUR VAT excluded

To selection

Information and documentation - Requirements for the long-term management of persistent identifiers

Standard [CURRENT] 2013-01

DIN 31646:2013-01

Information and documentation - Requirements for the long-term management of persistent identifiers

For permanent citeability of digital objects, location-independent, persistent references are necessary which allow for reliable identification and addressing beyond technical and organizational ...

Accessibility

from 119.20 EUR VAT included

from 111.40 EUR VAT excluded

To selection

Electroplated coatings - Modified corrodkote corrosion test (mod. CORR-Test)

Standard [CURRENT] 2012-12

DIN 50958:2012-12

Electroplated coatings - Modified corrodkote corrosion test (mod. CORR-Test)

The procedure described in this standard serves as a test for corrosion resistance, particularly for objects made of aluminium materials and steel with nickel-chromium or copper-nickel-chromium ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Production in optical engineering - Diamond impregnated tools for facets

Standard [CURRENT] 2013-01

DIN 58723:2013-01

Production in optical engineering - Diamond impregnated tools for facets

This standard is applicable for diamond impregnated grinding tools used in optical engineering for bevelling and, as a result, for production of facets that are not particularly tolerated - ...

Accessibility

from 36.70 EUR VAT included

from 34.30 EUR VAT excluded

To selection

Petroleum waxes - Determination of melting point (cooling curve)

Standard [CURRENT] 2012-12

DIN 51532:2012-12

Petroleum waxes - Determination of melting point (cooling curve)

This document has been prepared by NA 062-06-61 AA "Prüfung von Schmierölen, sonstigen Ölen und Paraffinen" ("Testing of lubricating oils, other oils and Paraffin") at the Standardization ...

Accessibility

from 44.70 EUR VAT included

from 41.78 EUR VAT excluded

To selection

Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10

Standard [CURRENT] 2013-01

DIN 86059:2013-01

Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10

This standard defines the dimensions and designs for bulkhead pieces for connection of double bottom tanks with pipelines made of steel and for feedthrough of metal pipelines through bulkhead and ...

Accessibility

from 52.20 EUR VAT included

from 48.79 EUR VAT excluded

To selection

Connecting sockets with pipe flange, for steel tubes, nominal pressure 10

Standard [CURRENT] 2013-01

DIN 86061:2013-01

Connecting sockets with pipe flange, for steel tubes, nominal pressure 10

This standard specifies the dimensions and designs for sockets for connection of tanks, bunkers and containers with metal pipelines with nominal pressure 10 onboard ships. One side of these ...

Accessibility

from 60.10 EUR VAT included

from 56.17 EUR VAT excluded

To selection

Products for „..."

597,662 search results