Products for „..."

Refine your search

599,810 search results

Sort by:
  • Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load

    Standard [CURRENT] 2018-03

    DIN 3193:2018-03

    Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Lighting in public car-parks and on public off-street parking spaces

    Standard [CURRENT] 2018-04

    DIN 67528:2018-04

    Lighting in public car-parks and on public off-street parking spaces

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Testing of liquid fuels - Determination of the crystallization point of pure benzene

    Standard [CURRENT] 2018-03

    DIN 51798:2018-03

    Testing of liquid fuels - Determination of the crystallization point of pure benzene

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Information processing - Programming language PEARL - SafePEARL

    Standard [CURRENT] 2018-03

    DIN 66253:2018-03

    Information processing - Programming language PEARL - SafePEARL

    Accessibility

    from 265.60 EUR VAT included

    from 248.22 EUR VAT excluded

    To selection
  • Gas analysis - Terms and definitions

    Standard [CURRENT] 2018-04

    DIN 51897:2018-04

    Gas analysis - Terms and definitions

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Screw caps - Pipe thread G 1 to G 6

    Standard [CURRENT] 2018-03

    DIN 86121:2018-03

    Screw caps - Pipe thread G 1 to G 6

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Seals with higher thermal resistant for unions and flanges in connection with gas meters and pressure regulators as well as flange connections in gas installations

    Standard [CURRENT] 2018-08

    DIN 30653:2018-08

    Seals with higher thermal resistant for unions and flanges in connection with gas meters and pressure regulators as well as flange connections in gas installations

    Accessibility

    This standard is part of the DVGW body of rules.

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes

    Standard [CURRENT] 2018-03

    DIN 86129:2018-03

    Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Coverings for wells, spring water chambers and other water supply construction - Principles for construction

    Standard [CURRENT] 2018-04

    DIN 1239:2018-04

    Coverings for wells, spring water chambers and other water supply construction - Principles for construction

    Accessibility

    This standard is part of the DVGW body of rules.

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products

    Standard [CURRENT] 2015-12

    DIN 52461:2015-12

    Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products

    This standard specifies the test method for assessing the rain resistance of freshly applied aqueous dispersion-based sealants. The committee responsible for this standard is NA 005-02-16 AA ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Sealing and glazing - Terms and definitions

    Standard [CURRENT] 2015-12

    DIN 52460:2015-12

    Sealing and glazing - Terms and definitions

    This standard specifies terms from the field of sealants for joint and glass seals. It contains a subdivided list of generally applicable terms and special terms from window glazing. The committee ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)

    Standard [CURRENT] 2015-12

    DIN 55406:2015-12

    Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)

    The standard contains requirements for the supply and purchase as well as for the use and test methods for closures for beverage bottles. The standard applies to one-piece and two-piece screw caps ...

    Corrected document: Customers who purchased the previous document DIN 55406:2015-09 received free of charge

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Condition monitoring and diagnostics of machines - Thermography - General procedures (ISO 18434-1:2008, modified)

    Standard [CURRENT] 2015-12

    DIN 19277:2015-12

    Condition monitoring and diagnostics of machines - Thermography - General procedures (ISO 18434-1:2008, modified)

    DIN 19277 "Condition monitoring and diagnostics of machines - Thermography - General procedures (ISO 18434-1:2008 modified)" has been prepared by the national Working Committee NA 062-08-27 AA ...

    Accessibility

    from 119.20 EUR VAT included

    from 111.40 EUR VAT excluded

    To selection
  • Fuel hose pipes - Functional requirements

    Standard [CURRENT] 2016-03

    DIN 73388:2016-03

    Fuel hose pipes - Functional requirements

    DIN 73379 for fuel hoses has been revised. Supplementation of an acceptance specification adequate for fuel hose pipes, which adopts the newly revised DIN 73388. In terms of its character, this ...

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Ladders on ships - Installation

    Standard [CURRENT] 2016-02

    DIN 83200:2016-02

    Ladders on ships - Installation

    This standard provides information on the installation of lightweight ladders in accordance with DIN 83202-1 and 83202-5 to ensure safe use. This standard contains information on the positioning ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Stud link anchor chain cables, grade K4 - End links; Text in German and English

    Standard [CURRENT] 2016-02

    DIN 81850:2016-02

    Stud link anchor chain cables, grade K4 - End links; Text in German and English

    This standard applies to end links for stud link anchor chain cables, grade K4 which are components of three link adapter pieces as specified in DIN 81854. Compared to DIN 81850:2007-12, for ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Shaft sinking - Pulleys for flat winding ropes - Safety requirements and testing

    Standard [CURRENT] 2016-03

    DIN 21151:2016-03

    Shaft sinking - Pulleys for flat winding ropes - Safety requirements and testing

    The single-piece pulleys with spherical roller bearings and two-piece bearing housings specified in this standard are mainly used in the construction and maintenance of vertical and inclined shafts.

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Shaft sinking - Shaft plumbs

    Standard [CURRENT] 2016-03

    DIN 21198:2016-03

    Shaft sinking - Shaft plumbs

    Shaft plumbs according to this standard are mainly used for sinking, setting up and repairing shafts and shaft-like workings. Depending on the working depth, four plumbs sizes with weights between ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Production in optical engineering - Ball seats

    Standard [CURRENT] 2016-03

    DIN 58729:2016-03

    Production in optical engineering - Ball seats

    This standard specifies shapes and dimensions for ball seats intended for use with supporting, grinding or polishing tools in optical manufacturing. The ball seats can be connected to the tools by ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Information and documentation - Romanization of Tamil

    Standard [CURRENT] 2016-02

    DIN 33903:2016-02

    Information and documentation - Romanization of Tamil

    This standard specifies the transcription of the letters of the Tamil alphabet into Latin letters. It is based on international standards as well as on the preprint of the alphabetical tables ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Paints and varnishes - Methods for testing the resistance of coatings to ionizing radiation in nuclear plants

    Standard [CURRENT] 2016-03

    DIN 53781:2016-03

    Paints and varnishes - Methods for testing the resistance of coatings to ionizing radiation in nuclear plants

    This standard specifies methods for testing the resistance of organic and/or inorganic-based coatings to ionizing radiation. This standard applies to testing the resistance of coatings to ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Gymnastic equipment - Gymnastics bench - Dimensions, requirements, testing

    Standard [CURRENT] 2016-04

    DIN 7909:2016-04

    Gymnastic equipment - Gymnastics bench - Dimensions, requirements, testing

    This standard applies to benches from 2 000 mm to 4 000 mm in length used in gymnastics, for example in schools or clubs. It specifies the design and functional characteristics as well as safety ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars; without springs

    Standard [CURRENT] 2012-01

    DIN 20553:2012-01

    Wheel sets with taper roller bearings for mine cars; without springs

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars, exterior spring suspension

    Standard [CURRENT] 2012-01

    DIN 20555:2012-01

    Wheel sets with taper roller bearings for mine cars, exterior spring suspension

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. Therefore, the simple extensibility and flexibility of ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Wheel sets with taper roller bearings for mine cars, interior spring suspension

    Standard [CURRENT] 2012-01

    DIN 20556:2012-01

    Wheel sets with taper roller bearings for mine cars, interior spring suspension

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

    Standard [CURRENT] 2012-01

    DIN 20586:2012-01

    Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers

    Especially in underground coalmining with its difficult and often changing operating conditions, rail transport provides various advantages. The simple extensibility and flexibility of the ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Pit converted timber - Timber sleepers

    Standard [CURRENT] 2012-02

    DIN 21325:2012-02

    Pit converted timber - Timber sleepers

    Sleepers are intended to hold the tracks of the mine cars in their defined position and to transfer the forces of the tracks resulting from the imposed loads onto the track bed. Accordingly, their ...

    Accessibility

    from 36.70 EUR VAT included

    from 34.30 EUR VAT excluded

    To selection
  • Terms and definitions used on ageing of materials - Polymeric materials

    Standard [CURRENT] 2012-09

    DIN 50035:2012-09

    Terms and definitions used on ageing of materials - Polymeric materials

    DIN 50035 has been prepared by the Plastics Standards Committee (FNK), Working Committee 054-01-04 AA "Verhalten gegen Umgebungseinflüsse" ("Environmental resistance"). It contains general ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Support rings for carbon and stainless steel agitator vessels - Position

    Standard [CURRENT] 2012-02

    DIN 28160:2012-02

    Support rings for carbon and stainless steel agitator vessels - Position

    This standard applies for the position of support rings for carbon and stainless steel agitator vessels according to DIN 28136-1, form A and form B. The standard has been prepared by Working ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Flat link chains for use in continuous conveyors in mining

    Standard [CURRENT] 2012-05

    DIN 22255:2012-05

    Flat link chains for use in continuous conveyors in mining

    In underground mining, coal occurs during loosening (with shearer loaders, amongst others) as lumpy debris mixed with rock with individual pieces of very different sizes and hardness. For ...

    Accessibility

    from 90.50 EUR VAT included

    from 84.58 EUR VAT excluded

    To selection
  • Slackline systems - General and safety requirements and test methods

    Standard [CURRENT] 2012-02

    DIN 79400:2012-02

    Slackline systems - General and safety requirements and test methods

    This standard applies to slackline systems installed at jump height. It specifies terms and definitions, safety requirements for the material and all components used, including the mounting, as ...

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Pore size analysis - Representation of pore size distributions

    Standard [CURRENT] 2012-03

    DIN 66139:2012-03

    Pore size analysis - Representation of pore size distributions

    This standard is applicable to the representation of pore size distributions in general, but is however particularly applicable to those calculated from experimental gas absorption or mercury ...

    Accessibility

    from 97.40 EUR VAT included

    from 91.03 EUR VAT excluded

    To selection
  • Playing field equipment - Beach sports equipment - Requirements and test methods

    Standard [CURRENT] 2012-04

    DIN 33957:2012-04

    Playing field equipment - Beach sports equipment - Requirements and test methods

    This standard applies for beach sports equipment installed in or on sand, which is intended for use in gymnasiums or outdoors and includes a goal and playing equipment involving baskets or nets.

    Accessibility

    from 67.70 EUR VAT included

    from 63.27 EUR VAT excluded

    To selection
  • Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing

    Standard [CURRENT] 2016-04

    DIN 24339:2016-04

    Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing

    This document has been prepared by Working Committee NA 60-36-90 AA "Ausführungsrichtlinie Hydraulik" ("Execution guideline hydraulics") of Technical Section "Fluid power systems" of Standards ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Double-pole socket-outlets with protective contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89262:2016-03

    Double-pole socket-outlets with protective contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Double-pole socket-outlets with protective contact - Switchable - AC/DC 10 A, AC/DC 250 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89263:2016-03

    Double-pole socket-outlets with protective contact - Switchable - AC/DC 10 A, AC/DC 250 V, degree of protection IP56

    Switchable sockets according to this standard belong to the so-called "HNA installation material", the standardization of which was started by the "Commercial Ship Standards Committee" in the 1920s.

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Double-pole coupling with protective contact DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89266:2016-03

    Double-pole coupling with protective contact DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Portable socket-outlets according to this standard belong to the so-called "HNA installation material", the standardization of which was started by the "Commercial Ship Standards Committee" in the ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Double-pole plugs with protective contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89267:2016-03

    Double-pole plugs with protective contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56

    Plugs according to this standard belong to the so-called "HNA installation material", the standardization of which was started by the "Commercial Ship Standards Committee" in the 1920s. They ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
  • Installations switches - AC/DC 10 A, AC/DC 250 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89270:2016-03

    Installations switches - AC/DC 10 A, AC/DC 250 V, degree of protection IP56

    Installation switches according to DIN 89270 with round brass housing are used for electrical installation in shipbuilding, preferably in the outside area and in the engine room. They belong to ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Glands for electrical cables - Cables screw bushings

    Standard [CURRENT] 2016-03

    DIN 89283:2016-03

    Glands for electrical cables - Cables screw bushings

    The cables screw bushing according to DIN 89283 is the screw-in part of a plug or coupling housing on the cable side. It can be regarded as part of a cable gland and is used to insert a two- or ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Junction inserts with mantle terminals - 16 A, 500 V, for conductors up to 2,5 mm²

    Standard [CURRENT] 2016-03

    DIN 89300:2016-03

    Junction inserts with mantle terminals - 16 A, 500 V, for conductors up to 2,5 mm²

    Junction inserts according to this standard belong to the so-called "HNA installation material", the standardization of which was started by the "Commercial Ship Standards Committee" in the 1920s.

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Double-pole contact inserts with protective contact for watertight plug and socket devices - DC 10 A, AC 16, 250 V

    Standard [CURRENT] 2016-03

    DIN 89320:2016-03

    Double-pole contact inserts with protective contact for watertight plug and socket devices - DC 10 A, AC 16, 250 V

    The double-pole contact inserts according to DIN 89320 are used to equip watertight plugs, sockets and couplings used in electrical installations on ships with operating voltages up to 250 V. The ...

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Switch insert - AC/DC 10 A, AC/DC 250 V, degree of protection IP00

    Standard [CURRENT] 2016-03

    DIN 89322:2016-03

    Switch insert - AC/DC 10 A, AC/DC 250 V, degree of protection IP00

    The switch inserts according to this standard belong to the "HNA installation material" and are installed in the installation switches according to DIN 89270 and in the switchable sockets ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Analysis of tea - Determination of total ash

    Standard [CURRENT] 2016-04

    DIN 10802:2016-04

    Analysis of tea - Determination of total ash

    This standard specifies a method for determination of the total ash of tea. The organic compounds of the sample are decomposed at (525 ± 25) °C to constant mass. This standard has been prepared by ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Films for packaging - Plastic films - Properties, testing

    Standard [CURRENT] 2016-04

    DIN 16995:2016-04

    Films for packaging - Plastic films - Properties, testing

    This standard provides an overview of properties of plastic films used in the packaging industry. The document has been prepared by the Working Committee NA 115-02-01 AA "Flexible Packmittel - ...

    Accessibility

    from 44.70 EUR VAT included

    from 41.78 EUR VAT excluded

    To selection
  • Imaging materials - Material for photographs - Composition of storage materials

    Standard [CURRENT] 2016-04

    DIN 15549:2016-04

    Imaging materials - Material for photographs - Composition of storage materials

    This document has been prepared at DIN Standards Committee Entertainment Technology, Photography and Cinematography (NVBF) by the responsible Working Committee NA 149-00-01 AA "Fotografische ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Tapping screw connections - Guideline values for core hole diameters and use

    Standard [CURRENT] 2016-04

    DIN 7975:2016-04

    Tapping screw connections - Guideline values for core hole diameters and use

    This standard specifies requirements for tapping screw connections with screw thread as specified in DIN EN ISO 1478. It covers the connection of tapping screws with metals of a strength as given ...

    Accessibility

    from 82.60 EUR VAT included

    from 77.20 EUR VAT excluded

    To selection
  • Junction boxes - AC/DC 16 A, 500 V, degree of protection IP56

    Standard [CURRENT] 2016-03

    DIN 89250:2016-03

    Junction boxes - AC/DC 16 A, 500 V, degree of protection IP56

    The junction box according to DIN 89250 made of brass is used for electrical installations in shipbuilding, preferably in the outside area and in the engine room. It is a worldwide known "classic" ...

    Accessibility

    from 60.10 EUR VAT included

    from 56.17 EUR VAT excluded

    To selection
  • Non-return valves for shipboard use, cut-off type, of cast iron, with flanges, DN 15 to DN 500

    Standard [CURRENT] 2017-11

    DIN 86252:2017-11

    Non-return valves for shipboard use, cut-off type, of cast iron, with flanges, DN 15 to DN 500

    This standard specifies the nominal dimensions, connection dimensions, masses and materials for non-return valves for shipboard use. It also contains statements on the design principles.

    Accessibility

    from 74.80 EUR VAT included

    from 69.91 EUR VAT excluded

    To selection
  • Remote control gear with transmission tube for manual operation - Symbols for schematic drawings

    Standard [CURRENT] 2017-11

    DIN 87378:2017-11

    Remote control gear with transmission tube for manual operation - Symbols for schematic drawings

    This standard defines symbols for the standardized components of remote control gear with transmission tube for fittings. These symbols are derived from the standardized components for remote ...

    Accessibility

    from 52.20 EUR VAT included

    from 48.79 EUR VAT excluded

    To selection
Note

If you leave this page your selected items will not be added to the selection. What do you want to do next?

Discard selection and go to the next page